diff options
Diffstat (limited to 'doc/gawk.info')
| -rw-r--r-- | doc/gawk.info | 3225 |
1 files changed, 1636 insertions, 1589 deletions
diff --git a/doc/gawk.info b/doc/gawk.info index f1aa1f4a..c41ef683 100644 --- a/doc/gawk.info +++ b/doc/gawk.info @@ -14,7 +14,7 @@ Free Software Foundation, Inc. This is Edition 4.1 of `GAWK: Effective AWK Programming: A User's -Guide for GNU Awk', for the 4.1.1 (or later) version of the GNU +Guide for GNU Awk', for the 4.1.2 (or later) version of the GNU implementation of AWK. Permission is granted to copy, distribute and/or modify this document @@ -42,7 +42,7 @@ Free Software Foundation, Inc. This is Edition 4.1 of `GAWK: Effective AWK Programming: A User's -Guide for GNU Awk', for the 4.1.1 (or later) version of the GNU +Guide for GNU Awk', for the 4.1.2 (or later) version of the GNU implementation of AWK. Permission is granted to copy, distribute and/or modify this document @@ -189,8 +189,8 @@ entitled "GNU Free Documentation License". * Regexp Field Splitting:: Using regexps as the field separator. * Single Character Fields:: Making each character a separate field. -* Command Line Field Separator:: Setting `FS' from the - command line. +* Command Line Field Separator:: Setting `FS' from the command + line. * Full Line Fields:: Making the full line be a single field. * Field Splitting Summary:: Some final points and a summary table. @@ -234,10 +234,12 @@ entitled "GNU Free Documentation License". * Printf Examples:: Several examples. * Redirection:: How to redirect output to multiple files and pipes. +* Special FD:: Special files for I/O. * Special Files:: File name interpretation in `gawk'. `gawk' allows access to inherited file descriptors. -* Special FD:: Special files for I/O. +* Other Inherited Files:: Accessing other open files with + `gawk'. * Special Network:: Special files for network communications. * Special Caveats:: Things to watch out for. @@ -350,12 +352,12 @@ entitled "GNU Free Documentation License". elements. * Controlling Scanning:: Controlling the order in which arrays are scanned. -* Delete:: The `delete' statement removes an - element from an array. * Numeric Array Subscripts:: How to use numbers as subscripts in `awk'. * Uninitialized Subscripts:: Using Uninitialized variables as subscripts. +* Delete:: The `delete' statement removes an + element from an array. * Multidimensional:: Emulating multidimensional arrays in `awk'. * Multiscanning:: Scanning multidimensional arrays. @@ -693,7 +695,7 @@ on Unix, I found the gray AWK book, a.k.a. Aho, Kernighan and Weinberger, `The AWK Programming Language', Addison-Wesley, 1988. AWK's simple programming paradigm--find a pattern in the input and then perform an action--often reduced complex or tedious data manipulations -to few lines of code. I was excited to try my hand at programming in +to a few lines of code. I was excited to try my hand at programming in AWK. Alas, the `awk' on my computer was a limited version of the @@ -779,8 +781,8 @@ with the proper options or environment variables (*note Options::), it is fully compatible with the POSIX(1) specification of the `awk' language and with the Unix version of `awk' maintained by Brian Kernighan. This means that all properly written `awk' programs should -work with `gawk'. Thus, we usually don't distinguish between `gawk' -and other `awk' implementations. +work with `gawk'. So most of the time, we don't distinguish between +`gawk' and other `awk' implementations. Using `awk' allows you to: @@ -803,9 +805,9 @@ and other `awk' implementations. * Perform simple network communications - * Profile and debug `awk' programs. + * Profile and debug `awk' programs - * Extend the language with functions written in C or C++. + * Extend the language with functions written in C or C++ This Info file teaches you about the `awk' language and how you can use it effectively. You should already be familiar with basic system @@ -818,9 +820,8 @@ different computing environments. This Info file, while describing the of `awk' called `gawk' (which stands for "GNU `awk'"). `gawk' runs on a broad range of Unix systems, ranging from Intel-architecture PC-based computers up through large-scale systems. `gawk' has also been ported -to Mac OS X, Microsoft Windows (all versions) and OS/2 PCs, and OpenVMS. -(Some other, obsolete systems to which `gawk' was once ported are no -longer supported and the code for those systems has been removed.) +to Mac OS X, Microsoft Windows (all versions) and OS/2 PCs, and +OpenVMS.(3) * Menu: @@ -840,11 +841,14 @@ longer supported and the code for those systems has been removed.) (1) The 2008 POSIX standard is accessible online at `http://www.opengroup.org/onlinepubs/9699919799/'. - (2) These commands are available on POSIX-compliant systems, as well -as on traditional Unix-based systems. If you are using some other + (2) These utilities are available on POSIX-compliant systems, as +well as on traditional Unix-based systems. If you are using some other operating system, you still need to be familiar with the ideas of I/O redirection and pipes. + (3) Some other, obsolete systems to which `gawk' was once ported are +no longer supported and the code for those systems has been removed. + File: gawk.info, Node: History, Next: Names, Up: Preface @@ -958,7 +962,7 @@ heading "sidebar." Most of the time, the examples use complete `awk' programs. Some of the more advanced sections show only the part of the `awk' program that -illustrates the concept currently being described. +illustrates the concept being described. While this Info file is aimed principally at people who have not been exposed to `awk', there is a lot of information here that even the `awk' @@ -1002,7 +1006,8 @@ described, as well as sorting arrays in `gawk'. It also describes how `gawk' provides arrays of arrays. *note Functions::, describes the built-in functions `awk' and `gawk' -provide, as well as how to define your own functions. +provide, as well as how to define your own functions. It also +discusses how `gawk' lets you call functions indirectly. Part II shows how to use `awk' and `gawk' for problem solving. There is lots of code here for you to read and learn from. It contains @@ -1457,21 +1462,21 @@ advice (from Douglas Adams's `The Hitchhiker's Guide to the Galaxy'), to keep you from worrying about the complexities of computer programming: - $ awk "BEGIN { print "Don\47t Panic!" }" + $ awk 'BEGIN { print "Don\47t Panic!" }' -| Don't Panic! `awk' executes statements associated with `BEGIN' before reading any input. If there are no other statements in your program, as is the case here, `awk' just stops, instead of trying to read input it doesn't -know how to process. The `\47' is a magic way of getting a single -quote into the program, without having to engage in ugly shell quoting -tricks. +know how to process. The `\47' is a magic way (explained later) of +getting a single quote into the program, without having to engage in +ugly shell quoting tricks. - NOTE: As a side note, if you use Bash as your shell, you should - execute the command `set +H' before running this program - interactively, to disable the C shell-style command history, which - treats `!' as a special character. We recommend putting this - command into your personal startup file. + NOTE: If you use Bash as your shell, you should execute the + command `set +H' before running this program interactively, to + disable the C shell-style command history, which treats `!' as a + special character. We recommend putting this command into your + personal startup file. This next simple `awk' program emulates the `cat' utility; it copies whatever you type on the keyboard to its standard output (why this @@ -1494,9 +1499,9 @@ File: gawk.info, Node: Long, Next: Executable Scripts, Prev: Read Terminal, 1.1.3 Running Long Programs --------------------------- -Sometimes your `awk' programs can be very long. In this case, it is -more convenient to put the program into a separate file. In order to -tell `awk' to use that file for its program, you type: +Sometimes `awk' programs are very long. In these cases, it is more +convenient to put the program into a separate file. In order to tell +`awk' to use that file for its program, you type: awk -f SOURCE-FILE INPUT-FILE1 INPUT-FILE2 ... @@ -1512,14 +1517,16 @@ into the file `advice'. Then this command: does the same thing as this one: - awk "BEGIN { print \"Don't Panic!\" }" + awk 'BEGIN { print "Don\47t Panic!" }' This was explained earlier (*note Read Terminal::). Note that you don't usually need single quotes around the file name that you specify with `-f', because most file names don't contain any of the shell's special characters. Notice that in `advice', the `awk' program did not have single quotes around it. The quotes are only needed for programs -that are provided on the `awk' command line. +that are provided on the `awk' command line. (Also, placing the +program in a file allows us to use a literal single quote in the program +text, instead of the magic `\47'.) If you want to clearly identify your `awk' program files as such, you can add the extension `.awk' to the file name. This doesn't affect @@ -1563,7 +1570,7 @@ program is written in `awk'. utility reads your program and then processes your data according to the instructions in your program. (This is different from a "compiled" language such as C, where your program is first compiled into machine -code that is executed directly by your system's hardware.) The `awk' +code that is executed directly by your system's processor.) The `awk' utility is thus termed an "interpreter". Many modern languages are interperted. @@ -1573,8 +1580,8 @@ to pass to that interpreter. The operating system then runs the interpreter with the given argument and the full argument list of the executed program. The first argument in the list is the full file name of the `awk' program. The rest of the argument list contains either -options to `awk', or data files, or both. Note that on many systems -`awk' may be found in `/usr/bin' instead of in `/bin'. Caveat Emptor. +options to `awk', or data files, or both. (Note that on many systems +`awk' may be found in `/usr/bin' instead of in `/bin'.) Some systems limit the length of the interpreter name to 32 characters. Often, this can be dealt with by using a symbolic link. @@ -1714,8 +1721,11 @@ the quoting rules. the characters `$', ``', `\', and `"', all of which must be preceded by a backslash within double-quoted text if they are to be passed on literally to the program. (The leading backslash is - stripped first.) Thus, the example seen in *note Read Terminal::, - is applicable: + stripped first.) Thus, the example seen in *note Read Terminal::: + + awk 'BEGIN { print "Don\47t Panic!" }' + + could instead be written this way: $ awk "BEGIN { print \"Don't Panic!\" }" -| Don't Panic! @@ -1781,6 +1791,9 @@ this: $ awk -v sq="'" 'BEGIN { print "Here is a single quote <" sq ">" }' -| Here is a single quote <'> + (Here, the two string constants and the value of `sq' are +concatenated into a single string which is printed by `print'.) + If you really need both single and double quotes in your `awk' program, it is probably best to move it into a separate file, where the shell won't be part of the picture, and you can say what you mean. @@ -1816,12 +1829,12 @@ The second data file, called `inventory-shipped', contains information about monthly shipments. In both files, each line is considered to be one "record". - In the data file `mail-list', each record contains the name of a -person, his/her phone number, his/her email-address, and a code for -their relationship with the author of the list. The columns are -aligned using spaces. An `A' in the last column means that the person -is an acquaintance. An `F' in the last column means that the person is -a friend. An `R' means that the person is a relative: + In `mail-list', each record contains the name of a person, his/her +phone number, his/her email-address, and a code for their relationship +with the author of the list. The columns are aligned using spaces. An +`A' in the last column means that the person is an acquaintance. An +`F' in the last column means that the person is a friend. An `R' means +that the person is a relative: Amelia 555-5553 amelia.zodiacusque@gmail.com F Anthony 555-3412 anthony.asserturo@hotmail.com A @@ -1939,7 +1952,7 @@ different ways to do the same things shown here: * Print the length of the longest line in `data': expand data | awk '{ if (x < length($0)) x = length($0) } - END { print "maximum line length is " x }' + END { print "maximum line length is " x }' This example differs slightly from the previous one: The input is processed by the `expand' utility to change TABs into spaces, so @@ -1962,7 +1975,7 @@ different ways to do the same things shown here: * Print the total number of bytes used by FILES: ls -l FILES | awk '{ x += $5 } - END { print "total bytes: " x }' + END { print "total bytes: " x }' * Print the total number of kilobytes used by FILES: @@ -1991,13 +2004,13 @@ File: gawk.info, Node: Two Rules, Next: More Complex, Prev: Very Simple, Up: ============================= The `awk' utility reads the input files one line at a time. For each -line, `awk' tries the patterns of each of the rules. If several -patterns match, then several actions execute in the order in which they -appear in the `awk' program. If no patterns match, then no actions run. +line, `awk' tries the patterns of each rule. If several patterns +match, then several actions execute in the order in which they appear +in the `awk' program. If no patterns match, then no actions run. After processing all the rules that match the line (and perhaps there are none), `awk' reads the next line. (However, *note Next -Statement::, and also *note Nextfile Statement::). This continues +Statement::, and also *note Nextfile Statement::.) This continues until the program reaches the end of the file. For example, the following `awk' program contains two rules: @@ -2061,11 +2074,11 @@ date the file was last modified. Its output looks like this: The first field contains read-write permissions, the second field contains the number of links to the file, and the third field -identifies the owner of the file. The fourth field identifies the group -of the file. The fifth field contains the size of the file in bytes. -The sixth, seventh, and eighth fields contain the month, day, and time, +identifies the file's owner. The fourth field identifies the file's +group. The fifth field contains the file's size in bytes. The sixth, +seventh, and eighth fields contain the month, day, and time, respectively, that the file was last modified. Finally, the ninth field -contains the file name.(1) +contains the file name. The `$6 == "Nov"' in our `awk' program is an expression that tests whether the sixth field of the output from `ls -l' matches the string @@ -2087,11 +2100,6 @@ displays your output. By manipulating fields and using `print' statements, you can produce some very useful and impressive-looking reports. - ---------- Footnotes ---------- - - (1) The `LC_ALL=C' is needed to produce this traditional-style -output from `ls'. - File: gawk.info, Node: Statements/Lines, Next: Other Features, Prev: More Complex, Up: Getting Started @@ -2388,7 +2396,7 @@ The following list describes options mandated by the POSIX standard: CAUTION: Using `-v' to set the values of the built-in variables may lead to surprising results. `awk' will reset the values of those variables as it needs to, possibly - ignoring any predefined value you may have given. + ignoring any initial value you may have given. `-W GAWK-OPT' Provide an implementation-specific option. This is the POSIX @@ -2439,9 +2447,9 @@ The following list describes options mandated by the POSIX standard: `-d'[FILE] `--dump-variables'[`='FILE] Print a sorted list of global variables, their types, and final - values to FILE. If no FILE is provided, print this list to the - file named `awkvars.out' in the current directory. No space is - allowed between the `-d' and FILE, if FILE is supplied. + values to FILE. If no FILE is provided, print this list to a file + named `awkvars.out' in the current directory. No space is allowed + between the `-d' and FILE, if FILE is supplied. Having a list of all global variables is a good way to look for typographical errors in your programs. You would also use this @@ -2504,7 +2512,7 @@ The following list describes options mandated by the POSIX standard: `-i' SOURCE-FILE `--include' SOURCE-FILE - Read `awk' source library from SOURCE-FILE. This option is + Read an `awk' source library from SOURCE-FILE. This option is completely equivalent to using the `@include' directive inside your program. This option is very similar to the `-f' option, but there are two important differences. First, when `-i' is used, @@ -2525,8 +2533,8 @@ The following list describes options mandated by the POSIX standard: not be specified in the extension name. The extension initialization routine should be named `dl_load()'. An alternative is to use the `@load' keyword inside the program to - load a shared library. This feature is described in detail in - *note Dynamic Extensions::. + load a shared library. This advanced feature is described in + detail in *note Dynamic Extensions::. `-L'[VALUE] `--lint'[`='VALUE] @@ -2562,6 +2570,8 @@ The following list describes options mandated by the POSIX standard: CAUTION: This option can severely break old programs. Use with care. + This option may disappear in a future version of `gawk'. + `-N' `--use-lc-numeric' Force the use of the locale's decimal point character when parsing @@ -2661,8 +2671,9 @@ it is, `awk' reads its program source from all of the named files, as if they had been concatenated together into one big file. This is useful for creating libraries of `awk' functions. These functions can be written once and then retrieved from a standard place, instead of -having to be included into each individual program. (As mentioned in -*note Definition Syntax::, function names must be unique.) +having to be included into each individual program. The `-i' option is +similar in this regard. (As mentioned in *note Definition Syntax::, +function names must be unique.) With standard `awk', library functions can still be used, even if the program is entered at the keyboard, by specifying `-f /dev/tty'. @@ -2719,14 +2730,17 @@ Any additional arguments on the command line are normally treated as input files to be processed in the order specified. However, an argument that has the form `VAR=VALUE', assigns the value VALUE to the variable VAR--it does not specify a file at all. (See *note Assignment -Options::.) +Options::.) In the following example, COUNT=1 is a variable assignment, +not a file name: - All these arguments are made available to your `awk' program in the -`ARGV' array (*note Built-in Variables::). Command-line options and -the program text (if present) are omitted from `ARGV'. All other -arguments, including variable assignments, are included. As each -element of `ARGV' is processed, `gawk' sets the variable `ARGIND' to -the index in `ARGV' of the current element. + awk -f program.awk file1 count=1 file2 + + All the command-line arguments are made available to your `awk' +program in the `ARGV' array (*note Built-in Variables::). Command-line +options and the program text (if present) are omitted from `ARGV'. All +other arguments, including variable assignments, are included. As +each element of `ARGV' is processed, `gawk' sets the variable `ARGIND' +to the index in `ARGV' of the current element. Changing `ARGC' and `ARGV' in your `awk' program lets you control how `awk' processes the input files; this is described in more detail @@ -2835,8 +2849,8 @@ variable. If that variable does not exist, `gawk' uses a default path, The search path feature is particularly helpful for building libraries of useful `awk' functions. The library files can be placed in a standard directory in the default path and then specified on the -command line with a short file name. Otherwise, the full file name -would have to be typed for each file. +command line with a short file name. Otherwise, you would have to type +the full file name for each file. By using the `-i' option, or the `-e' and `-f' options, your command-line `awk' programs can use facilities in `awk' library files @@ -2844,21 +2858,20 @@ command-line `awk' programs can use facilities in `awk' library files in compatibility mode. This is true for both `--traditional' and `--posix'. *Note Options::. - If the source code is not found after the initial search, the path -is searched again after adding the default `.awk' suffix to the file -name. + If the source code file is not found after the initial search, the +path is searched again after adding the default `.awk' suffix to the +file name. - NOTE: To include the current directory in the path, either place - `.' explicitly in the path or write a null entry in the path. (A - null entry is indicated by starting or ending the path with a - colon or by placing two colons next to each other [`::'].) This - path search mechanism is similar to the shell's. (See `The - Bourne-Again SHell manual'. - (http://www.gnu.org/software/bash/manual/)) + `gawk''s path search mechanism is similar to the shell's. (See `The +Bourne-Again SHell manual' (http://www.gnu.org/software/bash/manual/).) +It treats a null entry in the path as indicating the current directory. +(A null entry is indicated by starting or ending the path with a colon +or by placing two colons next to each other [`::'].) - However, `gawk' always looks in the current directory _before_ - searching `AWKPATH', so there is no real reason to include the - current directory in the search path. + NOTE: `gawk' always looks in the current directory _before_ + searching `AWKPATH'. Thus, while you can include the current + directory in the search path, either explicitly or with a null + entry, there is no real reason to do so. If `AWKPATH' is not defined in the environment, `gawk' places its default search path into `ENVIRON["AWKPATH"]'. This makes it easy to @@ -2905,15 +2918,6 @@ A number of other environment variables affect `gawk''s behavior, but they are more specialized. Those in the following list are meant to be used by regular users. -`POSIXLY_CORRECT' - Causes `gawk' to switch to POSIX compatibility mode, disabling all - traditional and GNU extensions. *Note Options::. - -`GAWK_SOCK_RETRIES' - Controls the number of times `gawk' attempts to retry a two-way - TCP/IP (socket) connection before giving up. *Note TCP/IP - Networking::. - `GAWK_MSEC_SLEEP' Specifies the interval between connection retries, in milliseconds. On systems that do not support the `usleep()' system @@ -2923,6 +2927,15 @@ used by regular users. Specifies the time, in milliseconds, for `gawk' to wait for input before returning with an error. *Note Read Timeout::. +`GAWK_SOCK_RETRIES' + Controls the number of times `gawk' attempts to retry a two-way + TCP/IP (socket) connection before giving up. *Note TCP/IP + Networking::. + +`POSIXLY_CORRECT' + Causes `gawk' to switch to POSIX compatibility mode, disabling all + traditional and GNU extensions. *Note Options::. + The environment variables in the following list are meant for use by the `gawk' developers for testing and tuning. They are subject to change. The variables are: @@ -2934,7 +2947,7 @@ change. The variables are: the value should be a number, and `gawk' uses that number as the size of the buffer to allocate. (When this variable is not set, `gawk' uses the smaller of the file's size and the "default" - blocksize, which is usually the filesystems I/O blocksize.) + blocksize, which is usually the filesystem's I/O blocksize.) `AWK_HASH' If this variable exists with a value of `gst', `gawk' switches to @@ -2948,11 +2961,11 @@ change. The variables are: where I/O is performed in records, not in blocks. `GAWK_MSG_SRC' - If this variable exists, `gawk' includes the source file name and - line number from which warning and/or fatal messages are - generated. Its purpose is to help isolate the source of a - message, since there can be multiple places which produce the same - warning or error message. + If this variable exists, `gawk' includes the file name and line + number within the `gawk' source code from which warning and/or + fatal messages are generated. Its purpose is to help isolate the + source of a message, since there are multiple places which produce + the same warning or error message. `GAWK_NO_DFA' If this variable exists, `gawk' does not use the DFA regexp matcher @@ -3126,7 +3139,8 @@ is useful for embedding inside an `awk' source file that requires access to an extension. *note Dynamic Extensions::, describes how to write extensions (in C -or C++) that can be loaded with either `@load' or the `-l' option. +or C++) that can be loaded with either `@load' or the `-l' option. It +also describes the `ordchr' extension. File: gawk.info, Node: Obsolete, Next: Undocumented, Prev: Loading Shared Libraries, Up: Invoking Gawk @@ -3177,7 +3191,8 @@ File: gawk.info, Node: Invoking Summary, Prev: Undocumented, Up: Invoking Gaw affects how `awk' processes input. * You can use a single minus sign (`-') to refer to standard input - on the command line. + on the command line. `gawk' also lets you use the special file + name `/dev/stdin'. * `gawk' pays attention to a number of environment variables. `AWKPATH', `AWKLIBPATH', and `POSIXLY_CORRECT' are the most @@ -3315,9 +3330,9 @@ or newline. While there is nothing to stop you from entering most unprintable characters directly in a string constant or regexp constant, they may look ugly. - The following table lists all the escape sequences used in `awk' and -what they represent. Unless noted otherwise, all these escape sequences -apply to both string constants and regexp constants: + The following list presents all the escape sequences used in `awk' +and what they represent. Unless noted otherwise, all these escape +sequences apply to both string constants and regexp constants: `\\' A literal backslash, `\'. @@ -3391,11 +3406,11 @@ normally be a regexp operator. For example, `/a\+b/' matches the three characters `a+b'. For complete portability, do not use a backslash before any -character not shown in the previous list. +character not shown in the previous list and that is not an operator. To summarize: - * The escape sequences in the table above are always processed first, + * The escape sequences in the list above are always processed first, for both string constants and regexp constants. This happens very early, as soon as `awk' reads your program. @@ -3453,7 +3468,7 @@ and converted into corresponding real characters as the very first step in processing regexps. Here is a list of metacharacters. All characters that are not escape -sequences and that are not listed in the table stand for themselves: +sequences and that are not listed in the following stand for themselves: `\' This is used to suppress the special meaning of a character when @@ -3641,8 +3656,8 @@ matches either `d' or `]'. Additionally, if you place `]' right after the opening `[', the closing bracket is treated as one of the characters to be matched. - This treatment of `\' in bracket expressions is compatible with -other `awk' implementations and is also mandated by POSIX. The regular + The treatment of `\' in bracket expressions is compatible with other +`awk' implementations and is also mandated by POSIX. The regular expressions in `awk' are a superset of the POSIX specification for Extended Regular Expressions (EREs). POSIX EREs are based on the regular expressions accepted by the traditional `egrep' utility. @@ -3730,10 +3745,11 @@ Consider the following: echo aaaabcd | awk '{ sub(/a+/, "<A>"); print }' - This example uses the `sub()' function (which we haven't discussed -yet; *note String Functions::) to make a change to the input record. -Here, the regexp `/a+/' indicates "one or more `a' characters," and the -replacement text is `<A>'. + This example uses the `sub()' function to make a change to the input +record. (`sub()' replaces the first instance of any text matched by +the first argument with the string provided as the second argument; +*note String Functions::). Here, the regexp `/a+/' indicates "one or +more `a' characters," and the replacement text is `<A>'. The input contains four `a' characters. `awk' (and POSIX) regular expressions always match the leftmost, _longest_ sequence of input @@ -3809,15 +3825,15 @@ constants," for several reasons: Using `\n' in Bracket Expressions of Dynamic Regexps - Some versions of `awk' do not allow the newline character to be used -inside a bracket expression for a dynamic regexp: + Some older versions of `awk' do not allow the newline character to +be used inside a bracket expression for a dynamic regexp: $ awk '$0 ~ "[ \t\n]"' error--> awk: newline in character class [ error--> ]... error--> source line number 1 error--> context is - error--> >>> <<< + error--> $0 ~ "[ >>> \t\n]" <<< But a newline in a regexp constant works with no problem: @@ -4025,10 +4041,6 @@ File: gawk.info, Node: Regexp Summary, Prev: Case-sensitivity, Up: Regexp Within bracket expressions, POSIX character classes let you specify certain groups of characters in a locale-independent fashion. - * `gawk''s `IGNORECASE' variable lets you control the case - sensitivity of regexp matching. In other `awk' versions, use - `tolower()' or `toupper()'. - * Regular expressions match the leftmost longest text in the string being matched. This matters for cases where you need to know the extent of the match, such as for text substitution and when the @@ -4037,6 +4049,10 @@ File: gawk.info, Node: Regexp Summary, Prev: Case-sensitivity, Up: Regexp * Matching expressions may use dynamic regexps, that is, string values treated as regular expressions. + * `gawk''s `IGNORECASE' variable lets you control the case + sensitivity of regexp matching. In other `awk' versions, use + `tolower()' or `toupper()'. + File: gawk.info, Node: Reading Files, Next: Printing, Prev: Regexp, Up: Top @@ -4090,7 +4106,7 @@ File: gawk.info, Node: Records, Next: Fields, Up: Reading Files `awk' divides the input for your program into records and fields. It keeps track of the number of records that have been read so far from the current input file. This value is stored in a built-in variable -called `FNR' which is reset to zero when a new file is started. +called `FNR' which is reset to zero every time a new file is started. Another built-in variable, `NR', records the total number of input records read so far from all data files. It starts at zero, but is never automatically reset to zero. @@ -4198,9 +4214,10 @@ character such as `/' is more likely to produce correct behavior in the majority of cases, but there are no guarantees. The moral is: Know Your Data. - There is one unusual case, that occurs when `gawk' is being fully -POSIX-compliant (*note Options::). Then, the following (extreme) -pipeline prints a surprising `1': + When using regular characters as the record separator, there is one +unusual case that occurs when `gawk' is being fully POSIX-compliant +(*note Options::). Then, the following (extreme) pipeline prints a +surprising `1': $ echo | gawk --posix 'BEGIN { RS = "a" } ; { print NF }' -| 1 @@ -4265,9 +4282,9 @@ trailing whitespace: -| ] The square brackets delineate the contents of `RT', letting you see the -leading and trailing whitespace. The final value of `RT' `RT' is a -newline. *Note Simple Sed::, for a more useful example of `RS' as a -regexp and `RT'. +leading and trailing whitespace. The final value of `RT' is a newline. +*Note Simple Sed::, for a more useful example of `RS' as a regexp and +`RT'. If you set `RS' to a regular expression that allows optional trailing text, such as `RS = "abc(XYZ)?"' it is possible, due to @@ -4282,13 +4299,13 @@ that this will never happen. the beginning and end of a _line_. As a result, something like `RS = "^[[:upper:]]"' can only match at the beginning of a file. This is because `gawk' views the input file as one long string - that happens to contain newline characters in it. It is thus best - to avoid anchor characters in the value of `RS'. + that happens to contain newline characters. It is thus best to + avoid anchor characters in the value of `RS'. The use of `RS' as a regular expression and the `RT' variable are `gawk' extensions; they are not available in compatibility mode (*note Options::). In compatibility mode, only the first character of the -value of `RS' is used to determine the end of the record. +value of `RS' determines the end of the record. `RS = "\0"' Is Not Portable @@ -4317,11 +4334,12 @@ terminator. In effect, this means that `RS = "\0"' is the same as `RS It happens that recent versions of `mawk' can use the NUL character as a record separator. However, this is a special case: `mawk' does not -allow embedded NUL characters in strings. +allow embedded NUL characters in strings. (This may change in a future +version of `mawk'.) - *Note Readfile Function::, for an interesting, portable way to read -whole files. If you are using `gawk', see *note Extension Sample -Readfile::, for another option. + *Note Readfile Function::, for an interesting way to read whole +files. If you are using `gawk', see *note Extension Sample Readfile::, +for another option. ---------- Footnotes ---------- @@ -4378,13 +4396,11 @@ examples: -| Julie 555-6699 julie.perscrutabor@skeeve.com F This example prints each record in the file `mail-list' whose first -field contains the string `li'. The operator `~' is called a "matching -operator" (*note Regexp Usage::); it tests whether a string (here, the -field `$1') matches a given regular expression. +field contains the string `li'. By contrast, the following example looks for `li' in _the entire -record_ and prints the first field and the last field for each matching -input record: +record_ and prints the first and last fields for each matching input +record: $ awk '/li/ { print $1, $NF }' mail-list -| Amelia F @@ -4560,12 +4576,12 @@ value six. value of `NF' and recomputes `$0'. (d.c.) Here is an example: $ echo a b c d e f | awk '{ print "NF =", NF; - > NF = 3; print $0 }' + > NF = 3; print $0 }' -| NF = 6 -| a b c CAUTION: Some versions of `awk' don't rebuild `$0' when `NF' is - decremented. Caveat emptor. + decremented. Finally, there are times when it is convenient to force `awk' to rebuild the entire record, using the current value of the fields and @@ -4590,8 +4606,8 @@ as it was read from the input. This includes any leading or trailing whitespace, and the exact whitespace (or other characters) that separate the fields. - It is a not-uncommon error to try to change the field separators in -a record simply by setting `FS' and `OFS', and then expecting a plain + It is a common error to try to change the field separators in a +record simply by setting `FS' and `OFS', and then expecting a plain `print' or `print $0' to print the modified record. But this does not work, since nothing was done to change the record @@ -4741,9 +4757,9 @@ play whenever `$0' is recomputed. For instance, study this pipeline: The first `print' statement prints the record as it was read, with leading whitespace intact. The assignment to `$2' rebuilds `$0' by concatenating `$1' through `$NF' together, separated by the value of -`OFS'. Because the leading whitespace was ignored when finding `$1', -it is not part of the new `$0'. Finally, the last `print' statement -prints the new `$0'. +`OFS' (which is a space by default). Because the leading whitespace +was ignored when finding `$1', it is not part of the new `$0'. +Finally, the last `print' statement prints the new `$0'. There is an additional subtlety to be aware of when using regular expressions for field splitting. It is not well-specified in the POSIX @@ -4758,7 +4774,7 @@ beginning of the record. `gawk' also works this way. For example: $ echo 'xxAA xxBxx C' | > gawk -F '(^x+)|( +)' '{ for (i = 1; i <= NF; i++) - > printf "-->%s<--\n", $i }' + > printf "-->%s<--\n", $i }' -| --><-- -| -->AA<-- -| -->xxBxx<-- @@ -4803,10 +4819,7 @@ For example: sets `FS' to the `,' character. Notice that the option uses an uppercase `F' instead of a lowercase `f'. The latter option (`-f') -specifies a file containing an `awk' program. Case is significant in -command-line options: the `-F' and `-f' options have nothing to do with -each other. You can use both options at the same time to set the `FS' -variable _and_ get an `awk' program from a file. +specifies a file containing an `awk' program. The value used for the argument to `-F' is processed in exactly the same way as assignments to the built-in variable `FS'. Any special @@ -4904,7 +4917,7 @@ occurrences of any two characters." If instead you want fields to be separated by a literal period followed by any single character, use `FS = "\\.."'. - The following table summarizes how fields are split, based on the + The following list summarizes how fields are split, based on the value of `FS' (`==' means "is equal to"): `FS == " "' @@ -4924,7 +4937,7 @@ value of `FS' (`==' means "is equal to"): `FS == ""' Each individual character in the record becomes a separate field. - (This is a `gawk' extension; it is not specified by the POSIX + (This is a common extension; it is not specified by the POSIX standard.) Changing `FS' Does Not Affect the Fields @@ -5295,7 +5308,7 @@ A simple program to process this file is as follows: ... *Note Labels Program::, for a more realistic program that deals with -address lists. The following table summarizes how records are split, +address lists. The following list summarizes how records are split, based on the value of `RS'. (`==' means "is equal to.") `RS == "\n"' @@ -5319,9 +5332,10 @@ based on the value of `RS'. (`==' means "is equal to.") records. (This is a `gawk' extension; it is not specified by the POSIX standard.) - In all cases, `gawk' sets `RT' to the input text that matched the -value specified by `RS'. But if the input file ended without any text -that matches `RS', then `gawk' sets `RT' to the null string. + If not in compatibility mode (*note Options::), `gawk' sets `RT' to +the input text that matched the value specified by `RS'. But if the +input file ended without any text that matches `RS', then `gawk' sets +`RT' to the null string. ---------- Footnotes ---------- @@ -5400,9 +5414,7 @@ processing on the next record _right now_. For example: while (j == 0) { # get more text if (getline <= 0) { - m = "unexpected EOF or error" - m = (m ": " ERRNO) - print m > "/dev/stderr" + print("unexpected EOF or error:", ERRNO) > "/dev/stderr" exit } # build up the line using string concatenation @@ -5605,9 +5617,9 @@ the program might produce: bill ttyp1 Jul 13 14:23 (murphy:0) bletch -Notice that this program ran the command `who' and printed the previous -result. (If you try this program yourself, you will of course get -different results, depending upon who is logged in on your system.) +Notice that this program ran the command `who' and printed the result. +(If you try this program yourself, you will of course get different +results, depending upon who is logged in on your system.) This variation of `getline' splits the record into fields, sets the value of `NF', and recomputes the value of `$0'. The values of `NR' @@ -5623,10 +5635,10 @@ all `awk' implementations. NOTE: Unfortunately, `gawk' has not been consistent in its treatment of a construct like `"echo " "date" | getline'. Most versions, including the current version, treat it at as `("echo " - "date") | getline'. (This how BWK `awk' behaves.) Some versions - changed and treated it as `"echo " ("date" | getline)'. (This is - how `mawk' behaves.) In short, _always_ use explicit parentheses, - and then you won't have to worry. + "date") | getline'. (This is also how BWK `awk' behaves.) Some + versions changed and treated it as `"echo " ("date" | getline)'. + (This is how `mawk' behaves.) In short, _always_ use explicit + parentheses, and then you won't have to worry. File: gawk.info, Node: Getline/Variable/Pipe, Next: Getline/Coprocess, Prev: Getline/Pipe, Up: Getline @@ -5646,7 +5658,7 @@ following program reads the current date and time into the variable } In this version of `getline', none of the built-in variables are -changed and the record is not split into fields. +changed and the record is not split into fields. However, `RT' is set. According to POSIX, `EXPRESSION | getline VAR' is ambiguous if EXPRESSION contains unparenthesized operators other than `$'; for @@ -5728,7 +5740,7 @@ in mind: `getline' command causes `awk' to set the value of `FILENAME'. Normally, `FILENAME' does not have a value inside `BEGIN' rules, because you have not yet started to process the command-line data - files. (d.c.) (*Note BEGIN/END::, also *note Auto-set::.) + files. (d.c.) (See *note BEGIN/END::; also *note Auto-set::.) * Using `FILENAME' with `getline' (`getline < FILENAME') is likely to be a source for confusion. `awk' opens a separate input stream @@ -5761,7 +5773,7 @@ in mind: `gawk' treats `getline' like a function call, and evaluates the expression `a[++c]' before attempting to read from `f'. However, some versions of `awk' only evaluate the expression once they know - that there is a string value to be assigned. Caveat Emptor. + that there is a string value to be assigned. File: gawk.info, Node: Getline Summary, Prev: Getline Notes, Up: Getline @@ -5774,19 +5786,18 @@ File: gawk.info, Node: Getline Summary, Prev: Getline Notes, Up: Getline whether the variant is standard or a `gawk' extension. Note: for each variant, `gawk' sets the `RT' built-in variable. -Variant Effect Standard / - Extension +Variant Effect `awk' / `gawk' ------------------------------------------------------------------------- -`getline' Sets `$0', `NF', `FNR', Standard +`getline' Sets `$0', `NF', `FNR', `awk' `NR', and `RT' -`getline' VAR Sets VAR, `FNR', `NR', and Standard +`getline' VAR Sets VAR, `FNR', `NR', and `awk' `RT' -`getline <' FILE Sets `$0', `NF', and `RT' Standard -`getline VAR < FILE' Sets VAR and `RT' Standard -COMMAND `| getline' Sets `$0', `NF', and `RT' Standard -COMMAND `| getline' VAR Sets VAR and `RT' Standard -COMMAND `|& getline' Sets `$0', `NF', and `RT' Extension -COMMAND `|& getline' Sets VAR and `RT' Extension +`getline <' FILE Sets `$0', `NF', and `RT' `awk' +`getline VAR < FILE' Sets VAR and `RT' `awk' +COMMAND `| getline' Sets `$0', `NF', and `RT' `awk' +COMMAND `| getline' VAR Sets VAR and `RT' `awk' +COMMAND `|& getline' Sets `$0', `NF', and `RT' `gawk' +COMMAND `|& getline' Sets VAR and `RT' `gawk' VAR Table 4.1: `getline' Variants and What They Set @@ -5802,7 +5813,7 @@ This minor node describes a feature that is specific to `gawk'. You may specify a timeout in milliseconds for reading input from the keyboard, a pipe, or two-way communication, including TCP/IP sockets. This can be done on a per input, command or connection basis, by -setting a special element in the `PROCINFO' (*note Auto-set::) array: +setting a special element in the `PROCINFO' array (*note Auto-set::): PROCINFO["input_name", "READ_TIMEOUT"] = TIMEOUT IN MILLISECONDS @@ -5826,9 +5837,9 @@ for more than five seconds: print $0 `gawk' terminates the read operation if input does not arrive after -waiting for the timeout period, returns failure and sets the `ERRNO' -variable to an appropriate string value. A negative or zero value for -the timeout is the same as specifying no timeout at all. +waiting for the timeout period, returns failure and sets `ERRNO' to an +appropriate string value. A negative or zero value for the timeout is +the same as specifying no timeout at all. A timeout can also be set for reading from the keyboard in the implicit loop that reads input records and matches them against @@ -5926,6 +5937,10 @@ File: gawk.info, Node: Input Summary, Next: Input Exercises, Prev: Command-li A regexp Text that matches the `gawk' regexp + * `FNR' indicates how many records have been read from the current + input file; `NR' indicates how many records have been read in + total. + * `gawk' sets `RT' to the text matched by `RS'. * After splitting the input into records, `awk' further splits the @@ -5943,32 +5958,31 @@ File: gawk.info, Node: Input Summary, Next: Input Exercises, Prev: Command-li * Field splitting is more complicated than record splitting. - Field separator value Fields are split ... `awk' / - `gawk' + Field separator value Fields are split ... `awk' / + `gawk' ---------------------------------------------------------------------- - `FS == " "' On runs of whitespace `awk' - `FS == ANY SINGLE On that character `awk' - CHARACTER' - `FS == REGEXP' On text matching the `awk' - regexp - `FS == ""' Each individual character `gawk' - is a separate field - `FIELDWIDTHS == LIST OF Based on character `gawk' - COLUMNS' position - `FPAT == REGEXP' On text around text `gawk' - matching the regexp - - Using `FS = "\n"' causes the entire record to be a single field + `FS == " "' On runs of whitespace `awk' + `FS == ANY SINGLE On that character `awk' + CHARACTER' + `FS == REGEXP' On text matching the regexp `awk' + `FS == ""' Each individual character is `gawk' + a separate field + `FIELDWIDTHS == LIST OF Based on character position `gawk' + COLUMNS' + `FPAT == REGEXP' On the text surrounding text `gawk' + matching the regexp + + * Using `FS = "\n"' causes the entire record to be a single field (assuming that newlines separate records). * `FS' may be set from the command line using the `-F' option. This can also be done using command-line variable assignment. - * `PROCINFO["FS"]' can be used to see how fields are being split. + * Use `PROCINFO["FS"]' to see how fields are being split. * Use `getline' in its various forms to read additional records, from the default input stream, from a file, or from a pipe or - co-process. + coprocess. * Use `PROCINFO[FILE, "READ_TIMEOUT"]' to cause reads to timeout for FILE. @@ -6026,6 +6040,7 @@ function. * Printf:: The `printf' statement. * Redirection:: How to redirect output to multiple files and pipes. +* Special FD:: Special files for I/O. * Special Files:: File name interpretation in `gawk'. `gawk' allows access to inherited file descriptors. @@ -6039,10 +6054,10 @@ File: gawk.info, Node: Print, Next: Print Examples, Up: Printing 5.1 The `print' Statement ========================= -The `print' statement is used for producing output with simple, -standardized formatting. You specify only the strings or numbers to -print, in a list separated by commas. They are output, separated by -single spaces, followed by a newline. The statement looks like this: +Use the `print' statement to produce output with simple, standardized +formatting. You specify only the strings or numbers to print, in a +list separated by commas. They are output, separated by single spaces, +followed by a newline. The statement looks like this: print ITEM1, ITEM2, ... @@ -6057,14 +6072,14 @@ Numeric values are converted to strings and then printed. The simple statement `print' with no items is equivalent to `print $0': it prints the entire current record. To print a blank line, use -`print ""', where `""' is the empty string. To print a fixed piece of -text, use a string constant, such as `"Don't Panic"', as one item. If -you forget to use the double-quote characters, your text is taken as an -`awk' expression, and you will probably get an error. Keep in mind -that a space is printed between any two items. +`print ""'. To print a fixed piece of text, use a string constant, +such as `"Don't Panic"', as one item. If you forget to use the +double-quote characters, your text is taken as an `awk' expression, and +you will probably get an error. Keep in mind that a space is printed +between any two items. Note that the `print' statement is a statement and not an -expression--you can't use it the pattern part of a pattern-action +expression--you can't use it in the pattern part of a PATTERN-ACTION statement, for example. @@ -6219,12 +6234,12 @@ to format numbers (or strings), and that there are a number of different ways in which numbers can be formatted. The different format specifications are discussed more fully in *note Control Letters::. - The built-in variable `OFMT' contains the default format -specification that `print' uses with `sprintf()' when it wants to -convert a number to a string for printing. The default value of `OFMT' -is `"%.6g"'. The way `print' prints numbers can be changed by -supplying different format specifications as the value of `OFMT', as -shown in the following example: + The built-in variable `OFMT' contains the format specification that +`print' uses with `sprintf()' when it wants to convert a number to a +string for printing. The default value of `OFMT' is `"%.6g"'. The way +`print' prints numbers can be changed by supplying a different format +specification for the value of `OFMT', as shown in the following +example: $ awk 'BEGIN { > OFMT = "%.0f" # print numbers as integers (rounds) @@ -6246,8 +6261,6 @@ by `print', use `printf'. With `printf' you can specify the width to use for each item, as well as various formatting choices for numbers (such as what output base to use, whether to print an exponent, whether to print a sign, and how many digits to print after the decimal point). -You do this by supplying a string, called the "format string", that -controls how and where to print the other arguments. * Menu: @@ -6266,10 +6279,10 @@ A simple `printf' statement looks like this: printf FORMAT, ITEM1, ITEM2, ... -The entire list of arguments may optionally be enclosed in parentheses. -The parentheses are necessary if any of the item expressions use the `>' -relational operator; otherwise, it can be confused with an output -redirection (*note Redirection::). +As print `print', the entire list of arguments may optionally be +enclosed in parentheses. Here too, the parentheses are necessary if any +of the item expressions use the `>' relational operator; otherwise, it +can be confused with an output redirection (*note Redirection::). The difference between `printf' and `print' is the FORMAT argument. This is an expression whose value is taken as a string; it specifies @@ -6290,10 +6303,10 @@ statements. For example: $ awk 'BEGIN { > ORS = "\nOUCH!\n"; OFS = "+" - > msg = "Dont Panic!" + > msg = "Don\47t Panic!" > printf "%s\n", msg > }' - -| Dont Panic! + -| Don't Panic! Here, neither the `+' nor the `OUCH' appear in the output message. @@ -6311,9 +6324,9 @@ print. The rest of the format specifier is made up of optional width. Here is a list of the format-control letters: `%c' - Print a number as an ASCII character; thus, `printf "%c", 65' - outputs the letter `A'. The output for a string value is the first - character of the string. + Print a number as a character; thus, `printf "%c", 65' outputs the + letter `A'. The output for a string value is the first character + of the string. NOTE: The POSIX standard says the first character of a string is printed. In locales with multibyte characters, `gawk' @@ -6406,7 +6419,7 @@ File: gawk.info, Node: Format Modifiers, Next: Printf Examples, Prev: Control A format specification can also include "modifiers" that can control how much of the item's value is printed, as well as how much space it gets. The modifiers come between the `%' and the format-control letter. -We will use the bullet symbol "*" in the following examples to represent +We use the bullet symbol "*" in the following examples to represent spaces in the output. Here are the possible modifiers, in the order in which they may appear: @@ -6426,8 +6439,7 @@ which they may appear: At first glance, this feature doesn't seem to be of much use. It is in fact a `gawk' extension, intended for use in translating messages at runtime. *Note Printf Ordering::, which describes how - and why to use positional specifiers. For now, we will not use - them. + and why to use positional specifiers. For now, we ignore them. `-' The minus sign, used before the width modifier (see later on in @@ -6457,10 +6469,10 @@ which they may appear: trailing zeros are not removed from the result. `0' - A leading `0' (zero) acts as a flag that indicates that output - should be padded with zeros instead of spaces. This applies only - to the numeric output formats. This flag only has an effect when - the field width is wider than the value to print. + A leading `0' (zero) acts as a flag indicating that output should + be padded with zeros instead of spaces. This applies only to the + numeric output formats. This flag only has an effect when the + field width is wider than the value to print. `'' A single quote or apostrophe character is a POSIX extension to ISO @@ -6608,14 +6620,14 @@ beginning of the `awk' program: awk 'BEGIN { print "Name Number" print "---- ------" } - { printf "%-10s %s\n", $1, $2 }' mail-list + { printf "%-10s %s\n", $1, $2 }' mail-list The above example mixes `print' and `printf' statements in the same program. Using just `printf' statements can produce the same results: awk 'BEGIN { printf "%-10s %s\n", "Name", "Number" printf "%-10s %s\n", "----", "------" } - { printf "%-10s %s\n", $1, $2 }' mail-list + { printf "%-10s %s\n", $1, $2 }' mail-list Printing each column heading with the same format specification used for the column elements ensures that the headings are aligned just like @@ -6627,10 +6639,10 @@ be emphasized by storing it in a variable, like this: awk 'BEGIN { format = "%-10s %s\n" printf format, "Name", "Number" printf format, "----", "------" } - { printf format, $1, $2 }' mail-list + { printf format, $1, $2 }' mail-list -File: gawk.info, Node: Redirection, Next: Special Files, Prev: Printf, Up: Printing +File: gawk.info, Node: Redirection, Next: Special FD, Prev: Printf, Up: Printing 5.6 Redirecting Output of `print' and `printf' ============================================== @@ -6640,7 +6652,7 @@ output, usually the screen. Both `print' and `printf' can also send their output to other places. This is called "redirection". NOTE: When `--sandbox' is specified (*note Options::), redirecting - output to files and pipes is disabled. + output to files, pipes and coprocesses is disabled. A redirection appears after the `print' or `printf' statement. Redirections in `awk' are written just like redirections in shell @@ -6711,16 +6723,10 @@ work identically for `printf': maintenance: report = "mail bug-system" - print "Awk script failed:", $0 | report - m = ("at record number " FNR " of " FILENAME) - print m | report + print("Awk script failed:", $0) | report + print("at record number", FNR, "of", FILENAME) | report close(report) - The message is built using string concatenation and saved in the - variable `m'. It's then sent down the pipeline to the `mail' - program. (The parentheses group the items to concatenate--see - *note Concatenation::.) - The `close()' function is called here because it's a good idea to close the pipe as soon as all the intended output has been sent to it. *Note Close Files And Pipes::, for more information. @@ -6787,39 +6793,26 @@ The program builds up a list of command lines, using the `mv' utility to rename the files. It then sends the list to the shell for execution. -File: gawk.info, Node: Special Files, Next: Close Files And Pipes, Prev: Redirection, Up: Printing - -5.7 Special File Names in `gawk' -================================ - -`gawk' provides a number of special file names that it interprets -internally. These file names provide access to standard file -descriptors and TCP/IP networking. +File: gawk.info, Node: Special FD, Next: Special Files, Prev: Redirection, Up: Printing -* Menu: - -* Special FD:: Special files for I/O. -* Special Network:: Special files for network communications. -* Special Caveats:: Things to watch out for. - - -File: gawk.info, Node: Special FD, Next: Special Network, Up: Special Files - -5.7.1 Special Files for Standard Descriptors --------------------------------------------- +5.7 Special Files for Standard Pre-Opened Data Streams +====================================================== Running programs conventionally have three input and output streams already available to them for reading and writing. These are known as the "standard input", "standard output", and "standard error output". -These streams are, by default, connected to your keyboard and screen, -but they are often redirected with the shell, via the `<', `<<', `>', -`>>', `>&', and `|' operators. Standard error is typically used for -writing error messages; the reason there are two separate streams, +These open streams (and any other open file or pipe) are often referred +to by the technical term "file descriptors". + + These streams are, by default, connected to your keyboard and +screen, but they are often redirected with the shell, via the `<', `<<', +`>', `>>', `>&', and `|' operators. Standard error is typically used +for writing error messages; the reason there are two separate streams, standard output and standard error, is so that they can be redirected separately. - In other implementations of `awk', the only way to write an error -message to standard error in an `awk' program is as follows: + In traditional implementations of `awk', the only way to write an +error message to standard error in an `awk' program is as follows: print "Serious error detected!" | "cat 1>&2" @@ -6834,19 +6827,18 @@ error messages to the screen, like this: (`/dev/tty' is a special file supplied by the operating system that is connected to your keyboard and screen. It represents the "terminal,"(1) which on modern systems is a keyboard and screen, not a serial console.) -This usually has the same effect but not always: although the standard -error stream is usually the screen, it can be redirected; when that -happens, writing to the screen is not correct. In fact, if `awk' is -run from a background job, it may not have a terminal at all. Then +This generally has the same effect but not always: although the +standard error stream is usually the screen, it can be redirected; when +that happens, writing to the screen is not correct. In fact, if `awk' +is run from a background job, it may not have a terminal at all. Then opening `/dev/tty' fails. - `gawk' provides special file names for accessing the three standard -streams. (c.e.) It also provides syntax for accessing any other -inherited open files. If the file name matches one of these special -names when `gawk' redirects input or output, then it directly uses the -stream that the file name stands for. These special file names work -for all operating systems that `gawk' has been ported to, not just -those that are POSIX-compliant: + `gawk', BWK `awk' and `mawk' provide special file names for +accessing the three standard streams. If the file name matches one of +these special names when `gawk' (or one of the others) redirects input +or output, then it directly uses the descriptor that the file name +stands for. These special file names work for all operating systems +that `gawk' has been ported to, not just those that are POSIX-compliant: `/dev/stdin' The standard input (file descriptor 0). @@ -6857,16 +6849,8 @@ those that are POSIX-compliant: `/dev/stderr' The standard error output (file descriptor 2). -`/dev/fd/N' - The file associated with file descriptor N. Such a file must be - opened by the program initiating the `awk' execution (typically - the shell). Unless special pains are taken in the shell from which - `gawk' is invoked, only descriptors 0, 1, and 2 are available. - - The file names `/dev/stdin', `/dev/stdout', and `/dev/stderr' are -aliases for `/dev/fd/0', `/dev/fd/1', and `/dev/fd/2', respectively. -However, they are more self-explanatory. The proper way to write an -error message in a `gawk' program is to use `/dev/stderr', like this: + With these facilities, the proper way to write an error message then +becomes: print "Serious error detected!" > "/dev/stderr" @@ -6874,21 +6858,60 @@ error message in a `gawk' program is to use `/dev/stderr', like this: redirection, the value must be a string. It is a common error to omit the quotes, which leads to confusing results. - Finally, using the `close()' function on a file name of the form -`"/dev/fd/N"', for file descriptor numbers above two, does actually -close the given file descriptor. - - The `/dev/stdin', `/dev/stdout', and `/dev/stderr' special files are -also recognized internally by several other versions of `awk'. + `gawk' does not treat these file names as special when in POSIX +compatibility mode. However, since BWK `awk' supports them, `gawk' does +support them even when invoked with the `--traditional' option (*note +Options::). ---------- Footnotes ---------- (1) The "tty" in `/dev/tty' stands for "Teletype," a serial terminal. -File: gawk.info, Node: Special Network, Next: Special Caveats, Prev: Special FD, Up: Special Files +File: gawk.info, Node: Special Files, Next: Close Files And Pipes, Prev: Special FD, Up: Printing + +5.8 Special File Names in `gawk' +================================ + +Besides access to standard input, stanard output, and standard error, +`gawk' provides access to any open file descriptor. Additionally, +there are special file names reserved for TCP/IP networking. + +* Menu: + +* Other Inherited Files:: Accessing other open files with + `gawk'. +* Special Network:: Special files for network communications. +* Special Caveats:: Things to watch out for. + + +File: gawk.info, Node: Other Inherited Files, Next: Special Network, Up: Special Files + +5.8.1 Accessing Other Open Files With `gawk' +-------------------------------------------- + +Besides the `/dev/stdin', `/dev/stdout', and `/dev/stderr' special file +names mentioned earlier, `gawk' provides syntax for accessing any other +inherited open file: + +`/dev/fd/N' + The file associated with file descriptor N. Such a file must be + opened by the program initiating the `awk' execution (typically + the shell). Unless special pains are taken in the shell from which + `gawk' is invoked, only descriptors 0, 1, and 2 are available. + + The file names `/dev/stdin', `/dev/stdout', and `/dev/stderr' are +essentially aliases for `/dev/fd/0', `/dev/fd/1', and `/dev/fd/2', +respectively. However, those names are more self-explanatory. + + Note that using `close()' on a file name of the form `"/dev/fd/N"', +for file descriptor numbers above two, does actually close the given +file descriptor. + + +File: gawk.info, Node: Special Network, Next: Special Caveats, Prev: Other Inherited Files, Up: Special Files -5.7.2 Special Files for Network Communications +5.8.2 Special Files for Network Communications ---------------------------------------------- `gawk' programs can open a two-way TCP/IP connection, acting as either @@ -6908,14 +6931,18 @@ mentioned here only for completeness. Full discussion is delayed until File: gawk.info, Node: Special Caveats, Prev: Special Network, Up: Special Files -5.7.3 Special File Name Caveats +5.8.3 Special File Name Caveats ------------------------------- -Here is a list of things to bear in mind when using the special file -names that `gawk' provides: +Here are some things to bear in mind when using the special file names +that `gawk' provides: - * Recognition of these special file names is disabled if `gawk' is in - compatibility mode (*note Options::). + * Recognition of the file names for the three standard pre-opened + files is disabled only in POSIX mode. + + * Recognition of the other special file names is disabled if `gawk' + is in compatibility mode (either `--traditional' or `--posix'; + *note Options::). * `gawk' _always_ interprets these special file names. For example, using `/dev/fd/4' for output actually writes on file descriptor 4, @@ -6928,7 +6955,7 @@ names that `gawk' provides: File: gawk.info, Node: Close Files And Pipes, Next: Output Summary, Prev: Special Files, Up: Printing -5.8 Closing Input and Output Redirections +5.9 Closing Input and Output Redirections ========================================= If the same file name or the same shell command is used with `getline' @@ -7042,7 +7069,8 @@ addition, `gawk' sets `ERRNO' to a string indicating the error. Note also that `close(FILENAME)' has no "magic" effects on the implicit loop that reads through the files named on the command line. It is, more likely, a close of a file that was never opened with a -redirection, so `awk' silently does nothing. +redirection, so `awk' silently does nothing, except return a negative +value. When using the `|&' operator to communicate with a coprocess, it is occasionally useful to be able to close one end of the two-way pipe @@ -7051,8 +7079,8 @@ to `close()'. As in any other call to `close()', the first argument is the name of the command or special file used to start the coprocess. The second argument should be a string, with either of the values `"to"' or `"from"'. Case does not matter. As this is an advanced -feature, a more complete discussion is delayed until *note Two-way -I/O::, which discusses it in more detail and gives an example. +feature, discussion is delayed until *note Two-way I/O::, which +describes it in more detail and gives an example. Using `close()''s Return Value @@ -7095,8 +7123,8 @@ value. File: gawk.info, Node: Output Summary, Next: Output Exercises, Prev: Close Files And Pipes, Up: Printing -5.9 Summary -=========== +5.10 Summary +============ * The `print' statement prints comma-separated expressions. Each expression is separated by the value of `OFS' and terminated by @@ -7108,20 +7136,20 @@ File: gawk.info, Node: Output Summary, Next: Output Exercises, Prev: Close Fi flags that modify the behavior of the format control letters. * Output from both `print' and `printf' may be redirected to files, - pipes, and co-processes. + pipes, and coprocesses. * `gawk' provides special file names for access to standard input, output and error, and for network communications. - * Use `close()' to close open file, pipe and co-process redirections. - For co-processes, it is possible to close only one direction of the + * Use `close()' to close open file, pipe and coprocess redirections. + For coprocesses, it is possible to close only one direction of the communications. File: gawk.info, Node: Output Exercises, Prev: Output Summary, Up: Printing -5.10 Exercises +5.11 Exercises ============== 1. Rewrite the program: @@ -7351,7 +7379,7 @@ and: are exactly equivalent. One rather bizarre consequence of this rule is that the following Boolean expression is valid, but does not do what -the user probably intended: +its author probably intended: # Note that /foo/ is on the left of the ~ if (/foo/ ~ $1) print "found foo" @@ -7377,9 +7405,10 @@ of the `match()' function, and as the third argument of the `split()' and `patsplit()' functions (*note String Functions::). Modern implementations of `awk', including `gawk', allow the third argument of `split()' to be a regexp constant, but some older implementations do -not. (d.c.) This can lead to confusion when attempting to use regexp -constants as arguments to user-defined functions (*note User-defined::). -For example: +not. (d.c.) Because some built-in functions accept regexp constants +as arguments, it can be confusing when attempting to use regexp +constants as arguments to user-defined functions (*note +User-defined::). For example: function mysub(pat, repl, str, global) { @@ -7443,7 +7472,7 @@ variable's current value. Variables are given new values with "assignment operators", "increment operators", and "decrement operators". *Note Assignment Ops::. In addition, the `sub()' and `gsub()' functions can change a variable's value, and the `match()', -`patsplit()' and `split()' functions can change the contents of their +`split()' and `patsplit()' functions can change the contents of their array parameters. *Note String Functions::. A few variables have special built-in meanings, such as `FS' (the @@ -7458,8 +7487,8 @@ uppercase. The kind of value a variable holds can change over the life of a program. By default, variables are initialized to the empty string, which is zero if converted to a number. There is no need to explicitly -"initialize" a variable in `awk', which is what you would do in C and -in most other traditional languages. +initialize a variable in `awk', which is what you would do in C and in +most other traditional languages. File: gawk.info, Node: Assignment Options, Prev: Using Variables, Up: Variables @@ -7634,7 +7663,7 @@ difference in behavior, on a GNU/Linux system: The `en_DK.utf-8' locale is for English in Denmark, where the comma acts as the decimal point separator. In the normal `"C"' locale, `gawk' -treats `4,321' as `4', while in the Danish locale, it's treated as the +treats `4,321' as 4, while in the Danish locale, it's treated as the full number, 4.321. Some earlier versions of `gawk' fully complied with this aspect of @@ -8017,8 +8046,7 @@ A workaround is: awk '/[=]=/' /dev/null - `gawk' does not have this problem; BWK `awk' and `mawk' also do not -(*note Other Versions::). + `gawk' does not have this problem; BWK `awk' and `mawk' also do not. File: gawk.info, Node: Increment Ops, Prev: Assignment Ops, Up: All Operators @@ -8195,9 +8223,9 @@ determine how they are compared. Variable typing follows these rules: STRING attribute. * Fields, `getline' input, `FILENAME', `ARGV' elements, `ENVIRON' - elements, and the elements of an array created by `patsplit()', - `split()' and `match()' that are numeric strings have the STRNUM - attribute. Otherwise, they have the STRING attribute. + elements, and the elements of an array created by `match()', + `split()' and `patsplit()' that are numeric strings have the + STRNUM attribute. Otherwise, they have the STRING attribute. Uninitialized variables also have the STRNUM attribute. * Attributes propagate across assignments but are not changed by any @@ -8247,21 +8275,21 @@ In contrast, the eight characters `" +3.14"' appearing in program text comprise a string constant. The following examples print `1' when the comparison between the two different constants is true, `0' otherwise: - $ echo ' +3.14' | gawk '{ print $0 == " +3.14" }' True + $ echo ' +3.14' | awk '{ print($0 == " +3.14") }' True -| 1 - $ echo ' +3.14' | gawk '{ print $0 == "+3.14" }' False + $ echo ' +3.14' | awk '{ print($0 == "+3.14") }' False -| 0 - $ echo ' +3.14' | gawk '{ print $0 == "3.14" }' False + $ echo ' +3.14' | awk '{ print($0 == "3.14") }' False -| 0 - $ echo ' +3.14' | gawk '{ print $0 == 3.14 }' True + $ echo ' +3.14' | awk '{ print($0 == 3.14) }' True -| 1 - $ echo ' +3.14' | gawk '{ print $1 == " +3.14" }' False + $ echo ' +3.14' | awk '{ print($1 == " +3.14") }' False -| 0 - $ echo ' +3.14' | gawk '{ print $1 == "+3.14" }' True + $ echo ' +3.14' | awk '{ print($1 == "+3.14") }' True -| 1 - $ echo ' +3.14' | gawk '{ print $1 == "3.14" }' False + $ echo ' +3.14' | awk '{ print($1 == "3.14") }' False -| 0 - $ echo ' +3.14' | gawk '{ print $1 == 3.14 }' True + $ echo ' +3.14' | awk '{ print($1 == 3.14) }' True -| 1 @@ -8314,8 +8342,9 @@ Unless `b' happens to be zero or the null string, the `if' part of the test always succeeds. Because the operators are so similar, this kind of error is very difficult to spot when scanning the source code. - The following table of expressions illustrates the kind of comparison -`gawk' performs, as well as what the result of the comparison is: + The following list of expressions illustrates the kinds of +comparisons `awk' performs, as well as what the result of each +comparison is: `1.5 <= 2.0' numeric comparison (true) @@ -8366,9 +8395,9 @@ regexp constant (`/'...`/') or an ordinary expression. In the latter case, the value of the expression as a string is used as a dynamic regexp (*note Regexp Usage::; also *note Computed Regexps::). - In modern implementations of `awk', a constant regular expression in -slashes by itself is also an expression. The regexp `/REGEXP/' is an -abbreviation for the following comparison expression: + A constant regular expression in slashes by itself is also an +expression. The regexp `/REGEXP/' is an abbreviation for the following +comparison expression: $0 ~ /REGEXP/ @@ -8384,9 +8413,9 @@ File: gawk.info, Node: POSIX String Comparison, Prev: Comparison Operators, U The POSIX standard says that string comparison is performed based on the locale's "collating order". This is the order in which characters -sort, as defined by the locale (for more discussion, *note Ranges and -Locales::). This order is usually very different from the results -obtained when doing straight character-by-character comparison.(1) +sort, as defined by the locale (for more discussion, *note Locales::). +This order is usually very different from the results obtained when +doing straight character-by-character comparison.(1) Because this behavior differs considerably from existing practice, `gawk' only implements it when in POSIX mode (*note Options::). Here @@ -8443,13 +8472,15 @@ Boolean operators are: `BOOLEAN1 || BOOLEAN2' True if at least one of BOOLEAN1 or BOOLEAN2 is true. For example, the following statement prints all records in the input - that contain _either_ `edu' or `li' or both: + that contain _either_ `edu' or `li': if ($0 ~ /edu/ || $0 ~ /li/) print The subexpression BOOLEAN2 is evaluated only if BOOLEAN1 is false. This can make a difference when BOOLEAN2 contains expressions that - have side effects. + have side effects. (Thus, this test never really distinguishes + records that contain both `edu' and `li'--as soon as `edu' is + matched, the full test succeeds.) `! BOOLEAN' True if BOOLEAN is false. For example, the following program @@ -8457,7 +8488,7 @@ Boolean operators are: variable is not defined: BEGIN { if (! ("HOME" in ENVIRON)) - print "no home!" } + print "no home!" } (The `in' operator is described in *note Reference to Elements::.) @@ -8680,7 +8711,7 @@ violates the precedence rules; for example, `$$0++--' is not a valid expression because the first `$' has higher precedence than the `++'; to avoid the problem the expression can be rewritten as `$($0++)--'. - This table presents `awk''s operators, in order of highest to lowest + This list presents `awk''s operators, in order of highest to lowest precedence: `('...`)' @@ -8755,8 +8786,8 @@ system about the local character set and language. The ISO C standard defines a default `"C"' locale, which is an environment that is typical of what many C programmers are used to. - Once upon a time, the locale setting used to affect regexp matching -(*note Ranges and Locales::), but this is no longer true. + Once upon a time, the locale setting used to affect regexp matching, +but this is no longer true (*note Ranges and Locales::). Locales can affect record splitting. For the normal case of `RS = "\n"', the locale is largely irrelevant. For other single-character @@ -8808,10 +8839,11 @@ File: gawk.info, Node: Expressions Summary, Prev: Locales, Up: Expressions * `awk' provides the usual arithmetic operators (addition, subtraction, multiplication, division, modulus), and unary plus and minus. It also provides comparison operators, boolean - operators, and regexp matching operators. String concatenation is - accomplished by placing two expressions next to each other; there - is no explicit operator. The three-operand `?:' operator provides - an "if-else" test within expressions. + operators, array membership testing, and regexp matching + operators. String concatenation is accomplished by placing two + expressions next to each other; there is no explicit operator. + The three-operand `?:' operator provides an "if-else" test within + expressions. * Assignment operators provide convenient shorthands for common arithmetic operations. @@ -8819,8 +8851,8 @@ File: gawk.info, Node: Expressions Summary, Prev: Locales, Up: Expressions * In `awk', a value is considered to be true if it is non-zero _or_ non-null. Otherwise, the value is false. - * A value's type is set upon each assignment and may change over its - lifetime. The type determines how it behaves in comparisons + * A variable's type is set upon each assignment and may change over + its lifetime. The type determines how it behaves in comparisons (string or numeric). * Function calls return a value which may be used as part of a larger @@ -8891,7 +8923,7 @@ summary of the types of `awk' patterns: number) or non-null (if a string). (*Note Expression Patterns::.) `BEGPAT, ENDPAT' - A pair of patterns separated by a comma, specifying a range of + A pair of patterns separated by a comma, specifying a "range" of records. The range includes both the initial record that matches BEGPAT and the final record that matches ENDPAT. (*Note Ranges::.) @@ -9102,7 +9134,7 @@ input is read. For example: $ awk ' > BEGIN { print "Analysis of \"li\"" } - > /li/ { ++n } + > /li/ { ++n } > END { print "\"li\" appears in", n, "records." }' mail-list -| Analysis of "li" -| "li" appears in 4 records. @@ -9171,9 +9203,10 @@ and `NF' were _undefined_ inside an `END' rule. The POSIX standard specifies that `NF' is available in an `END' rule. It contains the number of fields from the last input record. Most probably due to an oversight, the standard does not say that `$0' is also preserved, -although logically one would think that it should be. In fact, `gawk' -does preserve the value of `$0' for use in `END' rules. Be aware, -however, that BWK `awk', and possibly other implementations, do not. +although logically one would think that it should be. In fact, all of +BWK `awk', `mawk', and `gawk' preserve the value of `$0' for use in +`END' rules. Be aware, however, that some other implementations and +many older versions of Unix `awk' do not. The third point follows from the first two. The meaning of `print' inside a `BEGIN' or `END' rule is the same as always: `print $0'. If @@ -9242,9 +9275,9 @@ makes it possible to catch and process I/O errors at the level of the `awk' program. The `next' statement (*note Next Statement::) is not allowed inside -either a `BEGINFILE' or and `ENDFILE' rule. The `nextfile' statement -(*note Nextfile Statement::) is allowed only inside a `BEGINFILE' rule, -but not inside an `ENDFILE' rule. +either a `BEGINFILE' or an `ENDFILE' rule. The `nextfile' statement is +allowed only inside a `BEGINFILE' rule, but not inside an `ENDFILE' +rule. The `getline' statement (*note Getline::) is restricted inside both `BEGINFILE' and `ENDFILE': only redirected forms of `getline' are @@ -9279,9 +9312,9 @@ hold a pattern that the `awk' program searches for. There are two ways to get the value of the shell variable into the body of the `awk' program. - The most common method is to use shell quoting to substitute the -variable's value into the program inside the script. For example, -consider the following program: + A common method is to use shell quoting to substitute the variable's +value into the program inside the script. For example, consider the +following program: printf "Enter search pattern: " read pattern @@ -9472,18 +9505,18 @@ thing the `while' statement does is test the CONDITION. If the CONDITION is true, it executes the statement BODY. (The CONDITION is true when the value is not zero and not a null string.) After BODY has been executed, CONDITION is tested again, and if it is still true, BODY -is executed again. This process repeats until the CONDITION is no -longer true. If the CONDITION is initially false, the body of the loop -is never executed and `awk' continues with the statement following the -loop. This example prints the first three fields of each record, one -per line: - - awk '{ - i = 1 - while (i <= 3) { - print $i - i++ - } +executes again. This process repeats until the CONDITION is no longer +true. If the CONDITION is initially false, the body of the loop never +executes and `awk' continues with the statement following the loop. +This example prints the first three fields of each record, one per line: + + awk ' + { + i = 1 + while (i <= 3) { + print $i + i++ + } }' inventory-shipped The body of this loop is a compound statement enclosed in braces, @@ -9514,22 +9547,22 @@ the CONDITION is true. It looks like this: BODY while (CONDITION) - Even if the CONDITION is false at the start, the BODY is executed at + Even if the CONDITION is false at the start, the BODY executes at least once (and only once, unless executing BODY makes CONDITION true). Contrast this with the corresponding `while' statement: while (CONDITION) - BODY + BODY This statement does not execute BODY even once if the CONDITION is false to begin with. The following is an example of a `do' statement: { - i = 1 - do { - print $0 - i++ - } while (i <= 10) + i = 1 + do { + print $0 + i++ + } while (i <= 10) } This program prints each input record 10 times. However, it isn't a @@ -9558,9 +9591,10 @@ INCREMENT. Typically, INITIALIZATION sets a variable to either zero or one, INCREMENT adds one to it, and CONDITION compares it against the desired number of iterations. For example: - awk '{ - for (i = 1; i <= 3; i++) - print $i + awk ' + { + for (i = 1; i <= 3; i++) + print $i }' inventory-shipped This prints the first three fields of each input record, with one field @@ -9584,7 +9618,7 @@ whatsoever. For example, the following statement prints all the powers of two between 1 and 100: for (i = 1; i <= 100; i *= 2) - print i + print i If there is nothing to be done, any of the three expressions in the parentheses following the `for' keyword may be omitted. Thus, @@ -9842,11 +9876,11 @@ rules. *Note BEGINFILE/ENDFILE::. According to the POSIX standard, the behavior is undefined if the `next' statement is used in a `BEGIN' or `END' rule. `gawk' treats it -as a syntax error. Although POSIX permits it, most other `awk' -implementations don't allow the `next' statement inside function bodies -(*note User-defined::). Just as with any other `next' statement, a -`next' statement inside a function body reads the next record and -starts processing it with the first rule in the program. +as a syntax error. Although POSIX does not disallow it, most other +`awk' implementations don't allow the `next' statement inside function +bodies (*note User-defined::). Just as with any other `next' +statement, a `next' statement inside a function body reads the next +record and starts processing it with the first rule in the program. File: gawk.info, Node: Nextfile Statement, Next: Exit Statement, Prev: Next Statement, Up: Statements @@ -9890,17 +9924,17 @@ files, pipes, and coprocesses that are opened with redirections. It is not related to the main processing that `awk' does with the files listed in `ARGV'. - NOTE: For many years, `nextfile' was a `gawk' extension. As of + NOTE: For many years, `nextfile' was a common extension. In September, 2012, it was accepted for inclusion into the POSIX standard. See the Austin Group website (http://austingroupbugs.net/view.php?id=607). - The current version of BWK `awk', and `mawk' (*note Other -Versions::) also support `nextfile'. However, they don't allow the -`nextfile' statement inside function bodies (*note User-defined::). -`gawk' does; a `nextfile' inside a function body reads the next record -and starts processing it with the first rule in the program, just as -any other `nextfile' statement. + The current version of BWK `awk', and `mawk' also support +`nextfile'. However, they don't allow the `nextfile' statement inside +function bodies (*note User-defined::). `gawk' does; a `nextfile' +inside a function body reads the next record and starts processing it +with the first rule in the program, just as any other `nextfile' +statement. File: gawk.info, Node: Exit Statement, Prev: Nextfile Statement, Up: Statements @@ -9924,8 +9958,8 @@ stop immediately. An `exit' statement that is not part of a `BEGIN' or `END' rule stops the execution of any further automatic rules for the current record, skips reading any remaining input records, and executes the -`END' rule if there is one. Any `ENDFILE' rules are also skipped; they -are not executed. +`END' rule if there is one. `gawk' also skips any `ENDFILE' rules; +they do not execute. In such a case, if you don't want the `END' rule to do its job, set a variable to nonzero before the `exit' statement and check that @@ -10012,7 +10046,7 @@ description of each variable.) use binary I/O. Any other string value is treated the same as `"rw"', but causes `gawk' to generate a warning message. `BINMODE' is described in more detail in *note PC Using::. `mawk' - *note Other Versions::), also supports this variable, but only + (*note Other Versions::), also supports this variable, but only using numeric values. ``CONVFMT'' @@ -10095,9 +10129,8 @@ description of each variable.) printing with the `print' statement. It works by being passed as the first argument to the `sprintf()' function (*note String Functions::). Its default value is `"%.6g"'. Earlier versions of - `awk' also used `OFMT' to specify the format for converting - numbers to strings in general expressions; this is now done by - `CONVFMT'. + `awk' used `OFMT' to specify the format for converting numbers to + strings in general expressions; this is now done by `CONVFMT'. `OFS' This is the output field separator (*note Output Separators::). @@ -10206,8 +10239,8 @@ Options::), they are not special. the command line. While you can change the value of `ARGIND' within your `awk' - program, `gawk' automatically sets it to a new value when the next - file is opened. + program, `gawk' automatically sets it to a new value when it opens + the next file. `ENVIRON' An associative array containing the values of the environment. @@ -10257,9 +10290,9 @@ Options::), they are not special. Getline::) inside a `BEGIN' rule can give `FILENAME' a value. `FNR' - The current record number in the current file. `FNR' is - incremented each time a new record is read (*note Records::). It - is reinitialized to zero each time a new input file is started. + The current record number in the current file. `awk' increments + `FNR' each time it reads a new record (*note Records::). `awk' + resets `FNR' to zero each time it starts a new input file. `NF' The number of fields in the current input record. `NF' is set @@ -10283,8 +10316,8 @@ Options::), they are not special. `NR' The number of input records `awk' has processed since the - beginning of the program's execution (*note Records::). `NR' is - incremented each time a new record is read. + beginning of the program's execution (*note Records::). `awk' + increments `NR' each time it reads a new record. `PROCINFO #' The elements of this array provide access to information about the @@ -10349,7 +10382,7 @@ Options::), they are not special. `PROCINFO["sorted_in"]' If this element exists in `PROCINFO', its value controls the - order in which array indices will be processed by `for (INDEX + order in which array indices will be processed by `for (INDX in ARRAY)' loops. Since this is an advanced feature, we defer the full description until later; see *note Scanning an Array::. @@ -10367,7 +10400,7 @@ Options::), they are not special. The following additional elements in the array are available to provide information about the MPFR and GMP libraries if your - version of `gawk' supports arbitrary precision numbers (*note + version of `gawk' supports arbitrary precision arithmetic (*note Arbitrary Precision Arithmetic::): `PROCINFO["mpfr_version"]' @@ -10400,14 +10433,14 @@ Options::), they are not special. The `PROCINFO' array has the following additional uses: - * It may be used to cause coprocesses to communicate over - pseudo-ttys instead of through two-way pipes; this is - discussed further in *note Two-way I/O::. - * It may be used to provide a timeout when reading from any open input file, pipe, or coprocess. *Note Read Timeout::, for more information. + * It may be used to cause coprocesses to communicate over + pseudo-ttys instead of through two-way pipes; this is + discussed further in *note Two-way I/O::. + `RLENGTH' The length of the substring matched by the `match()' function (*note String Functions::). `RLENGTH' is set by invoking the @@ -10596,6 +10629,12 @@ Because `-q' is not a valid `gawk' option, it and the following `-v' are passed on to the `awk' program. (*Note Getopt Function::, for an `awk' library function that parses command-line options.) + When designing your program, you should choose options that don't +conflict with `gawk''s, since it will process any options that it +accepts before passing the rest of the command line on to your program. +Using `#!' with the `-E' option may help (*note Executable Scripts::, +and *note Options::). + File: gawk.info, Node: Pattern Action Summary, Prev: Built-in Variables, Up: Patterns and Actions @@ -10625,8 +10664,8 @@ File: gawk.info, Node: Pattern Action Summary, Prev: Built-in Variables, Up: * The control statements in `awk' are `if'-`else', `while', `for', and `do'-`while'. `gawk' adds the `switch' statement. There are - two flavors of `for' statement: one for for performing general - looping, and the other iterating through an array. + two flavors of `for' statement: one for performing general + looping, and the other for iterating through an array. * `break' and `continue' let you exit early or start the next iteration of a loop (or get out of a `switch'). @@ -10638,12 +10677,16 @@ File: gawk.info, Node: Pattern Action Summary, Prev: Built-in Variables, Up: * The `exit' statement terminates your program. When executed from an action (or function body) it transfers control to the `END' statements. From an `END' statement body, it exits immediately. - You may pass an optional numeric value to be used at `awk''s exit + You may pass an optional numeric value to be used as `awk''s exit status. * Some built-in variables provide control over `awk', mainly for I/O. Other variables convey information from `awk' to your program. + * `ARGC' and `ARGV' make the command-line arguments available to + your program. Manipulating them from a `BEGIN' rule lets you + control how `awk' will process the provided data files. + File: gawk.info, Node: Arrays, Next: Functions, Prev: Patterns and Actions, Up: Top @@ -10663,26 +10706,21 @@ about array usage. The major node moves on to discuss `gawk''s facility for sorting arrays, and ends with a brief description of `gawk''s ability to support true arrays of arrays. - `awk' maintains a single set of names that may be used for naming -variables, arrays, and functions (*note User-defined::). Thus, you -cannot have a variable and an array with the same name in the same -`awk' program. - * Menu: * Array Basics:: The basics of arrays. -* Delete:: The `delete' statement removes an element - from an array. * Numeric Array Subscripts:: How to use numbers as subscripts in `awk'. * Uninitialized Subscripts:: Using Uninitialized variables as subscripts. +* Delete:: The `delete' statement removes an element + from an array. * Multidimensional:: Emulating multidimensional arrays in `awk'. * Arrays of Arrays:: True multidimensional arrays. * Arrays Summary:: Summary of arrays. -File: gawk.info, Node: Array Basics, Next: Delete, Up: Arrays +File: gawk.info, Node: Array Basics, Next: Numeric Array Subscripts, Up: Arrays 8.1 The Basics of Arrays ======================== @@ -10901,14 +10939,14 @@ encountering repeated numbers, gaps, or lines that don't begin with a number: { - if ($1 > max) - max = $1 - arr[$1] = $0 + if ($1 > max) + max = $1 + arr[$1] = $0 } END { - for (x = 1; x <= max; x++) - print arr[x] + for (x = 1; x <= max; x++) + print arr[x] } The first rule keeps track of the largest line number seen so far; @@ -10936,9 +10974,9 @@ overrides the others. Gaps in the line numbers can be handled with an easy improvement to the program's `END' rule, as follows: END { - for (x = 1; x <= max; x++) - if (x in arr) - print arr[x] + for (x = 1; x <= max; x++) + if (x in arr) + print arr[x] } @@ -10956,7 +10994,7 @@ lowest index up to the highest. This technique won't do the job in has a special kind of `for' statement for scanning an array: for (VAR in ARRAY) - BODY + BODY This loop executes BODY once for each index in ARRAY that the program has previously used, with the variable VAR set to that index. @@ -11013,7 +11051,7 @@ all `awk' versions do so. Consider this program, named `loopcheck.awk': } } - Here is what happens when run with `gawk': + Here is what happens when run with `gawk' (and `mawk'): $ gawk -f loopcheck.awk -| here @@ -11116,7 +11154,8 @@ available: to run. Changing `PROCINFO["sorted_in"]' in the loop body does not affect the loop. For example: - $ gawk 'BEGIN { + $ gawk ' + > BEGIN { > a[4] = 4 > a[3] = 3 > for (i in a) @@ -11124,7 +11163,8 @@ affect the loop. For example: > }' -| 4 4 -| 3 3 - $ gawk 'BEGIN { + $ gawk ' + > BEGIN { > PROCINFO["sorted_in"] = "@ind_str_asc" > a[4] = 4 > a[3] = 3 @@ -11176,87 +11216,9 @@ ordering when the numeric values are equal ensures that `gawk' behaves consistently across different environments. -File: gawk.info, Node: Delete, Next: Numeric Array Subscripts, Prev: Array Basics, Up: Arrays - -8.2 The `delete' Statement -========================== +File: gawk.info, Node: Numeric Array Subscripts, Next: Uninitialized Subscripts, Prev: Array Basics, Up: Arrays -To remove an individual element of an array, use the `delete' statement: - - delete ARRAY[INDEX-EXPRESSION] - - Once an array element has been deleted, any value the element once -had is no longer available. It is as if the element had never been -referred to or been given a value. The following is an example of -deleting elements in an array: - - for (i in frequencies) - delete frequencies[i] - -This example removes all the elements from the array `frequencies'. -Once an element is deleted, a subsequent `for' statement to scan the -array does not report that element and the `in' operator to check for -the presence of that element returns zero (i.e., false): - - delete foo[4] - if (4 in foo) - print "This will never be printed" - - It is important to note that deleting an element is _not_ the same -as assigning it a null value (the empty string, `""'). For example: - - foo[4] = "" - if (4 in foo) - print "This is printed, even though foo[4] is empty" - - It is not an error to delete an element that does not exist. -However, if `--lint' is provided on the command line (*note Options::), -`gawk' issues a warning message when an element that is not in the -array is deleted. - - All the elements of an array may be deleted with a single statement -by leaving off the subscript in the `delete' statement, as follows: - - delete ARRAY - - Using this version of the `delete' statement is about three times -more efficient than the equivalent loop that deletes each element one -at a time. - - NOTE: For many years, using `delete' without a subscript was a - `gawk' extension. As of September, 2012, it was accepted for - inclusion into the POSIX standard. See the Austin Group website - (http://austingroupbugs.net/view.php?id=544). This form of the - `delete' statement is also supported by BWK `awk' and `mawk', as - well as by a number of other implementations (*note Other - Versions::). - - The following statement provides a portable but nonobvious way to -clear out an array:(1) - - split("", array) - - The `split()' function (*note String Functions::) clears out the -target array first. This call asks it to split apart the null string. -Because there is no data to split out, the function simply clears the -array and then returns. - - CAUTION: Deleting an array does not change its type; you cannot - delete an array and then use the array's name as a scalar (i.e., a - regular variable). For example, the following does not work: - - a[1] = 3 - delete a - a = 3 - - ---------- Footnotes ---------- - - (1) Thanks to Michael Brennan for pointing this out. - - -File: gawk.info, Node: Numeric Array Subscripts, Next: Uninitialized Subscripts, Prev: Delete, Up: Arrays - -8.3 Using Numbers to Subscript Arrays +8.2 Using Numbers to Subscript Arrays ===================================== An important aspect to remember about arrays is that _array subscripts @@ -11285,9 +11247,9 @@ two significant digits. This test fails, since `"12.15"' is different from `"12.153"'. According to the rules for conversions (*note Conversion::), integer -values are always converted to strings as integers, no matter what the -value of `CONVFMT' may happen to be. So the usual case of the -following works: +values always convert to strings as integers, no matter what the value +of `CONVFMT' may happen to be. So the usual case of the following +works: for (i = 1; i <= maxsub; i++) do something with array[i] @@ -11300,14 +11262,14 @@ example, that `array[17]', `array[021]', and `array[0x11]' all refer to the same element! As with many things in `awk', the majority of the time things work -as one would expect them to. But it is useful to have a precise +as you would expect them to. But it is useful to have a precise knowledge of the actual rules since they can sometimes have a subtle effect on your programs. -File: gawk.info, Node: Uninitialized Subscripts, Next: Multidimensional, Prev: Numeric Array Subscripts, Up: Arrays +File: gawk.info, Node: Uninitialized Subscripts, Next: Delete, Prev: Numeric Array Subscripts, Up: Arrays -8.4 Using Uninitialized Variables as Subscripts +8.3 Using Uninitialized Variables as Subscripts =============================================== Suppose it's necessary to write a program to print the input data in @@ -11353,7 +11315,86 @@ string as a subscript if `--lint' is provided on the command line (*note Options::). -File: gawk.info, Node: Multidimensional, Next: Arrays of Arrays, Prev: Uninitialized Subscripts, Up: Arrays +File: gawk.info, Node: Delete, Next: Multidimensional, Prev: Uninitialized Subscripts, Up: Arrays + +8.4 The `delete' Statement +========================== + +To remove an individual element of an array, use the `delete' statement: + + delete ARRAY[INDEX-EXPRESSION] + + Once an array element has been deleted, any value the element once +had is no longer available. It is as if the element had never been +referred to or been given a value. The following is an example of +deleting elements in an array: + + for (i in frequencies) + delete frequencies[i] + +This example removes all the elements from the array `frequencies'. +Once an element is deleted, a subsequent `for' statement to scan the +array does not report that element and the `in' operator to check for +the presence of that element returns zero (i.e., false): + + delete foo[4] + if (4 in foo) + print "This will never be printed" + + It is important to note that deleting an element is _not_ the same +as assigning it a null value (the empty string, `""'). For example: + + foo[4] = "" + if (4 in foo) + print "This is printed, even though foo[4] is empty" + + It is not an error to delete an element that does not exist. +However, if `--lint' is provided on the command line (*note Options::), +`gawk' issues a warning message when an element that is not in the +array is deleted. + + All the elements of an array may be deleted with a single statement +by leaving off the subscript in the `delete' statement, as follows: + + delete ARRAY + + Using this version of the `delete' statement is about three times +more efficient than the equivalent loop that deletes each element one +at a time. + + This form of the `delete' statement is also supported by BWK `awk' +and `mawk', as well as by a number of other implementations. + + NOTE: For many years, using `delete' without a subscript was a + common extension. In September, 2012, it was accepted for + inclusion into the POSIX standard. See the Austin Group website + (http://austingroupbugs.net/view.php?id=544). + + The following statement provides a portable but nonobvious way to +clear out an array:(1) + + split("", array) + + The `split()' function (*note String Functions::) clears out the +target array first. This call asks it to split apart the null string. +Because there is no data to split out, the function simply clears the +array and then returns. + + CAUTION: Deleting all the elements from an array does not change + its type; you cannot clear an array and then use the array's name + as a scalar (i.e., a regular variable). For example, the following + does not work: + + a[1] = 3 + delete a + a = 3 + + ---------- Footnotes ---------- + + (1) Thanks to Michael Brennan for pointing this out. + + +File: gawk.info, Node: Multidimensional, Next: Arrays of Arrays, Prev: Delete, Up: Arrays 8.5 Multidimensional Arrays =========================== @@ -11365,7 +11406,7 @@ File: gawk.info, Node: Multidimensional, Next: Arrays of Arrays, Prev: Uninit A multidimensional array is an array in which an element is identified by a sequence of indices instead of a single index. For example, a two-dimensional array requires two indices. The usual way -(in most languages, including `awk') to refer to an element of a +(in many languages, including `awk') to refer to an element of a two-dimensional array named `grid' is with `grid[X,Y]'. Multidimensional arrays are supported in `awk' through concatenation @@ -11506,8 +11547,9 @@ multidimensional subscript). So the following is valid in `gawk': Each subarray and the main array can be of different length. In fact, the elements of an array or its subarray do not all have to have the same type. This means that the main array and any of its subarrays -can be non-rectangular, or jagged in structure. One can assign a scalar -value to the index `4' of the main array `a': +can be non-rectangular, or jagged in structure. You can assign a scalar +value to the index `4' of the main array `a', even though `a[1]' is +itself an array and not a scalar: a[4] = "An element in a jagged array" @@ -11568,6 +11610,8 @@ an array element is itself an array: print array[i][j] } } + else + print array[i] } If the structure of a jagged array of arrays is known in advance, @@ -11798,8 +11842,9 @@ brackets ([ ]): user-defined function that can be used to obtain a random non-negative integer less than N: - function randint(n) { - return int(n * rand()) + function randint(n) + { + return int(n * rand()) } The multiplication produces a random number greater than zero and @@ -11816,8 +11861,7 @@ brackets ([ ]): # Roll 3 six-sided dice and # print total number of points. { - printf("%d points\n", - roll(6)+roll(6)+roll(6)) + printf("%d points\n", roll(6) + roll(6) + roll(6)) } CAUTION: In most `awk' implementations, including `gawk', @@ -11904,8 +11948,7 @@ with character indices, and not byte indices. In the following list, optional parameters are enclosed in square brackets ([ ]). Several functions perform string substitution; the full discussion is provided in the description of the `sub()' function, -which comes towards the end since the list is presented in alphabetic -order. +which comes towards the end since the list is presented alphabetically. Those functions that are specific to `gawk' are marked with a pound sign (`#'). They are not available in compatibility mode (*note @@ -11938,7 +11981,8 @@ Options::): When comparing strings, `IGNORECASE' affects the sorting (*note Array Sorting Functions::). If the SOURCE array contains subarrays as values (*note Arrays of Arrays::), they will come - last, after all scalar values. + last, after all scalar values. Subarrays are _not_ recursively + sorted. For example, if the contents of `a' are as follows: @@ -12041,7 +12085,10 @@ Options::): If FIND is not found, `index()' returns zero. - It is a fatal error to use a regexp constant for FIND. + With BWK `awk' and `gawk', it is a fatal error to use a regexp + constant for FIND. Other implementations allow it, simply + treating the regexp constant as an expression meaning `$0 ~ + /regexp/'. `length('[STRING]`)' Return the number of characters in STRING. If STRING is a number, @@ -12109,13 +12156,12 @@ Options::): For example: { - if ($1 == "FIND") - regex = $2 - else { - where = match($0, regex) - if (where != 0) - print "Match of", regex, "found at", - where, "in", $0 + if ($1 == "FIND") + regex = $2 + else { + where = match($0, regex) + if (where != 0) + print "Match of", regex, "found at", where, "in", $0 } } @@ -12184,7 +12230,7 @@ Options::): The `patsplit()' function splits strings into pieces in a manner similar to the way input lines are split into fields using `FPAT' - (*note Splitting By Content::. + (*note Splitting By Content::). Before splitting the string, `patsplit()' deletes any previously existing elements in the arrays ARRAY and SEPS. @@ -12195,15 +12241,14 @@ Options::): first piece is stored in `ARRAY[1]', the second piece in `ARRAY[2]', and so forth. The string value of the third argument, FIELDSEP, is a regexp describing where to split STRING (much as - `FS' can be a regexp describing where to split input records; - *note Regexp Field Splitting::). If FIELDSEP is omitted, the - value of `FS' is used. `split()' returns the number of elements - created. SEPS is a `gawk' extension with `SEPS[I]' being the - separator string between `ARRAY[I]' and `ARRAY[I+1]'. If FIELDSEP - is a single space then any leading whitespace goes into `SEPS[0]' - and any trailing whitespace goes into `SEPS[N]' where N is the - return value of `split()' (that is, the number of elements in - ARRAY). + `FS' can be a regexp describing where to split input records). If + FIELDSEP is omitted, the value of `FS' is used. `split()' returns + the number of elements created. SEPS is a `gawk' extension with + `SEPS[I]' being the separator string between `ARRAY[I]' and + `ARRAY[I+1]'. If FIELDSEP is a single space then any leading + whitespace goes into `SEPS[0]' and any trailing whitespace goes + into `SEPS[N]' where N is the return value of `split()' (that is, + the number of elements in ARRAY). The `split()' function splits strings into pieces in a manner similar to the way input lines are split into fields. For example: @@ -12409,6 +12454,17 @@ Options::): Nonalphabetic characters are left unchanged. For example, `toupper("MiXeD cAsE 123")' returns `"MIXED CASE 123"'. + Matching the Null String + + In `awk', the `*' operator can match the null string. This is +particularly important for the `sub()', `gsub()', and `gensub()' +functions. For example: + + $ echo abc | awk '{ gsub(/m*/, "X"); print }' + -| XaXbXcX + +Although this makes a certain amount of sense, it can be surprising. + ---------- Footnotes ---------- (1) Unless you use the `--non-decimal-data' option, which isn't @@ -12428,8 +12484,8 @@ File: gawk.info, Node: Gory Details, Up: String Functions 9.1.3.1 More About `\' and `&' with `sub()', `gsub()', and `gensub()' ..................................................................... - CAUTION: This section has been known to cause headaches. You - might want to skip it upon first reading. + CAUTION: This subsubsection has been reported to cause headaches. + You might want to skip it upon first reading. When using `sub()', `gsub()', or `gensub()', and trying to get literal backslashes and ampersands into the replacement text, you need @@ -12563,17 +12619,6 @@ Table 9.4: Escape Sequence Processing For `gensub()' and the special cases for `sub()' and `gsub()', we recommend the use of `gawk' and `gensub()' when you have to do substitutions. - Matching the Null String - - In `awk', the `*' operator can match the null string. This is -particularly important for the `sub()', `gsub()', and `gensub()' -functions. For example: - - $ echo abc | awk '{ gsub(/m*/, "X"); print }' - -| XaXbXcX - -Although this makes a certain amount of sense, it can be surprising. - ---------- Footnotes ---------- (1) This was rather naive of him, despite there being a note in this @@ -12623,11 +12668,10 @@ parameters are enclosed in square brackets ([ ]): function--`gawk' also buffers its output and the `fflush()' function forces `gawk' to flush its buffers. - `fflush()' was added to BWK `awk' in April of 1992. For two - decades, it was not part of the POSIX standard. As of December, - 2012, it was accepted for inclusion into the POSIX standard. See - the Austin Group website - (http://austingroupbugs.net/view.php?id=634). + Brian Kernighan added `fflush()' to his `awk' in April of 1992. + For two decades, it was a common extension. In December, 2012, it + was accepted for inclusion into the POSIX standard. See the + Austin Group website (http://austingroupbugs.net/view.php?id=634). POSIX standardizes `fflush()' as follows: If there is no argument, or if the argument is the null string (`""'), then `awk' flushes @@ -12814,7 +12858,7 @@ enclosed in square brackets ([ ]): If DATESPEC does not contain enough elements or if the resulting time is out of range, `mktime()' returns -1. -`strftime(' [FORMAT [`,' TIMESTAMP [`,' UTC-FLAG] ] ]`)' +`strftime('[FORMAT [`,' TIMESTAMP [`,' UTC-FLAG] ] ]`)' Format the time specified by TIMESTAMP based on the contents of the FORMAT string and return the result. It is similar to the function of the same name in ISO C. If UTC-FLAG is present and is @@ -13029,7 +13073,7 @@ to the standard output and interprets the current time according to the format specifiers in the string. For example: $ date '+Today is %A, %B %d, %Y.' - -| Today is Monday, May 05, 2014. + -| Today is Monday, September 22, 2014. Here is the `gawk' version of the `date' utility. It has a shell "wrapper" to handle the `-u' option, which requires that `date' run as @@ -13118,12 +13162,13 @@ a given value. Finally, two other common operations are to shift the bits left or right. For example, if you have a bit string `10111001' and you shift -it right by three bits, you end up with `00010111'.(1) If you start over -again with `10111001' and shift it left by three bits, you end up with -`11001000'. `gawk' provides built-in functions that implement the -bitwise operations just described. They are: +it right by three bits, you end up with `00010111'.(1) If you start +over again with `10111001' and shift it left by three bits, you end up +with `11001000'. The following list describes `gawk''s built-in +functions that implement the bitwise operations. Optional parameters +are enclosed in square brackets ([ ]): -``and(V1, V2' [`,' ...]`)'' +``and('V1`,' V2 [`,' ...]`)'' Return the bitwise AND of the arguments. There must be at least two. @@ -13133,13 +13178,13 @@ bitwise operations just described. They are: ``lshift(VAL, COUNT)'' Return the value of VAL, shifted left by COUNT bits. -``or(V1, V2' [`,' ...]`)'' +``or('V1`,' V2 [`,' ...]`)'' Return the bitwise OR of the arguments. There must be at least two. ``rshift(VAL, COUNT)'' Return the value of VAL, shifted right by COUNT bits. -``xor(V1, V2' [`,' ...]`)'' +``xor('V1`,' V2 [`,' ...]`)'' Return the bitwise XOR of the arguments. There must be at least two. @@ -13214,7 +13259,7 @@ Nondecimal-numbers::), and then demonstrates the results of the (1) This example shows that 0's come in on the left side. For `gawk', this is always true, but in some languages, it's possible to -have the left side fill with 1's. Caveat emptor. +have the left side fill with 1's. File: gawk.info, Node: Type Functions, Next: I18N Functions, Prev: Bitwise Functions, Up: Built-in @@ -13224,7 +13269,7 @@ File: gawk.info, Node: Type Functions, Next: I18N Functions, Prev: Bitwise Fu `gawk' provides a single function that lets you distinguish an array from a scalar variable. This is necessary for writing code that -traverses every element of an array of arrays. (*note Arrays of +traverses every element of an array of arrays (*note Arrays of Arrays::). `isarray(X)' @@ -13236,12 +13281,12 @@ itself an array or not. The second is inside the body of a user-defined function (not discussed yet; *note User-defined::), to test if a parameter is an array or not. - Note, however, that using `isarray()' at the global level to test -variables makes no sense. Since you are the one writing the program, you -are supposed to know if your variables are arrays or not. And in fact, -due to the way `gawk' works, if you pass the name of a variable that -has not been previously used to `isarray()', `gawk' will end up turning -it into a scalar. + NOTE: Using `isarray()' at the global level to test variables + makes no sense. Since you are the one writing the program, you are + supposed to know if your variables are arrays or not. And in fact, + due to the way `gawk' works, if you pass the name of a variable + that has not been previously used to `isarray()', `gawk' ends up + turning it into a scalar. File: gawk.info, Node: I18N Functions, Prev: Type Functions, Up: Built-in @@ -13452,7 +13497,7 @@ extra whitespace signifies the start of the local variable list): function delarray(a, i) { for (i in a) - delete a[i] + delete a[i] } When working with arrays, it is often necessary to delete all the @@ -13460,8 +13505,8 @@ elements in an array and start over with a new list of elements (*note Delete::). Instead of having to repeat this loop everywhere that you need to clear out an array, your program can just call `delarray'. (This guarantees portability. The use of `delete ARRAY' to delete the -contents of an entire array is a recent(1) addition to the POSIX -standard.) +contents of an entire array is a relatively recent(1) addition to the +POSIX standard.) The following is an example of a recursive function. It takes a string as an input parameter and returns the string in backwards order. @@ -13484,7 +13529,7 @@ way: > gawk -e '{ print rev($0) }' -f rev.awk -| !cinaP t'noD - The C `ctime()' function takes a timestamp and returns it in a + The C `ctime()' function takes a timestamp and returns it as a string, formatted in a well-known fashion. The following example uses the built-in `strftime()' function (*note Time Functions::) to create an `awk' version of `ctime()': @@ -13495,12 +13540,18 @@ an `awk' version of `ctime()': function ctime(ts, format) { - format = PROCINFO["strftime"] + format = "%a %b %e %H:%M:%S %Z %Y" + if (ts == 0) ts = systime() # use current time as default return strftime(format, ts) } + You might think that `ctime()' could use `PROCINFO["strftime"]' for +its format string. That would be a mistake, since `ctime()' is supposed +to return the time formatted in a standard fashion, and user-level code +could have changed `PROCINFO["strftime"]'. + ---------- Footnotes ---------- (1) Late in 2012. @@ -14042,7 +14093,7 @@ mechanism allows you to sort arbitrary data in an arbitrary fashion. # quicksort_swap --- helper function for quicksort, should really be inline - function quicksort_swap(data, i, j, temp) + function quicksort_swap(data, i, j, temp) { temp = data[i] data[i] = data[j] @@ -14177,11 +14228,12 @@ File: gawk.info, Node: Functions Summary, Prev: Indirect Calls, Up: Functions functions. * POSIX `awk' provides three kinds of built-in functions: numeric, - string, and I/O. `gawk' provides functions that work with values - representing time, do bit manipulation, sort arrays, and - internationalize and localize programs. `gawk' also provides - several extensions to some of standard functions, typically in the - form of additional arguments. + string, and I/O. `gawk' provides functions that sort arrays, work + with values representing time, do bit manipulation, determine + variable type (array vs. scalar), and internationalize and + localize programs. `gawk' also provides several extensions to + some of standard functions, typically in the form of additional + arguments. * Functions accept zero or more arguments and return a value. The expressions that provide the argument values are completely @@ -14366,8 +14418,9 @@ program, leading to bugs that are very difficult to track down: function lib_func(x, y, l1, l2) { ... - USE VARIABLE some_var # some_var should be local - ... # but is not by oversight + # some_var should be local but by oversight is not + USE VARIABLE some_var + ... } A different convention, common in the Tcl community, is to use a @@ -14475,7 +14528,7 @@ versions of `awk': # a[5] = "123.45" # a[6] = "1.e3" # a[7] = "1.32" - # a[7] = "1.32E2" + # a[8] = "1.32E2" # # for (i = 1; i in a; i++) # print a[i], strtonum(a[i]), mystrtonum(a[i]) @@ -14484,9 +14537,11 @@ versions of `awk': The function first looks for C-style octal numbers (base 8). If the input string matches a regular expression describing octal numbers, then `mystrtonum()' loops through each character in the string. It -sets `k' to the index in `"01234567"' of the current octal digit. -Since the return value is one-based, the `k--' adjusts `k' so it can be -used in computing the return value. +sets `k' to the index in `"1234567"' of the current octal digit. The +return value will either be the same number as the digit, or zero if +the character is not there, which will be true for a `0'. This is +safe, since the regexp test in the `if' ensures that only octal values +are converted. Similar logic applies to the code that checks for and converts a hexadecimal value, which starts with `0x' or `0X'. The use of @@ -14512,7 +14567,7 @@ condition or set of conditions is true. Before proceeding with a particular computation, you make a statement about what you believe to be the case. Such a statement is known as an "assertion". The C language provides an `<assert.h>' header file and corresponding -`assert()' macro that the programmer can use to make assertions. If an +`assert()' macro that a programmer can use to make assertions. If an assertion fails, the `assert()' macro arranges to print a diagnostic message describing the condition that should have been true but was not, and then it kills the program. In C, using `assert()' looks this: @@ -14852,7 +14907,7 @@ current time formatted in the same way as the `date' utility: now = systime() # return date(1)-style output - ret = strftime(PROCINFO["strftime"], now) + ret = strftime("%a %b %e %H:%M:%S %Z %Y", now) # clear out target array delete time @@ -14948,6 +15003,9 @@ string. Thus calling code may use something like: This tests the result to see if it is empty or not. An equivalent test would be `contents == ""'. + *Note Extension Sample Readfile::, for an extension function that +also reads an entire file into memory. + File: gawk.info, Node: Data File Management, Next: Getopt Function, Prev: General Functions, Up: Library Functions @@ -14997,15 +15055,14 @@ does so _portably_; this works with any implementation of `awk': # that each take the name of the file being started or # finished, respectively. - FILENAME != _oldfilename \ - { + FILENAME != _oldfilename { if (_oldfilename != "") endfile(_oldfilename) _oldfilename = FILENAME beginfile(FILENAME) } - END { endfile(FILENAME) } + END { endfile(FILENAME) } This file must be loaded before the user's "main" program, so that the rule it supplies is executed first. @@ -15043,7 +15100,7 @@ solves the problem: beginfile(FILENAME) } - END { endfile(_filename_) } + END { endfile(_filename_) } *note Wc Program::, shows how this library function can be used and how it simplifies writing the main program. @@ -15096,15 +15153,12 @@ over with it from the top. For lack of a better name, we'll call it nextfile } - This code relies on the `ARGIND' variable (*note Auto-set::), which -is specific to `gawk'. If you are not using `gawk', you can use ideas -presented in *note Filetrans Function::, to either update `ARGIND' on -your own or modify this code as appropriate. - - The `rewind()' function also relies on the `nextfile' keyword (*note -Nextfile Statement::). Because of this, you should not call it from an -`ENDFILE' rule. (This isn't necessary anyway, since as soon as an -`ENDFILE' rule finishes `gawk' goes to the next file!) + The `rewind()' function relies on the `ARGIND' variable (*note +Auto-set::), which is specific to `gawk'. It also relies on the +`nextfile' keyword (*note Nextfile Statement::). Because of this, you +should not call it from an `ENDFILE' rule. (This isn't necessary +anyway, since as soon as an `ENDFILE' rule finishes `gawk' goes to the +next file!) File: gawk.info, Node: File Checking, Next: Empty Files, Prev: Rewind Function, Up: Data File Management @@ -15121,7 +15175,7 @@ following program to your `awk' program: BEGIN { for (i = 1; i < ARGC; i++) { - if (ARGV[i] ~ /^[[:alpha:]_][[:alnum:]_]*=.*/ \ + if (ARGV[i] ~ /^[a-zA-Z_][a-zA-Z0-9_]*=.*/ \ || ARGV[i] == "-" || ARGV[i] == "/dev/stdin") continue # assignment or standard input else if ((getline junk < ARGV[i]) < 0) # unreadable @@ -15135,6 +15189,10 @@ following program to your `awk' program: element from `ARGV' with `delete' skips the file (since it's no longer in the list). See also *note ARGC and ARGV::. + The regular expression check purposely does not use character classes +such as `[:alpha:]' and `[:alnum:]' (*note Bracket Expressions::) since +`awk' variable names only allow the English letters. + ---------- Footnotes ---------- (1) The `BEGINFILE' special pattern (*note BEGINFILE/ENDFILE::) @@ -15213,7 +15271,7 @@ programming with a library file does the trick: function disable_assigns(argc, argv, i) { for (i = 1; i < argc; i++) - if (argv[i] ~ /^[[:alpha:]_][[:alnum:]_]*=.*/) + if (argv[i] ~ /^[a-zA-Z_][a-zA-Z0-9_]*=.*/) argv[i] = ("./" argv[i]) } @@ -15513,10 +15571,14 @@ result of two sample runs of the test program: In both runs, the first `--' terminates the arguments to `awk', so that it does not try to interpret the `-a', etc., as its own options. - NOTE: After `getopt()' is through, it is the responsibility of the - user level code to clear out all the elements of `ARGV' from 1 to - `Optind', so that `awk' does not try to process the command-line - options as file names. + NOTE: After `getopt()' is through, user level code must clear out + all the elements of `ARGV' from 1 to `Optind', so that `awk' does + not try to process the command-line options as file names. + + Using `#!' with the `-E' option may help avoid conflicts between +your program's options and `gawk''s options, since `-E' causes `gawk' +to abandon processing of further options (*note Executable Scripts::, +and *note Options::). Several of the sample programs presented in *note Sample Programs::, use `getopt()' to process their arguments. @@ -15675,8 +15737,8 @@ corresponding to the C functions of the same names: routine, we have chosen to put it in `/usr/local/libexec/awk'; however, you might want it to be in a different directory on your system. - The function `_pw_init()' keeps three copies of the user information -in three associative arrays. The arrays are indexed by username + The function `_pw_init()' fills three copies of the user information +into three associative arrays. The arrays are indexed by username (`_pw_byname'), by user ID number (`_pw_byuid'), and by order of occurrence (`_pw_bycount'). The variable `_pw_inited' is used for efficiency, since `_pw_init()' needs to be called only once. @@ -15686,13 +15748,10 @@ efficiency, since `_pw_init()' needs to be called only once. in the variable `using_fw' whether field splitting with `FIELDWIDTHS' is in effect or not. Doing so is necessary, since these functions could be called from anywhere within a user's program, and the user may -have his or her own way of splitting records and fields. - - The `using_fw' variable checks `PROCINFO["FS"]', which is -`"FIELDWIDTHS"' if field splitting is being done with `FIELDWIDTHS'. -This makes it possible to restore the correct field-splitting mechanism -later. The test can only be true for `gawk'. It is false if using -`FS' or `FPAT', or on some other `awk' implementation. +have his or her own way of splitting records and fields. This makes it +possible to restore the correct field-splitting mechanism later. The +test can only be true for `gawk'. It is false if using `FS' or `FPAT', +or on some other `awk' implementation. The code that checks for using `FPAT', using `using_fpat' and `PROCINFO["FS"]', is similar. @@ -15888,8 +15947,7 @@ the same names: n = split($4, a, "[ \t]*,[ \t]*") for (i = 1; i <= n; i++) if (a[i] in _gr_groupsbyuser) - _gr_groupsbyuser[a[i]] = \ - _gr_groupsbyuser[a[i]] " " $1 + _gr_groupsbyuser[a[i]] = gr_groupsbyuser[a[i]] " " $1 else _gr_groupsbyuser[a[i]] = $1 @@ -16065,8 +16123,8 @@ File: gawk.info, Node: Library Functions Summary, Next: Library Exercises, Pr ============ * Reading programs is an excellent way to learn Good Programming. - The functions provided in this major node and the next are intended - to serve that purpose. + The functions and programs provided in this major node and the next + are intended to serve that purpose. * When writing general-purpose library functions, put some thought into how to name any global variables so that they won't conflict @@ -16257,18 +16315,13 @@ supplied: # # Requires getopt() and join() library functions - function usage( e1, e2) + function usage() { - e1 = "usage: cut [-f list] [-d c] [-s] [files...]" - e2 = "usage: cut [-c list] [files...]" - print e1 > "/dev/stderr" - print e2 > "/dev/stderr" + print("usage: cut [-f list] [-d c] [-s] [files...]") > "/dev/stderr" + print("usage: cut [-c list] [files...]") > "/dev/stderr" exit 1 } -The variables `e1' and `e2' are used so that the function fits nicely -on the screen. - Next comes a `BEGIN' rule that parses the command-line options. It sets `FS' to a single TAB character, because that is `cut''s default field separator. The rule then sets the output field separator to be the @@ -16670,17 +16723,13 @@ there are no matches, the exit status is one; otherwise it is zero: The `usage()' function prints a usage message in case of invalid options, and then exits: - function usage( e) + function usage() { - e = "Usage: egrep [-csvil] [-e pat] [files ...]" - e = e "\n\tegrep [-csvil] pat [files ...]" - print e > "/dev/stderr" + print("Usage: egrep [-csvil] [-e pat] [files ...]") > "/dev/stderr" + print("\n\tegrep [-csvil] pat [files ...]") > "/dev/stderr" exit 1 } - The variable `e' is used so that the function fits nicely on the -printed page. - ---------- Footnotes ---------- (1) It also introduces a subtle bug; if a match happens, we output @@ -16731,26 +16780,22 @@ and the group numbers: printf("uid=%d", uid) pw = getpwuid(uid) - if (pw != "") - pr_first_field(pw) + pr_first_field(pw) if (euid != uid) { printf(" euid=%d", euid) pw = getpwuid(euid) - if (pw != "") - pr_first_field(pw) + pr_first_field(pw) } printf(" gid=%d", gid) pw = getgrgid(gid) - if (pw != "") - pr_first_field(pw) + pr_first_field(pw) if (egid != gid) { printf(" egid=%d", egid) pw = getgrgid(egid) - if (pw != "") - pr_first_field(pw) + pr_first_field(pw) } for (i = 1; ("group" i) in PROCINFO; i++) { @@ -16759,8 +16804,7 @@ and the group numbers: group = PROCINFO["group" i] printf("%d", group) pw = getgrgid(group) - if (pw != "") - pr_first_field(pw) + pr_first_field(pw) if (("group" (i+1)) in PROCINFO) printf(",") } @@ -16770,8 +16814,10 @@ and the group numbers: function pr_first_field(str, a) { - split(str, a, ":") - printf("(%s)", a[1]) + if (str != "") { + split(str, a, ":") + printf("(%s)", a[1]) + } } The test in the `for' loop is worth noting. Any supplementary @@ -16789,8 +16835,9 @@ then the condition is false the first time it's tested, and the loop body never executes. The `pr_first_field()' function simply isolates out some code that -is used repeatedly, making the whole program slightly shorter and -cleaner. +is used repeatedly, making the whole program shorter and cleaner. In +particular, moving the check for the empty string into this function +saves several lines of code. File: gawk.info, Node: Split Program, Next: Tee Program, Prev: Id Program, Up: Clones @@ -16881,15 +16928,12 @@ moves to the next letter in the alphabet and `s2' starts over again at The `usage()' function simply prints an error message and exits: - function usage( e) + function usage() { - e = "usage: split [-num] [file] [outname]" - print e > "/dev/stderr" + print("usage: split [-num] [file] [outname]") > "/dev/stderr" exit 1 } -The variable `e' is used so that the function fits nicely on the screen. - This program is a bit sloppy; it relies on `awk' to automatically close the last file instead of doing it in an `END' rule. It also assumes that letters are contiguous in the character set, which isn't @@ -17002,10 +17046,10 @@ usage is as follows: The options for `uniq' are: `-d' - Print only repeated lines. + Print only repeated (duplicated) lines. `-u' - Print only nonrepeated lines. + Print only nonrepeated (unique) lines. `-c' Count lines. This option overrides `-d' and `-u'. Both repeated @@ -17055,10 +17099,9 @@ standard output, `/dev/stdout': # # Requires getopt() and join() library functions - function usage( e) + function usage() { - e = "Usage: uniq [-udc [-n]] [+n] [ in [ out ]]" - print e > "/dev/stderr" + print("Usage: uniq [-udc [-n]] [+n] [ in [ out ]]") > "/dev/stderr" exit 1 } @@ -17112,16 +17155,18 @@ standard output, `/dev/stdout': The following function, `are_equal()', compares the current line, `$0', to the previous line, `last'. It handles skipping fields and characters. If no field count and no character count are specified, -`are_equal()' simply returns one or zero depending upon the result of a -simple string comparison of `last' and `$0'. Otherwise, things get more -complicated. If fields have to be skipped, each line is broken into an -array using `split()' (*note String Functions::); the desired fields -are then joined back into a line using `join()'. The joined lines are -stored in `clast' and `cline'. If no fields are skipped, `clast' and -`cline' are set to `last' and `$0', respectively. Finally, if -characters are skipped, `substr()' is used to strip off the leading -`charcount' characters in `clast' and `cline'. The two strings are -then compared and `are_equal()' returns the result: +`are_equal()' returns one or zero depending upon the result of a simple +string comparison of `last' and `$0'. + + Otherwise, things get more complicated. If fields have to be +skipped, each line is broken into an array using `split()' (*note +String Functions::); the desired fields are then joined back into a line +using `join()'. The joined lines are stored in `clast' and `cline'. +If no fields are skipped, `clast' and `cline' are set to `last' and +`$0', respectively. Finally, if characters are skipped, `substr()' is +used to strip off the leading `charcount' characters in `clast' and +`cline'. The two strings are then compared and `are_equal()' returns +the result: function are_equal( n, m, clast, cline, alast, aline) { @@ -17217,8 +17262,8 @@ one or more input files. Its usage is as follows: If no files are specified on the command line, `wc' reads its standard input. If there are multiple files, it also prints total -counts for all the files. The options and their meanings are shown in -the following list: +counts for all the files. The options and their meanings are as +follows: `-l' Count only lines. @@ -17709,12 +17754,12 @@ splits records at blank lines (*note Records::). It sets `MAXLINES' to Most of the work is done in the `printpage()' function. The label lines are stored sequentially in the `line' array. But they have to print horizontally; `line[1]' next to `line[6]', `line[2]' next to -`line[7]', and so on. Two loops are used to accomplish this. The -outer loop, controlled by `i', steps through every 10 lines of data; -this is each row of labels. The inner loop, controlled by `j', goes -through the lines within the row. As `j' goes from 0 to 4, `i+j' is -the `j'-th line in the row, and `i+j+5' is the entry next to it. The -output ends up looking something like this: +`line[7]', and so on. Two loops accomplish this. The outer loop, +controlled by `i', steps through every 10 lines of data; this is each +row of labels. The inner loop, controlled by `j', goes through the +lines within the row. As `j' goes from 0 to 4, `i+j' is the `j'-th +line in the row, and `i+j+5' is the entry next to it. The output ends +up looking something like this: line 1 line 6 line 2 line 7 @@ -17805,7 +17850,7 @@ a useful format. At first glance, a program like this would seem to do the job: - # Print list of word frequencies + # wordfreq-first-try.awk --- print list of word frequencies { for (i = 1; i <= NF; i++) @@ -17959,9 +18004,9 @@ Texinfo input file into separate files. This Info file is written in Texinfo (http://www.gnu.org/software/texinfo/), the GNU project's document formatting language. A single Texinfo source file can be used to -produce both printed and online documentation. The Texinfo language is -described fully, starting with *note (Texinfo)Top:: -texinfo,Texinfo--The GNU Documentation Format. +produce both printed documentation, with TeX, and online documentation. +(The Texinfo language is described fully, starting with *note +(Texinfo)Top:: texinfo,Texinfo--The GNU Documentation Format.) For our purposes, it is enough to know three things about Texinfo input files: @@ -18023,13 +18068,11 @@ upper- and lowercase letters in the directives won't matter. given (`NF' is at least three) and also checking that the command exits with a zero exit status, signifying OK: - # extract.awk --- extract files and run programs - # from texinfo files + # extract.awk --- extract files and run programs from texinfo files BEGIN { IGNORECASE = 1 } - /^@c(omment)?[ \t]+system/ \ - { + /^@c(omment)?[ \t]+system/ { if (NF < 3) { e = ("extract: " FILENAME ":" FNR) e = (e ": badly formed `system' line") @@ -18077,8 +18120,7 @@ with the value of `SUBSEP' (*note Multidimensional::), to rejoin the pieces back into a single line. That line is then printed to the output file: - /^@c(omment)?[ \t]+file/ \ - { + /^@c(omment)?[ \t]+file/ { if (NF != 3) { e = ("extract: " FILENAME ":" FNR ": badly formed `file' line") print e > "/dev/stderr" @@ -18132,7 +18174,7 @@ closing the open file: function unexpected_eof() { printf("extract: %s:%d: unexpected EOF or error\n", - FILENAME, FNR) > "/dev/stderr" + FILENAME, FNR) > "/dev/stderr" exit 1 } @@ -18341,8 +18383,8 @@ arguments are supplied, then the first nonoption argument should be the `awk' program. If there are no command-line arguments left, `igawk' prints an error message and exits. Otherwise, the first argument is appended to `program'. In any case, after the arguments have been -processed, `program' contains the complete text of the original `awk' -program. +processed, the shell variable `program' contains the complete text of +the original `awk' program. The program is as follows: @@ -18588,7 +18630,7 @@ and it is frequently easier to do certain kinds of string and argument manipulation using the shell than it is in `awk'. Finally, `igawk' shows that it is not always necessary to add new -features to a program; they can often be layered on top. +features to a program; they can often be layered on top.(3) ---------- Footnotes ---------- @@ -18597,7 +18639,10 @@ book. We provide some minimal explanations, but see a good shell programming book if you wish to understand things in more depth. (2) On some very old versions of `awk', the test `getline junk < t' -can loop forever if the file exists but is empty. Caveat emptor. +can loop forever if the file exists but is empty. + + (3) `gawk' does `@include' processing itself in order to support the +use of `awk' programs as Web CGI scripts. File: gawk.info, Node: Anagram Program, Next: Signature Program, Prev: Igawk Program, Up: Miscellaneous Programs @@ -18610,12 +18655,11 @@ word list (such as `/usr/share/dict/words' on many GNU/Linux systems). One word is an anagram of another if both words contain the same letters (for example, "babbling" and "blabbing"). - An elegant algorithm is presented in Column 2, Problem C of Jon -Bentley's `Programming Pearls', second edition. The idea is to give -words that are anagrams a common signature, sort all the words together -by their signature, and then print them. Dr. Bentley observes that -taking the letters in each word and sorting them produces that common -signature. + Column 2, Problem C of Jon Bentley's `Programming Pearls', second +edition, presents an elegant algorithm. The idea is to give words that +are anagrams a common signature, sort all the words together by their +signature, and then print them. Dr. Bentley observes that taking the +letters in each word and sorting them produces that common signature. The following program uses arrays of arrays to bring together words with the same signature and array sorting to print the words in sorted @@ -18724,9 +18768,9 @@ File: gawk.info, Node: Programs Summary, Next: Programs Exercises, Prev: Misc 11.4 Summary ============ - * The functions provided in this major node and the previous one - continue on the theme that reading programs is an excellent way to - learn Good Programming. + * The programs provided in this major node continue on the theme + that reading programs is an excellent way to learn Good + Programming. * Using `#!' to make `awk' programs directly runnable makes them easier to use. Otherwise, invoke the program using `awk -f ...'. @@ -18903,11 +18947,10 @@ File: gawk.info, Node: Nondecimal Data, Next: Array Sorting, Up: Advanced Fea =================================== If you run `gawk' with the `--non-decimal-data' option, you can have -nondecimal constants in your input data: +nondecimal values in your input data: $ echo 0123 123 0x123 | - > gawk --non-decimal-data '{ printf "%d, %d, %d\n", - > $1, $2, $3 }' + > gawk --non-decimal-data '{ printf "%d, %d, %d\n", $1, $2, $3 }' -| 83, 123, 291 For this feature to work, write your program so that `gawk' treats @@ -18938,6 +18981,8 @@ request it. programs easier to write and easier to read, and leads to less surprising results. + This option may disappear in a future version of `gawk'. + File: gawk.info, Node: Array Sorting, Next: Two-way I/O, Prev: Nondecimal Data, Up: Advanced Features @@ -18976,7 +19021,7 @@ pre-defined values to `PROCINFO["sorted_in"]' in order to control the order in which `gawk' traverses an array during a `for' loop. In addition, the value of `PROCINFO["sorted_in"]' can be a function -name. This lets you traverse an array based on any custom criterion. +name.(1) This lets you traverse an array based on any custom criterion. The array elements are ordered according to the return value of this function. The comparison function should be defined with at least four arguments: @@ -19091,7 +19136,7 @@ of the previous functions: according to login name. The following program sorts records by a specific field position and can be used for this purpose: - # sort.awk --- simple program to sort by field position + # passwd-sort.awk --- simple program to sort by field position # field position is specified by the global variable POS function cmp_field(i1, v1, i2, v2) @@ -19143,13 +19188,14 @@ seemingly ordered data: elements compare equal. This is usually not a problem, but letting the tied elements come out in arbitrary order can be an issue, especially when comparing item values. The partial ordering of the equal elements -may change during the next loop traversal, if other elements are added -or removed from the array. One way to resolve ties when comparing -elements with otherwise equal values is to include the indices in the -comparison rules. Note that doing this may make the loop traversal -less efficient, so consider it only if necessary. The following -comparison functions force a deterministic order, and are based on the -fact that the (string) indices of two elements are never equal: +may change the next time the array is traversed, if other elements are +added or removed from the array. One way to resolve ties when +comparing elements with otherwise equal values is to include the +indices in the comparison rules. Note that doing this may make the +loop traversal less efficient, so consider it only if necessary. The +following comparison functions force a deterministic order, and are +based on the fact that the (string) indices of two elements are never +equal: function cmp_numeric(i1, v1, i2, v2) { @@ -19188,6 +19234,11 @@ array has been reported to add 15% to 20% overhead to the execution time of `awk' programs. For this reason, sorted array traversal is not the default. + ---------- Footnotes ---------- + + (1) This is why the predefined sorting orders start with an `@' +character, which cannot be part of an identifier. + File: gawk.info, Node: Array Sorting Functions, Prev: Controlling Array Traversal, Up: Array Sorting @@ -19274,7 +19325,7 @@ fill in the result array. Because `IGNORECASE' affects string comparisons, the value of `IGNORECASE' also affects sorting for both `asort()' and `asorti()'. Note also that the locale's sorting order does _not_ come into play; -comparisons are based on character values only.(1) Caveat Emptor. +comparisons are based on character values only.(1) ---------- Footnotes ---------- @@ -19400,7 +19451,7 @@ using regular pipes. (1) Michael Brennan suggests the use of `rand()' to generate unique file names. This is a valid point; nevertheless, temporary files remain -more difficult than two-way pipes. +more difficult to use than two-way pipes. (2) This is very different from the same operator in the C shell and in Bash. @@ -19415,7 +19466,7 @@ File: gawk.info, Node: TCP/IP Networking, Next: Profiling, Prev: Two-way I/O, A host is a host from coast to coast, and no-one can talk to host that's close, unless the host that isn't close - is busy hung or dead. + is busy, hung, or dead. In addition to being able to open a two-way pipeline to a coprocess on the same system (*note Two-way I/O::), it is possible to make a two-way @@ -19439,8 +19490,8 @@ NET-TYPE PROTOCOL The protocol to use over IP. This must be either `tcp', or `udp', - for a TCP or UDP IP connection, respectively. The use of TCP is - recommended for most applications. + for a TCP or UDP IP connection, respectively. TCP should be used + for most applications. LOCAL-PORT The local TCP or UDP port number to use. Use a port number of `0' @@ -19466,10 +19517,10 @@ REMOTE-PORT Consider the following very simple example: BEGIN { - Service = "/inet/tcp/0/localhost/daytime" - Service |& getline - print $0 - close(Service) + Service = "/inet/tcp/0/localhost/daytime" + Service |& getline + print $0 + close(Service) } This program reads the current date and time from the local system's @@ -19734,9 +19785,9 @@ File: gawk.info, Node: Advanced Features Summary, Prev: Profiling, Up: Advanc `PROCINFO["sorted_in"]'. * You can use the `|&' operator to create a two-way pipe to a - co-process. You read from the co-process with `getline' and write + coprocess. You read from the coprocess with `getline' and write to it with `print' or `printf'. Use `close()' to close off the - co-process completely, or optionally, close off one side of the + coprocess completely, or optionally, close off one side of the two-way communications. * By using special "file names" with the `|&' operator, you can open @@ -26989,7 +27040,7 @@ There are two ways to get GNU software: supported. If you have the `wget' program, you can use a command like the following: - wget http://ftp.gnu.org/gnu/gawk/gawk-4.1.1.tar.gz + wget http://ftp.gnu.org/gnu/gawk/gawk-4.1.2.tar.gz The GNU software archive is mirrored around the world. The up-to-date list of mirror sites is available from the main FSF web site @@ -27008,25 +27059,25 @@ compression programs: `gzip', `bzip2', and `xz'. For simplicity, the rest of these instructions assume you are using the one compressed with the GNU Zip program, `gzip'. - Once you have the distribution (for example, `gawk-4.1.1.tar.gz'), + Once you have the distribution (for example, `gawk-4.1.2.tar.gz'), use `gzip' to expand the file and then use `tar' to extract it. You can use the following pipeline to produce the `gawk' distribution: - gzip -d -c gawk-4.1.1.tar.gz | tar -xvpf - + gzip -d -c gawk-4.1.2.tar.gz | tar -xvpf - On a system with GNU `tar', you can let `tar' do the decompression for you: - tar -xvpzf gawk-4.1.1.tar.gz + tar -xvpzf gawk-4.1.2.tar.gz -Extracting the archive creates a directory named `gawk-4.1.1' in the +Extracting the archive creates a directory named `gawk-4.1.2' in the current directory. The distribution file name is of the form `gawk-V.R.P.tar.gz'. The V represents the major version of `gawk', the R represents the current release of version V, and the P represents a "patch level", meaning that minor bugs have been fixed in the release. The current patch -level is 1, but when retrieving distributions, you should get the +level is 2, but when retrieving distributions, you should get the version with the highest version, release, and patch level. (Note, however, that patch levels greater than or equal to 70 denote "beta" or nonproduction software; you might not want to retrieve such a version @@ -27237,7 +27288,7 @@ Unix-derived systems, GNU/Linux, BSD-based systems, and the Cygwin environment for MS-Windows. After you have extracted the `gawk' distribution, `cd' to -`gawk-4.1.1'. Like most GNU software, `gawk' is configured +`gawk-4.1.2'. Like most GNU software, `gawk' is configured automatically for your system by running the `configure' program. This program is a Bourne shell script that is generated automatically using GNU Autoconf. (The Autoconf software is described fully starting with @@ -27664,8 +27715,8 @@ GNU tools, such as Bash, the GNU Compiler Collection (GCC), GNU Make, and other GNU programs. Compilation and installation for Cygwin is the same as for a Unix system: - tar -xvpzf gawk-4.1.1.tar.gz - cd gawk-4.1.1 + tar -xvpzf gawk-4.1.2.tar.gz + cd gawk-4.1.2 ./configure make @@ -27685,7 +27736,7 @@ use the `BINMODE' variable. This can cause problems with other Unix-like components that have been ported to MS-Windows that expect `gawk' to do automatic -translation of `"\r\n"', since it won't. Caveat Emptor! +translation of `"\r\n"', since it won't. File: gawk.info, Node: VMS Installation, Prev: PC Installation, Up: Non-Unix Installation @@ -28190,9 +28241,9 @@ B.6 Summary * The `gawk' distribution is available from GNU project's main distribution site, `ftp.gnu.org'. The canonical build recipe is: - wget http://ftp.gnu.org/gnu/gawk/gawk-4.1.1.tar.gz - tar -xvpzf gawk-4.1.1.tar.gz - cd gawk-4.1.1 + wget http://ftp.gnu.org/gnu/gawk/gawk-4.1.2.tar.gz + tar -xvpzf gawk-4.1.2.tar.gz + cd gawk-4.1.2 ./configure && make && make check * `gawk' may be built on non-POSIX systems as well. The currently @@ -31036,7 +31087,7 @@ Index * Menu: -* ! (exclamation point), ! operator: Boolean Ops. (line 67) +* ! (exclamation point), ! operator: Boolean Ops. (line 69) * ! (exclamation point), ! operator <1>: Egrep Program. (line 175) * ! (exclamation point), ! operator <2>: Ranges. (line 48) * ! (exclamation point), ! operator: Precedence. (line 52) @@ -31066,22 +31117,22 @@ Index * % (percent sign), %= operator <1>: Precedence. (line 95) * % (percent sign), %= operator: Assignment Ops. (line 130) * & (ampersand), && operator <1>: Precedence. (line 86) -* & (ampersand), && operator: Boolean Ops. (line 57) +* & (ampersand), && operator: Boolean Ops. (line 59) * & (ampersand), gsub()/gensub()/sub() functions and: Gory Details. (line 6) * ' (single quote): One-shot. (line 15) -* ' (single quote) in gawk command lines: Long. (line 33) +* ' (single quote) in gawk command lines: Long. (line 35) * ' (single quote), in shell commands: Quoting. (line 48) * ' (single quote), vs. apostrophe: Comments. (line 27) -* ' (single quote), with double quotes: Quoting. (line 70) +* ' (single quote), with double quotes: Quoting. (line 73) * () (parentheses), in a profile: Profiling. (line 146) * () (parentheses), regexp operator: Regexp Operators. (line 81) * * (asterisk), * operator, as multiplication operator: Precedence. (line 55) * * (asterisk), * operator, as regexp operator: Regexp Operators. (line 89) -* * (asterisk), * operator, null strings, matching: Gory Details. - (line 143) +* * (asterisk), * operator, null strings, matching: String Functions. + (line 535) * * (asterisk), ** operator <1>: Precedence. (line 49) * * (asterisk), ** operator: Arithmetic Ops. (line 81) * * (asterisk), **= operator <1>: Precedence. (line 95) @@ -31125,30 +31176,30 @@ Index * --include option: Options. (line 159) * --lint option <1>: Options. (line 185) * --lint option: Command Line. (line 20) -* --lint-old option: Options. (line 293) +* --lint-old option: Options. (line 295) * --load option: Options. (line 173) * --non-decimal-data option <1>: Nondecimal Data. (line 6) * --non-decimal-data option: Options. (line 211) * --non-decimal-data option, strtonum() function and: Nondecimal Data. - (line 36) -* --optimize option: Options. (line 235) -* --posix option: Options. (line 252) -* --posix option, --traditional option and: Options. (line 271) -* --pretty-print option: Options. (line 224) + (line 35) +* --optimize option: Options. (line 237) +* --posix option: Options. (line 254) +* --posix option, --traditional option and: Options. (line 273) +* --pretty-print option: Options. (line 226) * --profile option <1>: Profiling. (line 12) -* --profile option: Options. (line 240) -* --re-interval option: Options. (line 277) -* --sandbox option: Options. (line 284) +* --profile option: Options. (line 242) +* --re-interval option: Options. (line 279) +* --sandbox option: Options. (line 286) * --sandbox option, disabling system() function: I/O Functions. - (line 97) + (line 96) * --sandbox option, input redirection with getline: Getline. (line 19) * --sandbox option, output redirection with print, printf: Redirection. (line 6) * --source option: Options. (line 117) * --traditional option: Options. (line 81) -* --traditional option, --posix option and: Options. (line 271) -* --use-lc-numeric option: Options. (line 219) -* --version option: Options. (line 298) +* --traditional option, --posix option and: Options. (line 273) +* --use-lc-numeric option: Options. (line 221) +* --version option: Options. (line 300) * --with-whiny-user-strftime configuration option: Additional Configuration Options. (line 35) * -b option: Options. (line 68) @@ -31156,32 +31207,32 @@ Index * -c option: Options. (line 81) * -D option: Options. (line 108) * -d option: Options. (line 93) -* -e option: Options. (line 333) +* -e option: Options. (line 336) * -E option: Options. (line 125) * -e option: Options. (line 117) * -f option: Options. (line 25) * -F option: Options. (line 21) * -f option: Long. (line 12) -* -F option, -Ft sets FS to TAB: Options. (line 306) +* -F option, -Ft sets FS to TAB: Options. (line 308) * -F option, command-line: Command Line Field Separator. (line 6) -* -f option, multiple uses: Options. (line 311) +* -f option, multiple uses: Options. (line 313) * -g option: Options. (line 147) * -h option: Options. (line 154) * -i option: Options. (line 159) -* -L option: Options. (line 293) +* -L option: Options. (line 295) * -l option: Options. (line 173) * -M option: Options. (line 205) -* -N option: Options. (line 219) +* -N option: Options. (line 221) * -n option: Options. (line 211) -* -O option: Options. (line 235) -* -o option: Options. (line 224) -* -P option: Options. (line 252) -* -p option: Options. (line 240) -* -r option: Options. (line 277) -* -S option: Options. (line 284) +* -O option: Options. (line 237) +* -o option: Options. (line 226) +* -P option: Options. (line 254) +* -p option: Options. (line 242) +* -r option: Options. (line 279) +* -S option: Options. (line 286) * -v option: Assignment Options. (line 12) -* -V option: Options. (line 298) +* -V option: Options. (line 300) * -v option: Options. (line 32) * -W option: Options. (line 46) * . (period), regexp operator: Regexp Operators. (line 44) @@ -31201,8 +31252,8 @@ Index (line 148) * / (forward slash), patterns and: Expression Patterns. (line 24) * /= operator vs. /=.../ regexp constant: Assignment Ops. (line 148) -* /dev/... special files: Special FD. (line 46) -* /dev/fd/N special files (gawk): Special FD. (line 46) +* /dev/... special files: Special FD. (line 48) +* /dev/fd/N special files (gawk): Special FD. (line 48) * /inet/... special files (gawk): TCP/IP Networking. (line 6) * /inet4/... special files (gawk): TCP/IP Networking. (line 6) * /inet6/... special files (gawk): TCP/IP Networking. (line 6) @@ -31275,7 +31326,7 @@ Index * \ (backslash), \y operator (gawk): GNU Regexp Operators. (line 38) * \ (backslash), as field separator: Command Line Field Separator. - (line 27) + (line 24) * \ (backslash), continuing lines and: Statements/Lines. (line 19) * \ (backslash), continuing lines and, comments and: Statements/Lines. (line 76) @@ -31338,12 +31389,12 @@ Index * ambiguity, syntactic: /= operator vs. /=.../ regexp constant: Assignment Ops. (line 148) * ampersand (&), && operator <1>: Precedence. (line 86) -* ampersand (&), && operator: Boolean Ops. (line 57) +* ampersand (&), && operator: Boolean Ops. (line 59) * ampersand (&), gsub()/gensub()/sub() functions and: Gory Details. (line 6) -* anagram.awk program: Anagram Program. (line 22) +* anagram.awk program: Anagram Program. (line 21) * anagrams, finding: Anagram Program. (line 6) -* and: Bitwise Functions. (line 39) +* and: Bitwise Functions. (line 40) * AND bitwise operation: Bitwise Functions. (line 6) * and Boolean-logic operator: Boolean Ops. (line 6) * ANSI: Glossary. (line 34) @@ -31359,25 +31410,25 @@ Index * arctangent: Numeric Functions. (line 11) * ARGC/ARGV variables: Auto-set. (line 15) * ARGC/ARGV variables, command-line arguments: Other Arguments. - (line 12) + (line 15) * ARGC/ARGV variables, how to use: ARGC and ARGV. (line 6) * ARGC/ARGV variables, portability and: Executable Scripts. (line 59) * ARGIND variable: Auto-set. (line 44) -* ARGIND variable, command-line arguments: Other Arguments. (line 12) +* ARGIND variable, command-line arguments: Other Arguments. (line 15) * arguments, command-line <1>: ARGC and ARGV. (line 6) * arguments, command-line <2>: Auto-set. (line 15) * arguments, command-line: Other Arguments. (line 6) * arguments, command-line, invoking awk: Command Line. (line 6) * arguments, in function calls: Function Calls. (line 18) * arguments, processing: Getopt Function. (line 6) -* ARGV array, indexing into: Other Arguments. (line 12) +* ARGV array, indexing into: Other Arguments. (line 15) * arithmetic operators: Arithmetic Ops. (line 6) * array manipulation in extensions: Array Manipulation. (line 6) * array members: Reference to Elements. (line 6) * array scanning order, controlling: Controlling Scanning. (line 14) -* array, number of elements: String Functions. (line 197) +* array, number of elements: String Functions. (line 200) * arrays: Arrays. (line 6) * arrays of arrays: Arrays of Arrays. (line 6) * arrays, an example of using: Array Example. (line 6) @@ -31385,7 +31436,7 @@ Index * arrays, as parameters to functions: Pass By Value/Reference. (line 47) * arrays, associative: Array Intro. (line 50) -* arrays, associative, library functions and: Library Names. (line 57) +* arrays, associative, library functions and: Library Names. (line 58) * arrays, deleting entire contents: Delete. (line 39) * arrays, elements that don't exist: Reference to Elements. (line 23) @@ -31393,13 +31444,12 @@ Index * arrays, elements, deleting: Delete. (line 6) * arrays, elements, order of access by in operator: Scanning an Array. (line 48) -* arrays, elements, retrieving number of: String Functions. (line 42) +* arrays, elements, retrieving number of: String Functions. (line 41) * arrays, for statement and: Scanning an Array. (line 20) * arrays, indexing: Array Intro. (line 50) * arrays, merging into strings: Join Function. (line 6) * arrays, multidimensional: Multidimensional. (line 10) * arrays, multidimensional, scanning: Multiscanning. (line 11) -* arrays, names of, and names of functions/variables: Arrays. (line 18) * arrays, numeric subscripts: Numeric Array Subscripts. (line 6) * arrays, referencing elements: Reference to Elements. @@ -31420,12 +31470,12 @@ Index * ASCII: Ordinal Functions. (line 45) * asort <1>: Array Sorting Functions. (line 6) -* asort: String Functions. (line 42) +* asort: String Functions. (line 41) * asort() function (gawk), arrays, sorting: Array Sorting Functions. (line 6) * asorti <1>: Array Sorting Functions. (line 6) -* asorti: String Functions. (line 42) +* asorti: String Functions. (line 41) * asorti() function (gawk), arrays, sorting: Array Sorting Functions. (line 6) * assert() function (C library): Assert Function. (line 6) @@ -31442,8 +31492,8 @@ Index (line 55) * asterisk (*), * operator, as regexp operator: Regexp Operators. (line 89) -* asterisk (*), * operator, null strings, matching: Gory Details. - (line 143) +* asterisk (*), * operator, null strings, matching: String Functions. + (line 535) * asterisk (*), ** operator <1>: Precedence. (line 49) * asterisk (*), ** operator: Arithmetic Ops. (line 81) * asterisk (*), **= operator <1>: Precedence. (line 95) @@ -31455,7 +31505,7 @@ Index * awf (amazingly workable formatter) program: Glossary. (line 24) * awk debugging, enabling: Options. (line 108) * awk language, POSIX version: Assignment Ops. (line 137) -* awk profiling, enabling: Options. (line 240) +* awk profiling, enabling: Options. (line 242) * awk programs <1>: Two Rules. (line 6) * awk programs <2>: Executable Scripts. (line 6) * awk programs: Getting Started. (line 12) @@ -31481,7 +31531,7 @@ Index * awk, gawk and <1>: This Manual. (line 14) * awk, gawk and: Preface. (line 21) * awk, history of: History. (line 17) -* awk, implementation issues, pipes: Redirection. (line 135) +* awk, implementation issues, pipes: Redirection. (line 129) * awk, implementations: Other Versions. (line 6) * awk, implementations, limits: Getline Notes. (line 14) * awk, invoking: Command Line. (line 6) @@ -31490,7 +31540,7 @@ Index * awk, POSIX and: Preface. (line 21) * awk, POSIX and, See Also POSIX awk: Preface. (line 21) * awk, regexp constants and: Comparison Operators. - (line 102) + (line 103) * awk, See Also gawk: Preface. (line 34) * awk, terms describing: This Manual. (line 6) * awk, uses for <1>: When. (line 6) @@ -31545,7 +31595,7 @@ Index * backslash (\), \y operator (gawk): GNU Regexp Operators. (line 38) * backslash (\), as field separator: Command Line Field Separator. - (line 27) + (line 24) * backslash (\), continuing lines and: Statements/Lines. (line 19) * backslash (\), continuing lines and, comments and: Statements/Lines. (line 76) @@ -31576,18 +31626,18 @@ Index * BEGIN pattern, next/nextfile statements and <1>: Next Statement. (line 44) * BEGIN pattern, next/nextfile statements and: I/O And BEGIN/END. - (line 36) + (line 37) * BEGIN pattern, OFS/ORS variables, assigning values to: Output Separators. (line 20) * BEGIN pattern, operators and: Using BEGIN/END. (line 17) * BEGIN pattern, print statement and: I/O And BEGIN/END. (line 16) * BEGIN pattern, pwcat program: Passwd Functions. (line 143) -* BEGIN pattern, running awk programs and: Cut Program. (line 68) +* BEGIN pattern, running awk programs and: Cut Program. (line 63) * BEGIN pattern, TEXTDOMAIN variable and: Programmer i18n. (line 60) * BEGINFILE pattern: BEGINFILE/ENDFILE. (line 6) * BEGINFILE pattern, Boolean patterns and: Expression Patterns. (line 70) -* beginfile() user-defined function: Filetrans Function. (line 62) +* beginfile() user-defined function: Filetrans Function. (line 61) * Bentley, Jon: Glossary. (line 143) * Benzinger, Michael: Contributors. (line 97) * Berry, Karl <1>: Ranges and Locales. (line 74) @@ -31601,11 +31651,11 @@ Index * BINMODE variable <1>: PC Using. (line 33) * BINMODE variable: User-modified. (line 15) * bit-manipulation functions: Bitwise Functions. (line 6) -* bits2str() user-defined function: Bitwise Functions. (line 70) -* bitwise AND: Bitwise Functions. (line 39) -* bitwise complement: Bitwise Functions. (line 43) -* bitwise OR: Bitwise Functions. (line 49) -* bitwise XOR: Bitwise Functions. (line 55) +* bits2str() user-defined function: Bitwise Functions. (line 71) +* bitwise AND: Bitwise Functions. (line 40) +* bitwise complement: Bitwise Functions. (line 44) +* bitwise OR: Bitwise Functions. (line 50) +* bitwise XOR: Bitwise Functions. (line 56) * bitwise, complement: Bitwise Functions. (line 25) * bitwise, operations: Bitwise Functions. (line 6) * bitwise, shift: Bitwise Functions. (line 32) @@ -31649,8 +31699,8 @@ Index * Brennan, Michael: Foreword. (line 83) * Brian Kernighan's awk <1>: I/O Functions. (line 43) * Brian Kernighan's awk <2>: Gory Details. (line 19) -* Brian Kernighan's awk <3>: String Functions. (line 490) -* Brian Kernighan's awk <4>: Delete. (line 48) +* Brian Kernighan's awk <3>: String Functions. (line 491) +* Brian Kernighan's awk <4>: Delete. (line 51) * Brian Kernighan's awk <5>: Nextfile Statement. (line 47) * Brian Kernighan's awk <6>: Continue Statement. (line 44) * Brian Kernighan's awk <7>: Break Statement. (line 51) @@ -31675,8 +31725,8 @@ Index * Buening, Andreas <2>: Contributors. (line 92) * Buening, Andreas: Acknowledgments. (line 60) * buffering, input/output <1>: Two-way I/O. (line 52) -* buffering, input/output: I/O Functions. (line 140) -* buffering, interactive vs. noninteractive: I/O Functions. (line 109) +* buffering, input/output: I/O Functions. (line 139) +* buffering, interactive vs. noninteractive: I/O Functions. (line 108) * buffers, flushing: I/O Functions. (line 32) * buffers, operators for: GNU Regexp Operators. (line 48) @@ -31706,7 +31756,7 @@ Index * case sensitivity, and regexps: User-modified. (line 76) * case sensitivity, and string comparisons: User-modified. (line 76) * case sensitivity, array indices and: Array Intro. (line 94) -* case sensitivity, converting case: String Functions. (line 520) +* case sensitivity, converting case: String Functions. (line 521) * case sensitivity, example programs: Library Functions. (line 53) * case sensitivity, gawk: Case-sensitivity. (line 26) * case sensitivity, regexps and: Case-sensitivity. (line 6) @@ -31742,7 +31792,7 @@ Index * close() function, portability: Close Files And Pipes. (line 81) * close() function, return value: Close Files And Pipes. - (line 131) + (line 132) * close() function, two-way pipes and: Two-way I/O. (line 59) * Close, Diane <1>: Contributors. (line 20) * Close, Diane: Manual History. (line 34) @@ -31778,15 +31828,15 @@ Index * commenting, backslash continuation and: Statements/Lines. (line 76) * common extensions, ** operator: Arithmetic Ops. (line 30) * common extensions, **= operator: Assignment Ops. (line 137) -* common extensions, /dev/stderr special file: Special FD. (line 46) -* common extensions, /dev/stdin special file: Special FD. (line 46) -* common extensions, /dev/stdout special file: Special FD. (line 46) +* common extensions, /dev/stderr special file: Special FD. (line 48) +* common extensions, /dev/stdin special file: Special FD. (line 48) +* common extensions, /dev/stdout special file: Special FD. (line 48) * common extensions, \x escape sequence: Escape Sequences. (line 61) * common extensions, BINMODE variable: PC Using. (line 33) * common extensions, delete to delete entire arrays: Delete. (line 39) * common extensions, func keyword: Definition Syntax. (line 93) * common extensions, length() applied to an array: String Functions. - (line 197) + (line 200) * common extensions, RS as a regexp: gawk split records. (line 6) * common extensions, single character fields: Single Character Fields. (line 6) @@ -31795,7 +31845,7 @@ Index (line 9) * comparison expressions, as patterns: Expression Patterns. (line 14) * comparison expressions, string vs. regexp: Comparison Operators. - (line 78) + (line 79) * compatibility mode (gawk), extensions: POSIX/GNU. (line 6) * compatibility mode (gawk), file names: Special Caveats. (line 9) * compatibility mode (gawk), hexadecimal numbers: Nondecimal-numbers. @@ -31809,7 +31859,7 @@ Index * compiling gawk for MS-DOS and MS-Windows: PC Compiling. (line 13) * compiling gawk for VMS: VMS Compilation. (line 6) * compiling gawk with EMX for OS/2: PC Compiling. (line 28) -* compl: Bitwise Functions. (line 43) +* compl: Bitwise Functions. (line 44) * complement, bitwise: Bitwise Functions. (line 25) * compound statements, control statements and: Statements. (line 10) * concatenating: Concatenation. (line 8) @@ -31835,15 +31885,15 @@ Index * control statements: Statements. (line 6) * controlling array scanning order: Controlling Scanning. (line 14) -* convert string to lower case: String Functions. (line 521) -* convert string to number: String Functions. (line 388) -* convert string to upper case: String Functions. (line 527) +* convert string to lower case: String Functions. (line 522) +* convert string to number: String Functions. (line 389) +* convert string to upper case: String Functions. (line 528) * converting integer array subscripts: Numeric Array Subscripts. (line 31) * converting, dates to timestamps: Time Functions. (line 76) -* converting, numbers to strings <1>: Bitwise Functions. (line 109) +* converting, numbers to strings <1>: Bitwise Functions. (line 110) * converting, numbers to strings: Strings And Numbers. (line 6) -* converting, strings to numbers <1>: Bitwise Functions. (line 109) +* converting, strings to numbers <1>: Bitwise Functions. (line 110) * converting, strings to numbers: Strings And Numbers. (line 6) * CONVFMT variable <1>: User-modified. (line 30) * CONVFMT variable: Strings And Numbers. (line 29) @@ -31851,7 +31901,7 @@ Index (line 6) * cookie: Glossary. (line 149) * coprocesses <1>: Two-way I/O. (line 25) -* coprocesses: Redirection. (line 102) +* coprocesses: Redirection. (line 96) * coprocesses, closing: Close Files And Pipes. (line 6) * coprocesses, getline from: Getline/Coprocess. (line 6) @@ -31859,7 +31909,7 @@ Index * cosine: Numeric Functions. (line 15) * counting: Wc Program. (line 6) * csh utility: Statements/Lines. (line 44) -* csh utility, POSIXLY_CORRECT environment variable: Options. (line 351) +* csh utility, POSIXLY_CORRECT environment variable: Options. (line 354) * csh utility, |& operator, comparison with: Two-way I/O. (line 25) * ctime() user-defined function: Function Example. (line 74) * currency symbols, localization: Explaining gettext. (line 104) @@ -31884,11 +31934,11 @@ Index (line 43) * dark corner, break statement: Break Statement. (line 51) * dark corner, close() function: Close Files And Pipes. - (line 131) + (line 132) * dark corner, command-line arguments: Assignment Options. (line 43) * dark corner, continue statement: Continue Statement. (line 44) * dark corner, CONVFMT variable: Strings And Numbers. (line 40) -* dark corner, escape sequences: Other Arguments. (line 35) +* dark corner, escape sequences: Other Arguments. (line 38) * dark corner, escape sequences, for metacharacters: Escape Sequences. (line 142) * dark corner, exit statement: Exit Statement. (line 30) @@ -31900,9 +31950,9 @@ Index * dark corner, format-control characters: Control Letters. (line 18) * dark corner, FS as null string: Single Character Fields. (line 20) -* dark corner, input files: awk split records. (line 110) +* dark corner, input files: awk split records. (line 111) * dark corner, invoking awk: Command Line. (line 16) -* dark corner, length() function: String Functions. (line 183) +* dark corner, length() function: String Functions. (line 186) * dark corner, locale's decimal point character: Locale influences conversions. (line 17) * dark corner, multiline records: Multiple Line. (line 35) @@ -31914,7 +31964,7 @@ Index (line 148) * dark corner, regexp constants, as arguments to user-defined functions: Using Constant Regexps. (line 43) -* dark corner, split() function: String Functions. (line 359) +* dark corner, split() function: String Functions. (line 360) * dark corner, strings, storing: gawk split records. (line 83) * dark corner, value of ARGV[0]: Auto-set. (line 39) * data, fixed-width: Constant Size. (line 10) @@ -32043,7 +32093,7 @@ Index * debugger, read commands from a file: Debugger Info. (line 96) * debugging awk programs: Debugger. (line 6) * debugging gawk, bug reports: Bugs. (line 9) -* decimal point character, locale specific: Options. (line 268) +* decimal point character, locale specific: Options. (line 270) * decrement operators: Increment Ops. (line 35) * default keyword: Switch Statement. (line 6) * Deifik, Scott <1>: Bugs. (line 71) @@ -32060,7 +32110,7 @@ Index * deleting entire arrays: Delete. (line 39) * Demaille, Akim: Acknowledgments. (line 60) * describe call stack frame, in debugger: Debugger Info. (line 27) -* differences between gawk and awk: String Functions. (line 197) +* differences between gawk and awk: String Functions. (line 200) * differences in awk and gawk, ARGC/ARGV variables: ARGC and ARGV. (line 90) * differences in awk and gawk, ARGIND variable: Auto-set. (line 44) @@ -32083,7 +32133,7 @@ Index * differences in awk and gawk, command-line directories: Command-line directories. (line 6) * differences in awk and gawk, ERRNO variable: Auto-set. (line 82) -* differences in awk and gawk, error messages: Special FD. (line 16) +* differences in awk and gawk, error messages: Special FD. (line 19) * differences in awk and gawk, FIELDWIDTHS variable: User-modified. (line 37) * differences in awk and gawk, FPAT variable: User-modified. (line 43) @@ -32094,26 +32144,26 @@ Index * differences in awk and gawk, IGNORECASE variable: User-modified. (line 76) * differences in awk and gawk, implementation limitations <1>: Redirection. - (line 135) + (line 129) * differences in awk and gawk, implementation limitations: Getline Notes. (line 14) * differences in awk and gawk, indirect function calls: Indirect Calls. (line 6) * differences in awk and gawk, input/output operators <1>: Redirection. - (line 102) + (line 96) * differences in awk and gawk, input/output operators: Getline/Coprocess. (line 6) * differences in awk and gawk, line continuations: Conditional Exp. (line 34) * differences in awk and gawk, LINT variable: User-modified. (line 88) * differences in awk and gawk, match() function: String Functions. - (line 260) + (line 262) * differences in awk and gawk, print/printf statements: Format Modifiers. (line 13) * differences in awk and gawk, PROCINFO array: Auto-set. (line 137) * differences in awk and gawk, read timeouts: Read Timeout. (line 6) * differences in awk and gawk, record separators: awk split records. - (line 124) + (line 125) * differences in awk and gawk, regexp constants: Using Constant Regexps. (line 43) * differences in awk and gawk, regular expressions: Case-sensitivity. @@ -32124,13 +32174,13 @@ Index * differences in awk and gawk, single-character fields: Single Character Fields. (line 6) * differences in awk and gawk, split() function: String Functions. - (line 347) + (line 348) * differences in awk and gawk, strings: Scalar Constants. (line 20) * differences in awk and gawk, strings, storing: gawk split records. (line 77) * differences in awk and gawk, SYMTAB variable: Auto-set. (line 276) * differences in awk and gawk, TEXTDOMAIN variable: User-modified. - (line 152) + (line 151) * differences in awk and gawk, trunc-mod operation: Arithmetic Ops. (line 66) * directories, command-line: Command-line directories. @@ -32185,7 +32235,7 @@ Index * empty array elements: Reference to Elements. (line 18) * empty pattern: Empty. (line 6) -* empty strings: awk split records. (line 114) +* empty strings: awk split records. (line 115) * empty strings, See null strings: Regexp Field Splitting. (line 43) * enable breakpoint: Breakpoint Control. (line 73) @@ -32202,16 +32252,16 @@ Index * END pattern, next/nextfile statements and <1>: Next Statement. (line 44) * END pattern, next/nextfile statements and: I/O And BEGIN/END. - (line 36) + (line 37) * END pattern, operators and: Using BEGIN/END. (line 17) * END pattern, print statement and: I/O And BEGIN/END. (line 16) * ENDFILE pattern: BEGINFILE/ENDFILE. (line 6) * ENDFILE pattern, Boolean patterns and: Expression Patterns. (line 70) -* endfile() user-defined function: Filetrans Function. (line 62) -* endgrent() function (C library): Group Functions. (line 212) -* endgrent() user-defined function: Group Functions. (line 215) -* endpwent() function (C library): Passwd Functions. (line 210) -* endpwent() user-defined function: Passwd Functions. (line 213) +* endfile() user-defined function: Filetrans Function. (line 61) +* endgrent() function (C library): Group Functions. (line 211) +* endgrent() user-defined function: Group Functions. (line 214) +* endpwent() function (C library): Passwd Functions. (line 207) +* endpwent() user-defined function: Passwd Functions. (line 210) * English, Steve: Advanced Features. (line 6) * ENVIRON array: Auto-set. (line 60) * environment variables used by gawk: Environment Variables. @@ -32227,9 +32277,9 @@ Index * ERRNO variable: Auto-set. (line 82) * ERRNO variable, with BEGINFILE pattern: BEGINFILE/ENDFILE. (line 26) * ERRNO variable, with close() function: Close Files And Pipes. - (line 139) + (line 140) * ERRNO variable, with getline command: Getline. (line 19) -* error handling: Special FD. (line 16) +* error handling: Special FD. (line 19) * error handling, ERRNO variable and: Auto-set. (line 82) * error output: Special FD. (line 6) * escape processing, gsub()/gensub()/sub() functions: Gory Details. @@ -32245,7 +32295,7 @@ Index * examining fields: Fields. (line 6) * exclamation point (!), ! operator <1>: Egrep Program. (line 175) * exclamation point (!), ! operator <2>: Precedence. (line 52) -* exclamation point (!), ! operator: Boolean Ops. (line 67) +* exclamation point (!), ! operator: Boolean Ops. (line 69) * exclamation point (!), != operator <1>: Precedence. (line 65) * exclamation point (!), != operator: Comparison Operators. (line 11) @@ -32296,16 +32346,16 @@ Index * extensions, Brian Kernighan's awk: BTL. (line 6) * extensions, common, ** operator: Arithmetic Ops. (line 30) * extensions, common, **= operator: Assignment Ops. (line 137) -* extensions, common, /dev/stderr special file: Special FD. (line 46) -* extensions, common, /dev/stdin special file: Special FD. (line 46) -* extensions, common, /dev/stdout special file: Special FD. (line 46) +* extensions, common, /dev/stderr special file: Special FD. (line 48) +* extensions, common, /dev/stdin special file: Special FD. (line 48) +* extensions, common, /dev/stdout special file: Special FD. (line 48) * extensions, common, \x escape sequence: Escape Sequences. (line 61) * extensions, common, BINMODE variable: PC Using. (line 33) * extensions, common, delete to delete entire arrays: Delete. (line 39) * extensions, common, fflush() function: I/O Functions. (line 43) * extensions, common, func keyword: Definition Syntax. (line 93) * extensions, common, length() applied to an array: String Functions. - (line 197) + (line 200) * extensions, common, RS as a regexp: gawk split records. (line 6) * extensions, common, single character fields: Single Character Fields. (line 6) @@ -32345,7 +32395,7 @@ Index (line 6) * field separators, regular expressions as: Field Separators. (line 51) * field separators, See Also OFS: Changing Fields. (line 64) -* field separators, spaces as: Cut Program. (line 108) +* field separators, spaces as: Cut Program. (line 103) * fields <1>: Basic High Level. (line 73) * fields <2>: Fields. (line 6) * fields: Reading Files. (line 14) @@ -32365,7 +32415,7 @@ Index * file inclusion, @include directive: Include Files. (line 8) * file names, distinguishing: Auto-set. (line 56) * file names, in compatibility mode: Special Caveats. (line 9) -* file names, standard streams in gawk: Special FD. (line 46) +* file names, standard streams in gawk: Special FD. (line 48) * FILENAME variable <1>: Auto-set. (line 98) * FILENAME variable: Reading Files. (line 6) * FILENAME variable, getline, setting with: Getline Notes. (line 19) @@ -32378,7 +32428,7 @@ Index * files, .po: Explaining gettext. (line 37) * files, .po, converting to .mo: I18N Example. (line 63) * files, .pot: Explaining gettext. (line 31) -* files, /dev/... special files: Special FD. (line 46) +* files, /dev/... special files: Special FD. (line 48) * files, /inet/... (gawk): TCP/IP Networking. (line 6) * files, /inet4/... (gawk): TCP/IP Networking. (line 6) * files, /inet6/... (gawk): TCP/IP Networking. (line 6) @@ -32401,7 +32451,7 @@ Index (line 47) * files, message object, specifying directory of: Explaining gettext. (line 54) -* files, multiple passes over: Other Arguments. (line 53) +* files, multiple passes over: Other Arguments. (line 56) * files, multiple, duplicating output into: Tee Program. (line 6) * files, output, See output files: Close Files And Pipes. (line 6) @@ -32427,7 +32477,7 @@ Index * Fish, Fred: Contributors. (line 50) * fixed-width data: Constant Size. (line 10) * flag variables <1>: Tee Program. (line 20) -* flag variables: Boolean Ops. (line 67) +* flag variables: Boolean Ops. (line 69) * floating-point, numbers, arbitrary precision: Arbitrary Precision Arithmetic. (line 6) * floating-point, VAX/VMS: VMS Running. (line 51) @@ -32450,7 +32500,7 @@ Index * format time string: Time Functions. (line 48) * formats, numeric output: OFMT. (line 6) * formatting output: Printf. (line 6) -* formatting strings: String Functions. (line 381) +* formatting strings: String Functions. (line 382) * forward slash (/) to enclose regular expressions: Regexp. (line 10) * forward slash (/), / operator: Precedence. (line 55) * forward slash (/), /= operator <1>: Precedence. (line 95) @@ -32473,9 +32523,9 @@ Index * FS variable, --field-separator option and: Options. (line 21) * FS variable, as null string: Single Character Fields. (line 20) -* FS variable, as TAB character: Options. (line 264) +* FS variable, as TAB character: Options. (line 266) * FS variable, changing value of: Field Separators. (line 35) -* FS variable, running awk programs and: Cut Program. (line 68) +* FS variable, running awk programs and: Cut Program. (line 63) * FS variable, setting from command line: Command Line Field Separator. (line 6) * FS, containing ^: Regexp Field Splitting. @@ -32500,7 +32550,7 @@ Index * functions, defining: Definition Syntax. (line 9) * functions, library: Library Functions. (line 6) * functions, library, assertions: Assert Function. (line 6) -* functions, library, associative arrays and: Library Names. (line 57) +* functions, library, associative arrays and: Library Names. (line 58) * functions, library, C library: Getopt Function. (line 6) * functions, library, character values as numbers: Ordinal Functions. (line 6) @@ -32520,8 +32570,7 @@ Index * functions, library, rounding numbers: Round Function. (line 6) * functions, library, user database, reading: Passwd Functions. (line 6) -* functions, names of <1>: Definition Syntax. (line 23) -* functions, names of: Arrays. (line 18) +* functions, names of: Definition Syntax. (line 23) * functions, recursive: Definition Syntax. (line 83) * functions, string-translation: I18N Functions. (line 6) * functions, undefined: Pass By Value/Reference. @@ -32538,18 +32587,16 @@ Index * Garfinkle, Scott: Contributors. (line 34) * gawk program, dynamic profiling: Profiling. (line 179) * gawk version: Auto-set. (line 214) -* gawk, ARGIND variable in: Other Arguments. (line 12) +* gawk, ARGIND variable in: Other Arguments. (line 15) * gawk, awk and <1>: This Manual. (line 14) * gawk, awk and: Preface. (line 21) -* gawk, bitwise operations in: Bitwise Functions. (line 39) +* gawk, bitwise operations in: Bitwise Functions. (line 40) * gawk, break statement in: Break Statement. (line 51) * gawk, built-in variables and: Built-in Variables. (line 14) * gawk, character classes and: Bracket Expressions. (line 100) * gawk, coding style in: Adding Code. (line 39) * gawk, command-line options, and regular expressions: GNU Regexp Operators. (line 70) -* gawk, comparison operators and: Comparison Operators. - (line 50) * gawk, configuring: Configuration Philosophy. (line 6) * gawk, configuring, options: Additional Configuration Options. @@ -32561,10 +32608,10 @@ Index * gawk, ERRNO variable in <2>: Auto-set. (line 82) * gawk, ERRNO variable in <3>: BEGINFILE/ENDFILE. (line 26) * gawk, ERRNO variable in <4>: Close Files And Pipes. - (line 139) + (line 140) * gawk, ERRNO variable in: Getline. (line 19) * gawk, escape sequences: Escape Sequences. (line 132) -* gawk, extensions, disabling: Options. (line 252) +* gawk, extensions, disabling: Options. (line 254) * gawk, features, adding: Adding Code. (line 6) * gawk, features, advanced: Advanced Features. (line 6) * gawk, field separators and: User-modified. (line 71) @@ -32580,7 +32627,7 @@ Index * gawk, hexadecimal numbers and: Nondecimal-numbers. (line 42) * gawk, IGNORECASE variable in <1>: Array Sorting Functions. (line 83) -* gawk, IGNORECASE variable in <2>: String Functions. (line 58) +* gawk, IGNORECASE variable in <2>: String Functions. (line 57) * gawk, IGNORECASE variable in <3>: Array Intro. (line 94) * gawk, IGNORECASE variable in <4>: User-modified. (line 76) * gawk, IGNORECASE variable in: Case-sensitivity. (line 26) @@ -32589,7 +32636,7 @@ Index * gawk, implementation issues, downward compatibility: Compatibility Mode. (line 6) * gawk, implementation issues, limits: Getline Notes. (line 14) -* gawk, implementation issues, pipes: Redirection. (line 135) +* gawk, implementation issues, pipes: Redirection. (line 129) * gawk, installing: Installation. (line 6) * gawk, internationalization and, See internationalization: Internationalization. (line 13) @@ -32616,16 +32663,16 @@ Index * gawk, regular expressions, precedence: Regexp Operators. (line 161) * gawk, RT variable in <1>: Auto-set. (line 272) * gawk, RT variable in <2>: Multiple Line. (line 129) -* gawk, RT variable in: awk split records. (line 124) +* gawk, RT variable in: awk split records. (line 125) * gawk, See Also awk: Preface. (line 34) * gawk, source code, obtaining: Getting. (line 6) * gawk, splitting fields and: Constant Size. (line 88) * gawk, string-translation functions: I18N Functions. (line 6) * gawk, SYMTAB array in: Auto-set. (line 276) -* gawk, TEXTDOMAIN variable in: User-modified. (line 152) +* gawk, TEXTDOMAIN variable in: User-modified. (line 151) * gawk, timestamps: Time Functions. (line 6) * gawk, uses for: Preface. (line 34) -* gawk, versions of, information about, printing: Options. (line 298) +* gawk, versions of, information about, printing: Options. (line 300) * gawk, VMS version of: VMS Installation. (line 6) * gawk, word-boundary operator: GNU Regexp Operators. (line 63) @@ -32641,12 +32688,12 @@ Index * getaddrinfo() function (C library): TCP/IP Networking. (line 38) * getgrent() function (C library): Group Functions. (line 6) * getgrent() user-defined function: Group Functions. (line 6) -* getgrgid() function (C library): Group Functions. (line 183) -* getgrgid() user-defined function: Group Functions. (line 186) -* getgrnam() function (C library): Group Functions. (line 172) -* getgrnam() user-defined function: Group Functions. (line 177) -* getgruser() function (C library): Group Functions. (line 192) -* getgruser() function, user-defined: Group Functions. (line 195) +* getgrgid() function (C library): Group Functions. (line 182) +* getgrgid() user-defined function: Group Functions. (line 185) +* getgrnam() function (C library): Group Functions. (line 171) +* getgrnam() user-defined function: Group Functions. (line 176) +* getgruser() function (C library): Group Functions. (line 191) +* getgruser() function, user-defined: Group Functions. (line 194) * getline command: Reading Files. (line 20) * getline command, _gr_init() user-defined function: Group Functions. (line 83) @@ -32670,10 +32717,10 @@ Index * getopt() user-defined function: Getopt Function. (line 108) * getpwent() function (C library): Passwd Functions. (line 16) * getpwent() user-defined function: Passwd Functions. (line 16) -* getpwnam() function (C library): Passwd Functions. (line 177) -* getpwnam() user-defined function: Passwd Functions. (line 182) -* getpwuid() function (C library): Passwd Functions. (line 188) -* getpwuid() user-defined function: Passwd Functions. (line 192) +* getpwnam() function (C library): Passwd Functions. (line 174) +* getpwnam() user-defined function: Passwd Functions. (line 179) +* getpwuid() function (C library): Passwd Functions. (line 185) +* getpwuid() user-defined function: Passwd Functions. (line 189) * gettext library: Explaining gettext. (line 6) * gettext library, locale categories: Explaining gettext. (line 81) * gettext() function (C library): Explaining gettext. (line 63) @@ -32712,7 +32759,7 @@ Index * gsub <1>: String Functions. (line 139) * gsub: Using Constant Regexps. (line 43) -* gsub() function, arguments of: String Functions. (line 460) +* gsub() function, arguments of: String Functions. (line 461) * gsub() function, escape processing: Gory Details. (line 6) * h debugger command (alias for help): Miscellaneous Debugger Commands. (line 66) @@ -32758,9 +32805,9 @@ Index * Illumos, POSIX-compliant awk: Other Versions. (line 105) * implementation issues, gawk: Notes. (line 6) * implementation issues, gawk, debugging: Compatibility Mode. (line 6) -* implementation issues, gawk, limits <1>: Redirection. (line 135) +* implementation issues, gawk, limits <1>: Redirection. (line 129) * implementation issues, gawk, limits: Getline Notes. (line 14) -* in operator <1>: For Statement. (line 75) +* in operator <1>: For Statement. (line 76) * in operator <2>: Precedence. (line 83) * in operator: Comparison Operators. (line 11) @@ -32789,9 +32836,9 @@ Index * input files, examples: Sample Data Files. (line 6) * input files, reading: Reading Files. (line 6) * input files, running awk without: Read Terminal. (line 6) -* input files, variable assignments and: Other Arguments. (line 23) +* input files, variable assignments and: Other Arguments. (line 26) * input pipeline: Getline/Pipe. (line 9) -* input record, length of: String Functions. (line 174) +* input record, length of: String Functions. (line 177) * input redirection: Getline/File. (line 6) * input, data, nondecimal: Nondecimal Data. (line 6) * input, explicit: Getline. (line 6) @@ -32815,12 +32862,12 @@ Index * integers, arbitrary precision: Arbitrary Precision Integers. (line 6) * integers, unsigned: Computer Arithmetic. (line 41) -* interacting with other programs: I/O Functions. (line 75) +* interacting with other programs: I/O Functions. (line 74) * internationalization <1>: I18N and L10N. (line 6) * internationalization: I18N Functions. (line 6) * internationalization, localization <1>: Internationalization. (line 13) -* internationalization, localization: User-modified. (line 152) +* internationalization, localization: User-modified. (line 151) * internationalization, localization, character classes: Bracket Expressions. (line 100) * internationalization, localization, gawk and: Internationalization. @@ -32836,7 +32883,7 @@ Index * interpreted programs: Basic High Level. (line 15) * interval expressions, regexp operator: Regexp Operators. (line 116) * inventory-shipped file: Sample Data Files. (line 32) -* invoke shell command: I/O Functions. (line 75) +* invoke shell command: I/O Functions. (line 74) * isarray: Type Functions. (line 11) * ISO: Glossary. (line 367) * ISO 8859-1: Glossary. (line 133) @@ -32889,19 +32936,19 @@ Index * left angle bracket (<), <= operator <1>: Precedence. (line 65) * left angle bracket (<), <= operator: Comparison Operators. (line 11) -* left shift: Bitwise Functions. (line 46) +* left shift: Bitwise Functions. (line 47) * left shift, bitwise: Bitwise Functions. (line 32) * leftmost longest match: Multiple Line. (line 26) -* length: String Functions. (line 167) -* length of input record: String Functions. (line 174) -* length of string: String Functions. (line 167) +* length: String Functions. (line 170) +* length of input record: String Functions. (line 177) +* length of string: String Functions. (line 170) * Lesser General Public License (LGPL): Glossary. (line 396) * LGPL (Lesser General Public License): Glossary. (line 396) * libmawk: Other Versions. (line 121) * libraries of awk functions: Library Functions. (line 6) * libraries of awk functions, assertions: Assert Function. (line 6) * libraries of awk functions, associative arrays and: Library Names. - (line 57) + (line 58) * libraries of awk functions, character values as numbers: Ordinal Functions. (line 6) * libraries of awk functions, command-line options: Getopt Function. @@ -32921,7 +32968,7 @@ Index * libraries of awk functions, user database, reading: Passwd Functions. (line 6) * line breaks: Statements/Lines. (line 6) -* line continuations: Boolean Ops. (line 62) +* line continuations: Boolean Ops. (line 64) * line continuations, gawk: Conditional Exp. (line 34) * line continuations, in print statement: Print Examples. (line 76) * line continuations, with C shell: More Complex. (line 30) @@ -32937,7 +32984,7 @@ Index * lint checking, empty programs: Command Line. (line 16) * lint checking, issuing warnings: Options. (line 185) * lint checking, POSIXLY_CORRECT environment variable: Options. - (line 336) + (line 339) * lint checking, undefined functions: Pass By Value/Reference. (line 88) * LINT variable: User-modified. (line 88) @@ -32953,7 +33000,7 @@ Index * loading, extensions: Options. (line 173) * local variables, in a function: Variable Scope. (line 6) * locale categories: Explaining gettext. (line 81) -* locale decimal point character: Options. (line 268) +* locale decimal point character: Options. (line 270) * locale, definition of: Locales. (line 6) * localization: I18N and L10N. (line 6) * localization, See internationalization, localization: I18N and L10N. @@ -32967,7 +33014,7 @@ Index * long options: Command Line. (line 13) * loops: While Statement. (line 6) * loops, break statement and: Break Statement. (line 6) -* loops, continue statements and: For Statement. (line 64) +* loops, continue statements and: For Statement. (line 65) * loops, count for header, in a profile: Profiling. (line 131) * loops, do-while: Do Statement. (line 6) * loops, exiting: Break Statement. (line 6) @@ -32976,7 +33023,7 @@ Index * loops, See Also while statement: While Statement. (line 6) * loops, while: While Statement. (line 6) * ls utility: More Complex. (line 15) -* lshift: Bitwise Functions. (line 46) +* lshift: Bitwise Functions. (line 47) * lvalues/rvalues: Assignment Ops. (line 32) * mail-list file: Sample Data Files. (line 6) * mailing labels, printing: Labels Program. (line 6) @@ -32988,14 +33035,14 @@ Index (line 6) * marked strings, extracting: String Extraction. (line 6) * Marx, Groucho: Increment Ops. (line 60) -* match: String Functions. (line 207) -* match regexp in string: String Functions. (line 207) +* match: String Functions. (line 210) +* match regexp in string: String Functions. (line 210) * match() function, RSTART/RLENGTH variables: String Functions. - (line 224) + (line 227) * matching, expressions, See comparison expressions: Typing and Comparison. (line 9) * matching, leftmost longest: Multiple Line. (line 26) -* matching, null strings: Gory Details. (line 143) +* matching, null strings: String Functions. (line 535) * mawk utility <1>: Other Versions. (line 44) * mawk utility <2>: Nextfile Statement. (line 47) * mawk utility <3>: Concatenation. (line 36) @@ -33025,18 +33072,16 @@ Index * multiple-line records: Multiple Line. (line 6) * n debugger command (alias for next): Debugger Execution Control. (line 43) -* names, arrays/variables <1>: Library Names. (line 6) -* names, arrays/variables: Arrays. (line 18) +* names, arrays/variables: Library Names. (line 6) * names, functions <1>: Library Names. (line 6) * names, functions: Definition Syntax. (line 23) -* namespace issues <1>: Library Names. (line 6) -* namespace issues: Arrays. (line 18) +* namespace issues: Library Names. (line 6) * namespace issues, functions: Definition Syntax. (line 23) * NetBSD: Glossary. (line 611) * networks, programming: TCP/IP Networking. (line 6) * networks, support for: Special Network. (line 6) -* newlines <1>: Boolean Ops. (line 67) -* newlines <2>: Options. (line 258) +* newlines <1>: Boolean Ops. (line 69) +* newlines <2>: Options. (line 260) * newlines: Statements/Lines. (line 6) * newlines, as field separators: Default Field Splitting. (line 6) @@ -33051,14 +33096,14 @@ Index (line 43) * next file statement: Feature History. (line 169) * next statement <1>: Next Statement. (line 6) -* next statement: Boolean Ops. (line 93) -* next statement, BEGIN/END patterns and: I/O And BEGIN/END. (line 36) +* next statement: Boolean Ops. (line 95) +* next statement, BEGIN/END patterns and: I/O And BEGIN/END. (line 37) * next statement, BEGINFILE/ENDFILE patterns and: BEGINFILE/ENDFILE. (line 49) * next statement, user-defined functions and: Next Statement. (line 44) * nextfile statement: Nextfile Statement. (line 6) * nextfile statement, BEGIN/END patterns and: I/O And BEGIN/END. - (line 36) + (line 37) * nextfile statement, BEGINFILE/ENDFILE patterns and: BEGINFILE/ENDFILE. (line 26) * nextfile statement, user-defined functions and: Nextfile Statement. @@ -33081,16 +33126,16 @@ Index * null strings <2>: Truth Values. (line 6) * null strings <3>: Regexp Field Splitting. (line 43) -* null strings: awk split records. (line 114) -* null strings in gawk arguments, quoting and: Quoting. (line 79) +* null strings: awk split records. (line 115) +* null strings in gawk arguments, quoting and: Quoting. (line 82) * null strings, and deleting array elements: Delete. (line 27) * null strings, as array subscripts: Uninitialized Subscripts. (line 43) * null strings, converting numbers to strings: Strings And Numbers. (line 21) -* null strings, matching: Gory Details. (line 143) -* number as string of bits: Bitwise Functions. (line 109) -* number of array elements: String Functions. (line 197) +* null strings, matching: String Functions. (line 535) +* number as string of bits: Bitwise Functions. (line 110) +* number of array elements: String Functions. (line 200) * number sign (#), #! (executable scripts): Executable Scripts. (line 6) * number sign (#), commenting: Comments. (line 6) @@ -33099,7 +33144,7 @@ Index * numbers, as values of characters: Ordinal Functions. (line 6) * numbers, Cliff random: Cliff Random Function. (line 6) -* numbers, converting <1>: Bitwise Functions. (line 109) +* numbers, converting <1>: Bitwise Functions. (line 110) * numbers, converting: Strings And Numbers. (line 6) * numbers, converting, to strings: User-modified. (line 30) * numbers, hexadecimal: Nondecimal-numbers. (line 6) @@ -33117,7 +33162,7 @@ Index * OFMT variable <2>: Strings And Numbers. (line 57) * OFMT variable: OFMT. (line 15) * OFMT variable, POSIX awk and: OFMT. (line 27) -* OFS variable <1>: User-modified. (line 114) +* OFS variable <1>: User-modified. (line 113) * OFS variable <2>: Output Separators. (line 6) * OFS variable: Changing Fields. (line 64) * OpenBSD: Glossary. (line 611) @@ -33147,7 +33192,7 @@ Index * operators, precedence: Increment Ops. (line 60) * operators, relational, See operators, comparison: Typing and Comparison. (line 9) -* operators, short-circuit: Boolean Ops. (line 57) +* operators, short-circuit: Boolean Ops. (line 59) * operators, string: Concatenation. (line 8) * operators, string-matching: Regexp Usage. (line 19) * operators, string-matching, for buffers: GNU Regexp Operators. @@ -33163,14 +33208,14 @@ Index * options, long <1>: Options. (line 6) * options, long: Command Line. (line 13) * options, printing list of: Options. (line 154) -* or: Bitwise Functions. (line 49) +* or: Bitwise Functions. (line 50) * OR bitwise operation: Bitwise Functions. (line 6) * or Boolean-logic operator: Boolean Ops. (line 6) * ord() extension function: Extension Sample Ord. (line 12) * ord() user-defined function: Ordinal Functions. (line 16) * order of evaluation, concatenation: Concatenation. (line 41) -* ORS variable <1>: User-modified. (line 119) +* ORS variable <1>: User-modified. (line 118) * ORS variable: Output Separators. (line 20) * output field separator, See OFS variable: Changing Fields. (line 64) * output record separator, See ORS variable: Output Separators. @@ -33194,7 +33239,7 @@ Index * parentheses (), in a profile: Profiling. (line 146) * parentheses (), regexp operator: Regexp Operators. (line 81) * password file: Passwd Functions. (line 16) -* patsplit: String Functions. (line 294) +* patsplit: String Functions. (line 296) * patterns: Patterns and Actions. (line 6) * patterns, comparison expressions as: Expression Patterns. (line 14) @@ -33250,15 +33295,15 @@ Index * portability, gawk: New Ports. (line 6) * portability, gettext library and: Explaining gettext. (line 11) * portability, internationalization and: I18N Portability. (line 6) -* portability, length() function: String Functions. (line 176) +* portability, length() function: String Functions. (line 179) * portability, new awk vs. old awk: Strings And Numbers. (line 57) * portability, next statement in user-defined functions: Pass By Value/Reference. (line 91) * portability, NF variable, decrementing: Changing Fields. (line 115) * portability, operators: Increment Ops. (line 60) * portability, operators, not in POSIX awk: Precedence. (line 98) -* portability, POSIXLY_CORRECT environment variable: Options. (line 356) -* portability, substr() function: String Functions. (line 510) +* portability, POSIXLY_CORRECT environment variable: Options. (line 359) +* portability, substr() function: String Functions. (line 511) * portable object files <1>: Translator i18n. (line 6) * portable object files: Explaining gettext. (line 37) * portable object files, converting to message object files: I18N Example. @@ -33294,7 +33339,7 @@ Index * POSIX awk, FS variable and: User-modified. (line 60) * POSIX awk, function keyword in: Definition Syntax. (line 93) * POSIX awk, functions and, gsub()/sub(): Gory Details. (line 90) -* POSIX awk, functions and, length(): String Functions. (line 176) +* POSIX awk, functions and, length(): String Functions. (line 179) * POSIX awk, GNU long options and: Options. (line 15) * POSIX awk, interval expressions in: Regexp Operators. (line 135) * POSIX awk, next/nextfile statements and: Next Statement. (line 44) @@ -33302,16 +33347,16 @@ Index * POSIX awk, OFMT variable and <1>: Strings And Numbers. (line 57) * POSIX awk, OFMT variable and: OFMT. (line 27) * POSIX awk, period (.), using: Regexp Operators. (line 51) -* POSIX awk, printf format strings and: Format Modifiers. (line 159) +* POSIX awk, printf format strings and: Format Modifiers. (line 158) * POSIX awk, regular expressions and: Regexp Operators. (line 161) * POSIX awk, timestamps and: Time Functions. (line 6) * POSIX awk, | I/O operator and: Getline/Pipe. (line 55) -* POSIX mode: Options. (line 252) +* POSIX mode: Options. (line 254) * POSIX, awk and: Preface. (line 21) * POSIX, gawk extensions not included in: POSIX/GNU. (line 6) * POSIX, programs, implementing in awk: Clones. (line 6) -* POSIXLY_CORRECT environment variable: Options. (line 336) -* PREC variable: User-modified. (line 124) +* POSIXLY_CORRECT environment variable: Options. (line 339) +* PREC variable: User-modified. (line 123) * precedence <1>: Precedence. (line 6) * precedence: Increment Ops. (line 60) * precedence, regexp operators: Regexp Operators. (line 156) @@ -33322,7 +33367,7 @@ Index * print statement, commas, omitting: Print Examples. (line 31) * print statement, I/O operators in: Precedence. (line 71) * print statement, line continuations and: Print Examples. (line 76) -* print statement, OFMT variable and: User-modified. (line 114) +* print statement, OFMT variable and: User-modified. (line 113) * print statement, See Also redirection, of output: Redirection. (line 17) * print statement, sprintf() function and: Round Function. (line 6) @@ -33364,7 +33409,7 @@ Index * PROCINFO array, and group membership: Group Functions. (line 6) * PROCINFO array, and user and group ID numbers: Id Program. (line 15) * PROCINFO array, testing the field splitting: Passwd Functions. - (line 161) + (line 154) * PROCINFO array, uses: Auto-set. (line 249) * PROCINFO, values of sorted_in: Controlling Scanning. (line 26) @@ -33373,7 +33418,7 @@ Index * program identifiers: Auto-set. (line 155) * program, definition of: Getting Started. (line 21) * programming conventions, --non-decimal-data option: Nondecimal Data. - (line 36) + (line 35) * programming conventions, ARGC/ARGV variables: Auto-set. (line 35) * programming conventions, exit statement: Exit Statement. (line 38) * programming conventions, function parameters: Return Statement. @@ -33407,7 +33452,7 @@ Index (line 99) * QUIT signal (MS-Windows): Profiling. (line 214) * quoting in gawk command lines: Long. (line 26) -* quoting in gawk command lines, tricks for: Quoting. (line 88) +* quoting in gawk command lines, tricks for: Quoting. (line 91) * quoting, for small awk programs: Comments. (line 27) * r debugger command (alias for run): Debugger Execution Control. (line 62) @@ -33438,19 +33483,19 @@ Index * readfile() user-defined function: Readfile Function. (line 30) * reading input files: Reading Files. (line 6) * recipe for a programming language: History. (line 6) -* record separators <1>: User-modified. (line 133) +* record separators <1>: User-modified. (line 132) * record separators: awk split records. (line 6) * record separators, changing: awk split records. (line 85) * record separators, regular expressions as: awk split records. - (line 124) + (line 125) * record separators, with multiline records: Multiple Line. (line 10) * records <1>: Basic High Level. (line 73) * records: Reading Files. (line 14) * records, multiline: Multiple Line. (line 6) * records, printing: Print. (line 22) * records, splitting input into: Records. (line 6) -* records, terminating: awk split records. (line 124) -* records, treating files as: gawk split records. (line 92) +* records, terminating: awk split records. (line 125) +* records, treating files as: gawk split records. (line 93) * recursive functions: Definition Syntax. (line 83) * redirect gawk output, in debugger: Debugger Info. (line 72) * redirection of input: Getline/File. (line 6) @@ -33459,7 +33504,7 @@ Index (line 77) * regexp: Regexp. (line 6) * regexp constants <1>: Comparison Operators. - (line 102) + (line 103) * regexp constants <2>: Regexp Constants. (line 6) * regexp constants: Regexp Usage. (line 57) * regexp constants, /=.../, /= operator and: Assignment Ops. (line 148) @@ -33478,7 +33523,7 @@ Index * regular expressions, as patterns <1>: Regexp Patterns. (line 6) * regular expressions, as patterns: Regexp Usage. (line 6) * regular expressions, as record separators: awk split records. - (line 124) + (line 125) * regular expressions, case sensitivity <1>: User-modified. (line 76) * regular expressions, case sensitivity: Case-sensitivity. (line 6) * regular expressions, computed: Computed Regexps. (line 6) @@ -33489,7 +33534,7 @@ Index (line 59) * regular expressions, gawk, command-line options: GNU Regexp Operators. (line 70) -* regular expressions, interval expressions and: Options. (line 277) +* regular expressions, interval expressions and: Options. (line 279) * regular expressions, leftmost longest match: Leftmost Longest. (line 6) * regular expressions, operators <1>: Regexp Operators. (line 6) @@ -33505,12 +33550,12 @@ Index * regular expressions, searching for: Egrep Program. (line 6) * relational operators, See comparison operators: Typing and Comparison. (line 9) -* replace in string: String Functions. (line 406) +* replace in string: String Functions. (line 407) * return debugger command: Debugger Execution Control. (line 54) * return statement, user-defined functions: Return Statement. (line 6) * return value, close() function: Close Files And Pipes. - (line 131) + (line 132) * rev() user-defined function: Function Example. (line 54) * revoutput extension: Extension Sample Revout. (line 11) @@ -33526,11 +33571,11 @@ Index (line 11) * right angle bracket (>), >> operator (I/O) <1>: Precedence. (line 65) * right angle bracket (>), >> operator (I/O): Redirection. (line 50) -* right shift: Bitwise Functions. (line 52) +* right shift: Bitwise Functions. (line 53) * right shift, bitwise: Bitwise Functions. (line 32) * Ritchie, Dennis: Basic Data Typing. (line 54) * RLENGTH variable: Auto-set. (line 259) -* RLENGTH variable, match() function and: String Functions. (line 224) +* RLENGTH variable, match() function and: String Functions. (line 227) * Robbins, Arnold <1>: Future Extensions. (line 6) * Robbins, Arnold <2>: Bugs. (line 32) * Robbins, Arnold <3>: Contributors. (line 141) @@ -33539,7 +33584,7 @@ Index * Robbins, Arnold <6>: Passwd Functions. (line 90) * Robbins, Arnold <7>: Getline/Pipe. (line 39) * Robbins, Arnold: Command Line Field Separator. - (line 74) + (line 71) * Robbins, Bill: Getline/Pipe. (line 39) * Robbins, Harry: Acknowledgments. (line 92) * Robbins, Jean: Acknowledgments. (line 92) @@ -33550,16 +33595,16 @@ Index * round to nearest integer: Numeric Functions. (line 38) * round() user-defined function: Round Function. (line 16) * rounding numbers: Round Function. (line 6) -* ROUNDMODE variable: User-modified. (line 128) -* RS variable <1>: User-modified. (line 133) +* ROUNDMODE variable: User-modified. (line 127) +* RS variable <1>: User-modified. (line 132) * RS variable: awk split records. (line 12) * RS variable, multiline records and: Multiple Line. (line 17) -* rshift: Bitwise Functions. (line 52) +* rshift: Bitwise Functions. (line 53) * RSTART variable: Auto-set. (line 265) -* RSTART variable, match() function and: String Functions. (line 224) +* RSTART variable, match() function and: String Functions. (line 227) * RT variable <1>: Auto-set. (line 272) * RT variable <2>: Multiple Line. (line 129) -* RT variable: awk split records. (line 124) +* RT variable: awk split records. (line 125) * Rubin, Paul <1>: Contributors. (line 15) * Rubin, Paul: History. (line 30) * rule, definition of: Getting Started. (line 21) @@ -33570,7 +33615,7 @@ Index (line 68) * sample debugging session: Sample Debugging Session. (line 6) -* sandbox mode: Options. (line 284) +* sandbox mode: Options. (line 286) * save debugger options: Debugger Info. (line 84) * scalar or array: Type Functions. (line 11) * scalar values: Basic Data Typing. (line 13) @@ -33609,12 +33654,12 @@ Index * separators, field, FIELDWIDTHS variable and: User-modified. (line 37) * separators, field, FPAT variable and: User-modified. (line 43) * separators, field, POSIX and: Fields. (line 6) -* separators, for records <1>: User-modified. (line 133) +* separators, for records <1>: User-modified. (line 132) * separators, for records: awk split records. (line 6) * separators, for records, regular expressions as: awk split records. - (line 124) + (line 125) * separators, for statements in actions: Action Overview. (line 19) -* separators, subscript: User-modified. (line 146) +* separators, subscript: User-modified. (line 145) * set breakpoint: Breakpoint Control. (line 11) * set debugger command: Viewing And Changing Data. (line 59) @@ -33623,7 +33668,7 @@ Index (line 67) * shadowing of variable values: Definition Syntax. (line 71) * shell quoting, rules for: Quoting. (line 6) -* shells, piping commands into: Redirection. (line 142) +* shells, piping commands into: Redirection. (line 136) * shells, quoting: Using Shell Variables. (line 12) * shells, quoting, rules for: Quoting. (line 18) @@ -33632,7 +33677,7 @@ Index * shells, variables: Using Shell Variables. (line 6) * shift, bitwise: Bitwise Functions. (line 32) -* short-circuit operators: Boolean Ops. (line 57) +* short-circuit operators: Boolean Ops. (line 59) * show all source files, in debugger: Debugger Info. (line 45) * show breakpoints: Debugger Info. (line 21) * show function arguments, in debugger: Debugger Info. (line 18) @@ -33663,22 +33708,22 @@ Index (line 38) * sidebar, Changing NR and FNR: Auto-set. (line 314) * sidebar, Controlling Output Buffering with system(): I/O Functions. - (line 138) + (line 137) * sidebar, Escape Sequences for Metacharacters: Escape Sequences. (line 136) * sidebar, FS and IGNORECASE: Field Splitting Summary. (line 64) * sidebar, Interactive Versus Noninteractive Buffering: I/O Functions. - (line 107) -* sidebar, Matching the Null String: Gory Details. (line 141) + (line 106) +* sidebar, Matching the Null String: String Functions. (line 533) * sidebar, Operator Evaluation Order: Increment Ops. (line 58) -* sidebar, Piping into sh: Redirection. (line 140) +* sidebar, Piping into sh: Redirection. (line 134) * sidebar, Pre-POSIX awk Used OFMT For String Conversion: Strings And Numbers. (line 55) * sidebar, Recipe For A Programming Language: History. (line 6) * sidebar, RS = "\0" Is Not Portable: gawk split records. (line 63) * sidebar, So Why Does gawk have BEGINFILE and ENDFILE?: Filetrans Function. - (line 83) + (line 82) * sidebar, Syntactic Ambiguities Between /= and Regular Expressions: Assignment Ops. (line 146) * sidebar, Understanding #!: Executable Scripts. (line 31) @@ -33686,7 +33731,7 @@ Index * sidebar, Using \n in Bracket Expressions of Dynamic Regexps: Computed Regexps. (line 57) * sidebar, Using close()'s Return Value: Close Files And Pipes. - (line 129) + (line 130) * SIGHUP signal, for dynamic profiling: Profiling. (line 211) * SIGINT signal (MS-Windows): Profiling. (line 214) * signals, HUP/SIGHUP, for profiling: Profiling. (line 211) @@ -33701,10 +33746,10 @@ Index * sin: Numeric Functions. (line 91) * sine: Numeric Functions. (line 91) * single quote ('): One-shot. (line 15) -* single quote (') in gawk command lines: Long. (line 33) +* single quote (') in gawk command lines: Long. (line 35) * single quote ('), in shell commands: Quoting. (line 48) * single quote ('), vs. apostrophe: Comments. (line 27) -* single quote ('), with double quotes: Quoting. (line 70) +* single quote ('), with double quotes: Quoting. (line 73) * single-character fields: Single Character Fields. (line 6) * single-step execution, in the debugger: Debugger Execution Control. @@ -33714,8 +33759,8 @@ Index * sleep() extension function: Extension Sample Time. (line 22) * Solaris, POSIX-compliant awk: Other Versions. (line 96) -* sort array: String Functions. (line 42) -* sort array indices: String Functions. (line 42) +* sort array: String Functions. (line 41) +* sort array indices: String Functions. (line 41) * sort function, arrays, sorting: Array Sorting Functions. (line 6) * sort utility: Word Sorting. (line 50) @@ -33739,14 +33784,14 @@ Index * source files, search path for: Programs Exercises. (line 70) * sparse arrays: Array Intro. (line 72) * Spencer, Henry: Glossary. (line 11) -* split: String Functions. (line 313) -* split string into array: String Functions. (line 294) +* split: String Functions. (line 315) +* split string into array: String Functions. (line 296) * split utility: Split Program. (line 6) * split() function, array elements, deleting: Delete. (line 61) * split.awk program: Split Program. (line 30) -* sprintf <1>: String Functions. (line 381) +* sprintf <1>: String Functions. (line 382) * sprintf: OFMT. (line 15) -* sprintf() function, OFMT variable and: User-modified. (line 114) +* sprintf() function, OFMT variable and: User-modified. (line 113) * sprintf() function, print/printf statements and: Round Function. (line 6) * sqrt: Numeric Functions. (line 94) @@ -33782,18 +33827,18 @@ Index * string constants, vs. regexp constants: Computed Regexps. (line 39) * string extraction (internationalization): String Extraction. (line 6) -* string length: String Functions. (line 167) +* string length: String Functions. (line 170) * string operators: Concatenation. (line 8) -* string, regular expression match: String Functions. (line 207) +* string, regular expression match: String Functions. (line 210) * string-manipulation functions: String Functions. (line 6) * string-matching operators: Regexp Usage. (line 19) * string-translation functions: I18N Functions. (line 6) -* strings splitting, example: String Functions. (line 333) -* strings, converting <1>: Bitwise Functions. (line 109) +* strings splitting, example: String Functions. (line 334) +* strings, converting <1>: Bitwise Functions. (line 110) * strings, converting: Strings And Numbers. (line 6) -* strings, converting letter case: String Functions. (line 520) +* strings, converting letter case: String Functions. (line 521) * strings, converting, numbers to: User-modified. (line 30) -* strings, empty, See null strings: awk split records. (line 114) +* strings, empty, See null strings: awk split records. (line 115) * strings, extracting: String Extraction. (line 6) * strings, for localization: Programmer i18n. (line 14) * strings, length limitations: Scalar Constants. (line 20) @@ -33801,15 +33846,15 @@ Index * strings, null: Regexp Field Splitting. (line 43) * strings, numeric: Variable Typing. (line 6) -* strtonum: String Functions. (line 388) +* strtonum: String Functions. (line 389) * strtonum() function (gawk), --non-decimal-data option and: Nondecimal Data. - (line 36) -* sub <1>: String Functions. (line 406) + (line 35) +* sub <1>: String Functions. (line 407) * sub: Using Constant Regexps. (line 43) -* sub() function, arguments of: String Functions. (line 460) +* sub() function, arguments of: String Functions. (line 461) * sub() function, escape processing: Gory Details. (line 6) -* subscript separators: User-modified. (line 146) +* subscript separators: User-modified. (line 145) * subscripts in arrays, multidimensional: Multidimensional. (line 10) * subscripts in arrays, multidimensional, scanning: Multiscanning. (line 11) @@ -33817,30 +33862,30 @@ Index (line 6) * subscripts in arrays, uninitialized variables as: Uninitialized Subscripts. (line 6) -* SUBSEP variable: User-modified. (line 146) +* SUBSEP variable: User-modified. (line 145) * SUBSEP variable, and multidimensional arrays: Multidimensional. (line 16) * substitute in string: String Functions. (line 89) -* substr: String Functions. (line 479) -* substring: String Functions. (line 479) +* substr: String Functions. (line 480) +* substring: String Functions. (line 480) * Sumner, Andrew: Other Versions. (line 64) * supplementary groups of gawk process: Auto-set. (line 244) * switch statement: Switch Statement. (line 6) * SYMTAB array: Auto-set. (line 276) * syntactic ambiguity: /= operator vs. /=.../ regexp constant: Assignment Ops. (line 148) -* system: I/O Functions. (line 75) +* system: I/O Functions. (line 74) * systime: Time Functions. (line 66) * t debugger command (alias for tbreak): Breakpoint Control. (line 90) * tbreak debugger command: Breakpoint Control. (line 90) -* Tcl: Library Names. (line 57) +* Tcl: Library Names. (line 58) * TCP/IP: TCP/IP Networking. (line 6) * TCP/IP, support for: Special Network. (line 6) * tee utility: Tee Program. (line 6) * tee.awk program: Tee Program. (line 26) * temporary breakpoint: Breakpoint Control. (line 90) -* terminating records: awk split records. (line 124) -* testbits.awk program: Bitwise Functions. (line 70) +* terminating records: awk split records. (line 125) +* testbits.awk program: Bitwise Functions. (line 71) * testext extension: Extension Sample API Tests. (line 6) * Texinfo <1>: Adding Code. (line 100) @@ -33856,7 +33901,7 @@ Index * text, printing: Print. (line 22) * text, printing, unduplicated lines of: Uniq Program. (line 6) * TEXTDOMAIN variable <1>: Programmer i18n. (line 9) -* TEXTDOMAIN variable: User-modified. (line 152) +* TEXTDOMAIN variable: User-modified. (line 151) * TEXTDOMAIN variable, BEGIN pattern and: Programmer i18n. (line 60) * TEXTDOMAIN variable, portability and: I18N Portability. (line 20) * textdomain() function (C library): Explaining gettext. (line 28) @@ -33879,15 +33924,15 @@ Index * timestamps, converting dates to: Time Functions. (line 76) * timestamps, formatted: Getlocaltime Function. (line 6) -* tolower: String Functions. (line 521) -* toupper: String Functions. (line 527) +* tolower: String Functions. (line 522) +* toupper: String Functions. (line 528) * tr utility: Translate Program. (line 6) * trace debugger command: Miscellaneous Debugger Commands. (line 108) * traceback, display in debugger: Execution Stack. (line 13) * translate string: I18N Functions. (line 22) * translate.awk program: Translate Program. (line 55) -* treating files, as single records: gawk split records. (line 92) +* treating files, as single records: gawk split records. (line 93) * troubleshooting, --non-decimal-data option: Options. (line 211) * troubleshooting, == operator: Comparison Operators. (line 37) @@ -33898,26 +33943,26 @@ Index * troubleshooting, fatal errors, field widths, specifying: Constant Size. (line 23) * troubleshooting, fatal errors, printf format strings: Format Modifiers. - (line 159) -* troubleshooting, fflush() function: I/O Functions. (line 63) + (line 158) +* troubleshooting, fflush() function: I/O Functions. (line 62) * troubleshooting, function call syntax: Function Calls. (line 30) * troubleshooting, gawk: Compatibility Mode. (line 6) * troubleshooting, gawk, bug reports: Bugs. (line 9) * troubleshooting, gawk, fatal errors, function arguments: Calling Built-in. (line 16) * troubleshooting, getline function: File Checking. (line 25) -* troubleshooting, gsub()/sub() functions: String Functions. (line 470) -* troubleshooting, match() function: String Functions. (line 289) +* troubleshooting, gsub()/sub() functions: String Functions. (line 471) +* troubleshooting, match() function: String Functions. (line 291) * troubleshooting, print statement, omitting commas: Print Examples. (line 31) -* troubleshooting, printing: Redirection. (line 118) -* troubleshooting, quotes with file names: Special FD. (line 68) +* troubleshooting, printing: Redirection. (line 112) +* troubleshooting, quotes with file names: Special FD. (line 62) * troubleshooting, readable data files: File Checking. (line 6) * troubleshooting, regexp constants vs. string constants: Computed Regexps. (line 39) * troubleshooting, string concatenation: Concatenation. (line 26) -* troubleshooting, substr() function: String Functions. (line 497) -* troubleshooting, system() function: I/O Functions. (line 97) +* troubleshooting, substr() function: String Functions. (line 498) +* troubleshooting, system() function: I/O Functions. (line 96) * troubleshooting, typographical errors, global variables: Options. (line 98) * true, logical: Truth Values. (line 6) @@ -33951,9 +33996,9 @@ Index * Unix awk, backslashes in escape sequences: Escape Sequences. (line 132) * Unix awk, close() function and: Close Files And Pipes. - (line 131) + (line 132) * Unix awk, password files, field separators and: Command Line Field Separator. - (line 65) + (line 62) * Unix, awk scripts and: Executable Scripts. (line 6) * UNIXROOT variable, on OS/2 systems: PC Using. (line 16) * unsigned integers: Computer Arithmetic. (line 41) @@ -33972,7 +34017,7 @@ Index * USR1 signal, for dynamic profiling: Profiling. (line 188) * values, numeric: Basic Data Typing. (line 13) * values, string: Basic Data Typing. (line 13) -* variable assignments and input files: Other Arguments. (line 23) +* variable assignments and input files: Other Arguments. (line 26) * variable typing: Typing and Comparison. (line 9) * variables <1>: Basic Data Typing. (line 6) @@ -33982,7 +34027,7 @@ Index * variables, built-in: Using Variables. (line 23) * variables, built-in, -v option, setting with: Options. (line 40) * variables, built-in, conveying information: Auto-set. (line 6) -* variables, flag: Boolean Ops. (line 67) +* variables, flag: Boolean Ops. (line 69) * variables, getline command into, using <1>: Getline/Variable/Coprocess. (line 6) * variables, getline command into, using <2>: Getline/Variable/Pipe. @@ -33994,7 +34039,6 @@ Index * variables, global, printing list of: Options. (line 93) * variables, initializing: Using Variables. (line 23) * variables, local to a function: Variable Scope. (line 6) -* variables, names of: Arrays. (line 18) * variables, private: Library Names. (line 11) * variables, setting: Options. (line 32) * variables, shadowing: Definition Syntax. (line 71) @@ -34015,7 +34059,7 @@ Index * vertical bar (|), |& operator (I/O) <2>: Precedence. (line 65) * vertical bar (|), |& operator (I/O): Getline/Coprocess. (line 6) * vertical bar (|), || operator <1>: Precedence. (line 89) -* vertical bar (|), || operator: Boolean Ops. (line 57) +* vertical bar (|), || operator: Boolean Ops. (line 59) * Vinschen, Corinna: Acknowledgments. (line 60) * w debugger command (alias for watch): Viewing And Changing Data. (line 67) @@ -34041,7 +34085,7 @@ Index * whitespace, as field separators: Default Field Splitting. (line 6) * whitespace, functions, calling: Calling Built-in. (line 10) -* whitespace, newlines as: Options. (line 258) +* whitespace, newlines as: Options. (line 260) * Williams, Kent: Contributors. (line 34) * Woehlke, Matthew: Contributors. (line 79) * Woods, John: Contributors. (line 27) @@ -34058,7 +34102,7 @@ Index * writea() extension function: Extension Sample Read write array. (line 9) * xgettext utility: String Extraction. (line 13) -* xor: Bitwise Functions. (line 55) +* xor: Bitwise Functions. (line 56) * XOR bitwise operation: Bitwise Functions. (line 6) * Yawitz, Efraim: Contributors. (line 131) * Zaretskii, Eli <1>: Bugs. (line 71) @@ -34075,12 +34119,12 @@ Index * | (vertical bar), | operator (I/O): Getline/Pipe. (line 9) * | (vertical bar), |& operator (I/O) <1>: Two-way I/O. (line 25) * | (vertical bar), |& operator (I/O) <2>: Precedence. (line 65) -* | (vertical bar), |& operator (I/O) <3>: Redirection. (line 102) +* | (vertical bar), |& operator (I/O) <3>: Redirection. (line 96) * | (vertical bar), |& operator (I/O): Getline/Coprocess. (line 6) * | (vertical bar), |& operator (I/O), pipes, closing: Close Files And Pipes. - (line 119) + (line 120) * | (vertical bar), || operator <1>: Precedence. (line 89) -* | (vertical bar), || operator: Boolean Ops. (line 57) +* | (vertical bar), || operator: Boolean Ops. (line 59) * ~ (tilde), ~ operator <1>: Expression Patterns. (line 24) * ~ (tilde), ~ operator <2>: Precedence. (line 80) * ~ (tilde), ~ operator <3>: Comparison Operators. @@ -34094,553 +34138,556 @@ Index Tag Table: Node: Top1204 -Node: Foreword41858 -Node: Preface46203 -Ref: Preface-Footnote-149226 -Ref: Preface-Footnote-249333 -Node: History49565 -Node: Names51939 -Ref: Names-Footnote-153033 -Node: This Manual53179 -Ref: This Manual-Footnote-158958 -Node: Conventions59058 -Node: Manual History61403 -Ref: Manual History-Footnote-164479 -Ref: Manual History-Footnote-264520 -Node: How To Contribute64594 -Node: Acknowledgments65833 -Node: Getting Started70581 -Node: Running gawk73015 -Node: One-shot74205 -Node: Read Terminal75430 -Node: Long77455 -Node: Executable Scripts78849 -Ref: Executable Scripts-Footnote-181650 -Node: Comments81752 -Node: Quoting84225 -Node: DOS Quoting89538 -Node: Sample Data Files90213 -Node: Very Simple92820 -Node: Two Rules97705 -Node: More Complex99599 -Ref: More Complex-Footnote-1102513 -Node: Statements/Lines102598 -Ref: Statements/Lines-Footnote-1107054 -Node: Other Features107319 -Node: When108250 -Ref: When-Footnote-1110006 -Node: Intro Summary110071 -Node: Invoking Gawk110954 -Node: Command Line112469 -Node: Options113260 -Ref: Options-Footnote-1128907 -Node: Other Arguments128932 -Node: Naming Standard Input131760 -Node: Environment Variables132853 -Node: AWKPATH Variable133411 -Ref: AWKPATH Variable-Footnote-1136277 -Ref: AWKPATH Variable-Footnote-2136322 -Node: AWKLIBPATH Variable136582 -Node: Other Environment Variables137341 -Node: Exit Status140793 -Node: Include Files141468 -Node: Loading Shared Libraries145046 -Node: Obsolete146430 -Node: Undocumented147127 -Node: Invoking Summary147394 -Node: Regexp148994 -Node: Regexp Usage150453 -Node: Escape Sequences152486 -Node: Regexp Operators158557 -Ref: Regexp Operators-Footnote-1165988 -Ref: Regexp Operators-Footnote-2166135 -Node: Bracket Expressions166233 -Ref: table-char-classes168251 -Node: Leftmost Longest171191 -Node: Computed Regexps172395 -Node: GNU Regexp Operators175773 -Node: Case-sensitivity179479 -Ref: Case-sensitivity-Footnote-1182369 -Ref: Case-sensitivity-Footnote-2182604 -Node: Regexp Summary182712 -Node: Reading Files184181 -Node: Records186273 -Node: awk split records186995 -Node: gawk split records191853 -Ref: gawk split records-Footnote-1196374 -Node: Fields196411 -Ref: Fields-Footnote-1199375 -Node: Nonconstant Fields199461 -Ref: Nonconstant Fields-Footnote-1201691 -Node: Changing Fields201893 -Node: Field Separators207847 -Node: Default Field Splitting210549 -Node: Regexp Field Splitting211666 -Node: Single Character Fields214993 -Node: Command Line Field Separator216052 -Node: Full Line Fields219478 -Ref: Full Line Fields-Footnote-1219986 -Node: Field Splitting Summary220032 -Ref: Field Splitting Summary-Footnote-1223164 -Node: Constant Size223265 -Node: Splitting By Content227871 -Ref: Splitting By Content-Footnote-1231944 -Node: Multiple Line231984 -Ref: Multiple Line-Footnote-1237840 -Node: Getline238019 -Node: Plain Getline240230 -Node: Getline/Variable242936 -Node: Getline/File244083 -Node: Getline/Variable/File245467 -Ref: Getline/Variable/File-Footnote-1247066 -Node: Getline/Pipe247153 -Node: Getline/Variable/Pipe249839 -Node: Getline/Coprocess250946 -Node: Getline/Variable/Coprocess252198 -Node: Getline Notes252935 -Node: Getline Summary255739 -Ref: table-getline-variants256147 -Node: Read Timeout257059 -Ref: Read Timeout-Footnote-1260886 -Node: Command-line directories260944 -Node: Input Summary261848 -Node: Input Exercises264985 -Node: Printing265713 -Node: Print267435 -Node: Print Examples268928 -Node: Output Separators271707 -Node: OFMT273723 -Node: Printf275081 -Node: Basic Printf275987 -Node: Control Letters277526 -Node: Format Modifiers281517 -Node: Printf Examples287544 -Node: Redirection290008 -Node: Special Files296980 -Node: Special FD297513 -Ref: Special FD-Footnote-1301110 -Node: Special Network301184 -Node: Special Caveats302034 -Node: Close Files And Pipes302830 -Ref: Close Files And Pipes-Footnote-1309991 -Ref: Close Files And Pipes-Footnote-2310139 -Node: Output Summary310289 -Node: Output Exercises311286 -Node: Expressions311966 -Node: Values313151 -Node: Constants313827 -Node: Scalar Constants314507 -Ref: Scalar Constants-Footnote-1315366 -Node: Nondecimal-numbers315616 -Node: Regexp Constants318616 -Node: Using Constant Regexps319141 -Node: Variables322213 -Node: Using Variables322868 -Node: Assignment Options324774 -Node: Conversion326649 -Node: Strings And Numbers327173 -Ref: Strings And Numbers-Footnote-1330235 -Node: Locale influences conversions330344 -Ref: table-locale-affects333061 -Node: All Operators333649 -Node: Arithmetic Ops334279 -Node: Concatenation336784 -Ref: Concatenation-Footnote-1339603 -Node: Assignment Ops339709 -Ref: table-assign-ops344692 -Node: Increment Ops345995 -Node: Truth Values and Conditions349433 -Node: Truth Values350516 -Node: Typing and Comparison351565 -Node: Variable Typing352358 -Node: Comparison Operators356010 -Ref: table-relational-ops356420 -Node: POSIX String Comparison359970 -Ref: POSIX String Comparison-Footnote-1361054 -Node: Boolean Ops361192 -Ref: Boolean Ops-Footnote-1365531 -Node: Conditional Exp365622 -Node: Function Calls367349 -Node: Precedence371229 -Node: Locales374898 -Node: Expressions Summary376529 -Node: Patterns and Actions379070 -Node: Pattern Overview380186 -Node: Regexp Patterns381863 -Node: Expression Patterns382406 -Node: Ranges386186 -Node: BEGIN/END389292 -Node: Using BEGIN/END390054 -Ref: Using BEGIN/END-Footnote-1392790 -Node: I/O And BEGIN/END392896 -Node: BEGINFILE/ENDFILE395167 -Node: Empty398098 -Node: Using Shell Variables398415 -Node: Action Overview400698 -Node: Statements403025 -Node: If Statement404873 -Node: While Statement406371 -Node: Do Statement408415 -Node: For Statement409571 -Node: Switch Statement412723 -Node: Break Statement415111 -Node: Continue Statement417152 -Node: Next Statement418977 -Node: Nextfile Statement421347 -Node: Exit Statement424004 -Node: Built-in Variables426408 -Node: User-modified427535 -Ref: User-modified-Footnote-1435224 -Node: Auto-set435286 -Ref: Auto-set-Footnote-1448475 -Ref: Auto-set-Footnote-2448680 -Node: ARGC and ARGV448736 -Node: Pattern Action Summary452640 -Node: Arrays454863 -Node: Array Basics456412 -Node: Array Intro457238 -Ref: figure-array-elements459211 -Ref: Array Intro-Footnote-1461735 -Node: Reference to Elements461863 -Node: Assigning Elements464313 -Node: Array Example464804 -Node: Scanning an Array466536 -Node: Controlling Scanning469537 -Ref: Controlling Scanning-Footnote-1474710 -Node: Delete475026 -Ref: Delete-Footnote-1477777 -Node: Numeric Array Subscripts477834 -Node: Uninitialized Subscripts480017 -Node: Multidimensional481644 -Node: Multiscanning484757 -Node: Arrays of Arrays486346 -Node: Arrays Summary491009 -Node: Functions493114 -Node: Built-in493987 -Node: Calling Built-in495065 -Node: Numeric Functions497053 -Ref: Numeric Functions-Footnote-1501889 -Ref: Numeric Functions-Footnote-2502246 -Ref: Numeric Functions-Footnote-3502294 -Node: String Functions502563 -Ref: String Functions-Footnote-1525560 -Ref: String Functions-Footnote-2525689 -Ref: String Functions-Footnote-3525937 -Node: Gory Details526024 -Ref: table-sub-escapes527797 -Ref: table-sub-proposed529317 -Ref: table-posix-sub530681 -Ref: table-gensub-escapes532221 -Ref: Gory Details-Footnote-1533397 -Node: I/O Functions533548 -Ref: I/O Functions-Footnote-1540658 -Node: Time Functions540805 -Ref: Time Functions-Footnote-1551269 -Ref: Time Functions-Footnote-2551337 -Ref: Time Functions-Footnote-3551495 -Ref: Time Functions-Footnote-4551606 -Ref: Time Functions-Footnote-5551718 -Ref: Time Functions-Footnote-6551945 -Node: Bitwise Functions552211 -Ref: table-bitwise-ops552773 -Ref: Bitwise Functions-Footnote-1557018 -Node: Type Functions557202 -Node: I18N Functions558344 -Node: User-defined559989 -Node: Definition Syntax560793 -Ref: Definition Syntax-Footnote-1566197 -Node: Function Example566266 -Ref: Function Example-Footnote-1568906 -Node: Function Caveats568928 -Node: Calling A Function569446 -Node: Variable Scope570401 -Node: Pass By Value/Reference573389 -Node: Return Statement576899 -Node: Dynamic Typing579883 -Node: Indirect Calls580812 -Ref: Indirect Calls-Footnote-1590528 -Node: Functions Summary590656 -Node: Library Functions593306 -Ref: Library Functions-Footnote-1596924 -Ref: Library Functions-Footnote-2597067 -Node: Library Names597238 -Ref: Library Names-Footnote-1600711 -Ref: Library Names-Footnote-2600931 -Node: General Functions601017 -Node: Strtonum Function602045 -Node: Assert Function604947 -Node: Round Function608273 -Node: Cliff Random Function609814 -Node: Ordinal Functions610830 -Ref: Ordinal Functions-Footnote-1613895 -Ref: Ordinal Functions-Footnote-2614147 -Node: Join Function614358 -Ref: Join Function-Footnote-1616129 -Node: Getlocaltime Function616329 -Node: Readfile Function620065 -Node: Data File Management621904 -Node: Filetrans Function622536 -Node: Rewind Function626605 -Node: File Checking628163 -Ref: File Checking-Footnote-1629295 -Node: Empty Files629496 -Node: Ignoring Assigns631475 -Node: Getopt Function633029 -Ref: Getopt Function-Footnote-1644293 -Node: Passwd Functions644496 -Ref: Passwd Functions-Footnote-1653475 -Node: Group Functions653563 -Ref: Group Functions-Footnote-1661494 -Node: Walking Arrays661707 -Node: Library Functions Summary663310 -Node: Library Exercises664698 -Node: Sample Programs665978 -Node: Running Examples666748 -Node: Clones667476 -Node: Cut Program668700 -Node: Egrep Program678558 -Ref: Egrep Program-Footnote-1686145 -Node: Id Program686255 -Node: Split Program689909 -Ref: Split Program-Footnote-1693447 -Node: Tee Program693575 -Node: Uniq Program696362 -Node: Wc Program703785 -Ref: Wc Program-Footnote-1708050 -Node: Miscellaneous Programs708142 -Node: Dupword Program709355 -Node: Alarm Program711386 -Node: Translate Program716190 -Ref: Translate Program-Footnote-1720763 -Ref: Translate Program-Footnote-2721033 -Node: Labels Program721172 -Ref: Labels Program-Footnote-1724533 -Node: Word Sorting724617 -Node: History Sorting728660 -Node: Extract Program730496 -Node: Simple Sed738032 -Node: Igawk Program741094 -Ref: Igawk Program-Footnote-1755398 -Ref: Igawk Program-Footnote-2755599 -Node: Anagram Program755737 -Node: Signature Program758805 -Node: Programs Summary760052 -Node: Programs Exercises761267 -Ref: Programs Exercises-Footnote-1765398 -Node: Advanced Features765489 -Node: Nondecimal Data767437 -Node: Array Sorting769014 -Node: Controlling Array Traversal769711 -Node: Array Sorting Functions777991 -Ref: Array Sorting Functions-Footnote-1781898 -Node: Two-way I/O782092 -Ref: Two-way I/O-Footnote-1787036 -Ref: Two-way I/O-Footnote-2787215 -Node: TCP/IP Networking787297 -Node: Profiling790139 -Node: Advanced Features Summary797690 -Node: Internationalization799554 -Node: I18N and L10N801034 -Node: Explaining gettext801720 -Ref: Explaining gettext-Footnote-1806746 -Ref: Explaining gettext-Footnote-2806930 -Node: Programmer i18n807095 -Ref: Programmer i18n-Footnote-1811889 -Node: Translator i18n811938 -Node: String Extraction812732 -Ref: String Extraction-Footnote-1813865 -Node: Printf Ordering813951 -Ref: Printf Ordering-Footnote-1816733 -Node: I18N Portability816797 -Ref: I18N Portability-Footnote-1819246 -Node: I18N Example819309 -Ref: I18N Example-Footnote-1822015 -Node: Gawk I18N822087 -Node: I18N Summary822725 -Node: Debugger824064 -Node: Debugging825086 -Node: Debugging Concepts825527 -Node: Debugging Terms827383 -Node: Awk Debugging829980 -Node: Sample Debugging Session830872 -Node: Debugger Invocation831392 -Node: Finding The Bug832728 -Node: List of Debugger Commands839207 -Node: Breakpoint Control840539 -Node: Debugger Execution Control844203 -Node: Viewing And Changing Data847563 -Node: Execution Stack850921 -Node: Debugger Info852434 -Node: Miscellaneous Debugger Commands856428 -Node: Readline Support861612 -Node: Limitations862504 -Node: Debugging Summary864777 -Node: Arbitrary Precision Arithmetic865945 -Node: Computer Arithmetic867432 -Ref: Computer Arithmetic-Footnote-1871819 -Node: Math Definitions871876 -Ref: table-ieee-formats875165 -Ref: Math Definitions-Footnote-1875705 -Node: MPFR features875808 -Node: FP Math Caution877425 -Ref: FP Math Caution-Footnote-1878475 -Node: Inexactness of computations878844 -Node: Inexact representation879792 -Node: Comparing FP Values881147 -Node: Errors accumulate882111 -Node: Getting Accuracy883544 -Node: Try To Round886203 -Node: Setting precision887102 -Ref: table-predefined-precision-strings887784 -Node: Setting the rounding mode889577 -Ref: table-gawk-rounding-modes889941 -Ref: Setting the rounding mode-Footnote-1893395 -Node: Arbitrary Precision Integers893574 -Ref: Arbitrary Precision Integers-Footnote-1897347 -Node: POSIX Floating Point Problems897496 -Ref: POSIX Floating Point Problems-Footnote-1901372 -Node: Floating point summary901410 -Node: Dynamic Extensions903614 -Node: Extension Intro905166 -Node: Plugin License906431 -Node: Extension Mechanism Outline907116 -Ref: figure-load-extension907540 -Ref: figure-load-new-function909025 -Ref: figure-call-new-function910027 -Node: Extension API Description912011 -Node: Extension API Functions Introduction913461 -Node: General Data Types918328 -Ref: General Data Types-Footnote-1924021 -Node: Requesting Values924320 -Ref: table-value-types-returned925057 -Node: Memory Allocation Functions926015 -Ref: Memory Allocation Functions-Footnote-1928762 -Node: Constructor Functions928858 -Node: Registration Functions930616 -Node: Extension Functions931301 -Node: Exit Callback Functions933603 -Node: Extension Version String934851 -Node: Input Parsers935501 -Node: Output Wrappers945315 -Node: Two-way processors949831 -Node: Printing Messages952035 -Ref: Printing Messages-Footnote-1953112 -Node: Updating `ERRNO'953264 -Node: Accessing Parameters954003 -Node: Symbol Table Access955233 -Node: Symbol table by name955747 -Node: Symbol table by cookie957723 -Ref: Symbol table by cookie-Footnote-1961856 -Node: Cached values961919 -Ref: Cached values-Footnote-1965423 -Node: Array Manipulation965514 -Ref: Array Manipulation-Footnote-1966612 -Node: Array Data Types966651 -Ref: Array Data Types-Footnote-1969354 -Node: Array Functions969446 -Node: Flattening Arrays973320 -Node: Creating Arrays980172 -Node: Extension API Variables984903 -Node: Extension Versioning985539 -Node: Extension API Informational Variables987440 -Node: Extension API Boilerplate988526 -Node: Finding Extensions992330 -Node: Extension Example992890 -Node: Internal File Description993620 -Node: Internal File Ops997711 -Ref: Internal File Ops-Footnote-11009143 -Node: Using Internal File Ops1009283 -Ref: Using Internal File Ops-Footnote-11011630 -Node: Extension Samples1011898 -Node: Extension Sample File Functions1013422 -Node: Extension Sample Fnmatch1020990 -Node: Extension Sample Fork1022472 -Node: Extension Sample Inplace1023685 -Node: Extension Sample Ord1025360 -Node: Extension Sample Readdir1026196 -Ref: table-readdir-file-types1027052 -Node: Extension Sample Revout1027851 -Node: Extension Sample Rev2way1028442 -Node: Extension Sample Read write array1029183 -Node: Extension Sample Readfile1031062 -Node: Extension Sample API Tests1032162 -Node: Extension Sample Time1032687 -Node: gawkextlib1034002 -Node: Extension summary1036815 -Node: Extension Exercises1040508 -Node: Language History1041230 -Node: V7/SVR3.11042873 -Node: SVR41045193 -Node: POSIX1046635 -Node: BTL1048021 -Node: POSIX/GNU1048755 -Node: Feature History1054531 -Node: Common Extensions1067622 -Node: Ranges and Locales1068934 -Ref: Ranges and Locales-Footnote-11073551 -Ref: Ranges and Locales-Footnote-21073578 -Ref: Ranges and Locales-Footnote-31073812 -Node: Contributors1074033 -Node: History summary1079458 -Node: Installation1080827 -Node: Gawk Distribution1081778 -Node: Getting1082262 -Node: Extracting1083086 -Node: Distribution contents1084728 -Node: Unix Installation1090498 -Node: Quick Installation1091115 -Node: Additional Configuration Options1093557 -Node: Configuration Philosophy1095295 -Node: Non-Unix Installation1097646 -Node: PC Installation1098104 -Node: PC Binary Installation1099415 -Node: PC Compiling1101263 -Ref: PC Compiling-Footnote-11104262 -Node: PC Testing1104367 -Node: PC Using1105543 -Node: Cygwin1109695 -Node: MSYS1110504 -Node: VMS Installation1111018 -Node: VMS Compilation1111814 -Ref: VMS Compilation-Footnote-11113036 -Node: VMS Dynamic Extensions1113094 -Node: VMS Installation Details1114467 -Node: VMS Running1116719 -Node: VMS GNV1119553 -Node: VMS Old Gawk1120276 -Node: Bugs1120746 -Node: Other Versions1124750 -Node: Installation summary1130974 -Node: Notes1132030 -Node: Compatibility Mode1132895 -Node: Additions1133677 -Node: Accessing The Source1134602 -Node: Adding Code1136038 -Node: New Ports1142216 -Node: Derived Files1146697 -Ref: Derived Files-Footnote-11152172 -Ref: Derived Files-Footnote-21152206 -Ref: Derived Files-Footnote-31152802 -Node: Future Extensions1152916 -Node: Implementation Limitations1153522 -Node: Extension Design1154770 -Node: Old Extension Problems1155924 -Ref: Old Extension Problems-Footnote-11157441 -Node: Extension New Mechanism Goals1157498 -Ref: Extension New Mechanism Goals-Footnote-11160858 -Node: Extension Other Design Decisions1161047 -Node: Extension Future Growth1163153 -Node: Old Extension Mechanism1163989 -Node: Notes summary1165751 -Node: Basic Concepts1166937 -Node: Basic High Level1167618 -Ref: figure-general-flow1167890 -Ref: figure-process-flow1168489 -Ref: Basic High Level-Footnote-11171718 -Node: Basic Data Typing1171903 -Node: Glossary1175231 -Node: Copying1200383 -Node: GNU Free Documentation License1237939 -Node: Index1263075 +Node: Foreword41978 +Node: Preface46325 +Ref: Preface-Footnote-149220 +Ref: Preface-Footnote-249327 +Ref: Preface-Footnote-349560 +Node: History49702 +Node: Names52076 +Ref: Names-Footnote-153170 +Node: This Manual53316 +Ref: This Manual-Footnote-159151 +Node: Conventions59251 +Node: Manual History61596 +Ref: Manual History-Footnote-164672 +Ref: Manual History-Footnote-264713 +Node: How To Contribute64787 +Node: Acknowledgments66026 +Node: Getting Started70774 +Node: Running gawk73208 +Node: One-shot74398 +Node: Read Terminal75623 +Node: Long77650 +Node: Executable Scripts79166 +Ref: Executable Scripts-Footnote-181955 +Node: Comments82057 +Node: Quoting84530 +Node: DOS Quoting90040 +Node: Sample Data Files90715 +Node: Very Simple93308 +Node: Two Rules98199 +Node: More Complex100085 +Node: Statements/Lines102947 +Ref: Statements/Lines-Footnote-1107403 +Node: Other Features107668 +Node: When108599 +Ref: When-Footnote-1110355 +Node: Intro Summary110420 +Node: Invoking Gawk111303 +Node: Command Line112818 +Node: Options113609 +Ref: Options-Footnote-1129375 +Node: Other Arguments129400 +Node: Naming Standard Input132361 +Node: Environment Variables133454 +Node: AWKPATH Variable134012 +Ref: AWKPATH Variable-Footnote-1136864 +Ref: AWKPATH Variable-Footnote-2136909 +Node: AWKLIBPATH Variable137169 +Node: Other Environment Variables137928 +Node: Exit Status141401 +Node: Include Files142076 +Node: Loading Shared Libraries145654 +Node: Obsolete147081 +Node: Undocumented147778 +Node: Invoking Summary148045 +Node: Regexp149711 +Node: Regexp Usage151170 +Node: Escape Sequences153203 +Node: Regexp Operators159303 +Ref: Regexp Operators-Footnote-1166738 +Ref: Regexp Operators-Footnote-2166885 +Node: Bracket Expressions166983 +Ref: table-char-classes169000 +Node: Leftmost Longest171940 +Node: Computed Regexps173242 +Node: GNU Regexp Operators176639 +Node: Case-sensitivity180345 +Ref: Case-sensitivity-Footnote-1183235 +Ref: Case-sensitivity-Footnote-2183470 +Node: Regexp Summary183578 +Node: Reading Files185047 +Node: Records187139 +Node: awk split records187867 +Node: gawk split records192779 +Ref: gawk split records-Footnote-1197318 +Node: Fields197355 +Ref: Fields-Footnote-1200151 +Node: Nonconstant Fields200237 +Ref: Nonconstant Fields-Footnote-1202467 +Node: Changing Fields202669 +Node: Field Separators208601 +Node: Default Field Splitting211303 +Node: Regexp Field Splitting212420 +Node: Single Character Fields215770 +Node: Command Line Field Separator216829 +Node: Full Line Fields220039 +Ref: Full Line Fields-Footnote-1220547 +Node: Field Splitting Summary220593 +Ref: Field Splitting Summary-Footnote-1223724 +Node: Constant Size223825 +Node: Splitting By Content228431 +Ref: Splitting By Content-Footnote-1232504 +Node: Multiple Line232544 +Ref: Multiple Line-Footnote-1238433 +Node: Getline238612 +Node: Plain Getline240823 +Node: Getline/Variable243463 +Node: Getline/File244610 +Node: Getline/Variable/File245994 +Ref: Getline/Variable/File-Footnote-1247593 +Node: Getline/Pipe247680 +Node: Getline/Variable/Pipe250363 +Node: Getline/Coprocess251492 +Node: Getline/Variable/Coprocess252744 +Node: Getline Notes253481 +Node: Getline Summary256273 +Ref: table-getline-variants256681 +Node: Read Timeout257510 +Ref: Read Timeout-Footnote-1261324 +Node: Command-line directories261382 +Node: Input Summary262286 +Node: Input Exercises265538 +Node: Printing266266 +Node: Print268043 +Node: Print Examples269500 +Node: Output Separators272279 +Node: OFMT274295 +Node: Printf275647 +Node: Basic Printf276432 +Node: Control Letters278003 +Node: Format Modifiers281987 +Node: Printf Examples287994 +Node: Redirection290476 +Node: Special FD297207 +Ref: Special FD-Footnote-1300364 +Node: Special Files300438 +Node: Other Inherited Files301054 +Node: Special Network302054 +Node: Special Caveats302915 +Node: Close Files And Pipes303866 +Ref: Close Files And Pipes-Footnote-1311043 +Ref: Close Files And Pipes-Footnote-2311191 +Node: Output Summary311341 +Node: Output Exercises312337 +Node: Expressions313017 +Node: Values314202 +Node: Constants314878 +Node: Scalar Constants315558 +Ref: Scalar Constants-Footnote-1316417 +Node: Nondecimal-numbers316667 +Node: Regexp Constants319667 +Node: Using Constant Regexps320192 +Node: Variables323330 +Node: Using Variables323985 +Node: Assignment Options325889 +Node: Conversion327764 +Node: Strings And Numbers328288 +Ref: Strings And Numbers-Footnote-1331350 +Node: Locale influences conversions331459 +Ref: table-locale-affects334174 +Node: All Operators334762 +Node: Arithmetic Ops335392 +Node: Concatenation337897 +Ref: Concatenation-Footnote-1340716 +Node: Assignment Ops340822 +Ref: table-assign-ops345805 +Node: Increment Ops347083 +Node: Truth Values and Conditions350521 +Node: Truth Values351604 +Node: Typing and Comparison352653 +Node: Variable Typing353446 +Node: Comparison Operators357098 +Ref: table-relational-ops357508 +Node: POSIX String Comparison361023 +Ref: POSIX String Comparison-Footnote-1362095 +Node: Boolean Ops362233 +Ref: Boolean Ops-Footnote-1366712 +Node: Conditional Exp366803 +Node: Function Calls368530 +Node: Precedence372410 +Node: Locales376078 +Node: Expressions Summary377709 +Node: Patterns and Actions380283 +Node: Pattern Overview381399 +Node: Regexp Patterns383078 +Node: Expression Patterns383621 +Node: Ranges387401 +Node: BEGIN/END390507 +Node: Using BEGIN/END391269 +Ref: Using BEGIN/END-Footnote-1394006 +Node: I/O And BEGIN/END394112 +Node: BEGINFILE/ENDFILE396426 +Node: Empty399327 +Node: Using Shell Variables399644 +Node: Action Overview401920 +Node: Statements404247 +Node: If Statement406095 +Node: While Statement407593 +Node: Do Statement409621 +Node: For Statement410763 +Node: Switch Statement413918 +Node: Break Statement416306 +Node: Continue Statement418347 +Node: Next Statement420172 +Node: Nextfile Statement422552 +Node: Exit Statement425182 +Node: Built-in Variables427585 +Node: User-modified428712 +Ref: User-modified-Footnote-1436392 +Node: Auto-set436454 +Ref: Auto-set-Footnote-1449648 +Ref: Auto-set-Footnote-2449853 +Node: ARGC and ARGV449909 +Node: Pattern Action Summary454113 +Node: Arrays456532 +Node: Array Basics457861 +Node: Array Intro458705 +Ref: figure-array-elements460678 +Ref: Array Intro-Footnote-1463202 +Node: Reference to Elements463330 +Node: Assigning Elements465780 +Node: Array Example466271 +Node: Scanning an Array468029 +Node: Controlling Scanning471045 +Ref: Controlling Scanning-Footnote-1476234 +Node: Numeric Array Subscripts476550 +Node: Uninitialized Subscripts478733 +Node: Delete480350 +Ref: Delete-Footnote-1483094 +Node: Multidimensional483151 +Node: Multiscanning486246 +Node: Arrays of Arrays487835 +Node: Arrays Summary492596 +Node: Functions494701 +Node: Built-in495574 +Node: Calling Built-in496652 +Node: Numeric Functions498640 +Ref: Numeric Functions-Footnote-1503464 +Ref: Numeric Functions-Footnote-2503821 +Ref: Numeric Functions-Footnote-3503869 +Node: String Functions504138 +Ref: String Functions-Footnote-1527598 +Ref: String Functions-Footnote-2527727 +Ref: String Functions-Footnote-3527975 +Node: Gory Details528062 +Ref: table-sub-escapes529843 +Ref: table-sub-proposed531363 +Ref: table-posix-sub532727 +Ref: table-gensub-escapes534267 +Ref: Gory Details-Footnote-1535099 +Node: I/O Functions535250 +Ref: I/O Functions-Footnote-1542351 +Node: Time Functions542498 +Ref: Time Functions-Footnote-1552967 +Ref: Time Functions-Footnote-2553035 +Ref: Time Functions-Footnote-3553193 +Ref: Time Functions-Footnote-4553304 +Ref: Time Functions-Footnote-5553416 +Ref: Time Functions-Footnote-6553643 +Node: Bitwise Functions553909 +Ref: table-bitwise-ops554471 +Ref: Bitwise Functions-Footnote-1558779 +Node: Type Functions558948 +Node: I18N Functions560097 +Node: User-defined561742 +Node: Definition Syntax562546 +Ref: Definition Syntax-Footnote-1567950 +Node: Function Example568019 +Ref: Function Example-Footnote-1570936 +Node: Function Caveats570958 +Node: Calling A Function571476 +Node: Variable Scope572431 +Node: Pass By Value/Reference575419 +Node: Return Statement578929 +Node: Dynamic Typing581913 +Node: Indirect Calls582842 +Ref: Indirect Calls-Footnote-1592563 +Node: Functions Summary592691 +Node: Library Functions595390 +Ref: Library Functions-Footnote-1599008 +Ref: Library Functions-Footnote-2599151 +Node: Library Names599322 +Ref: Library Names-Footnote-1602780 +Ref: Library Names-Footnote-2603000 +Node: General Functions603086 +Node: Strtonum Function604114 +Node: Assert Function607134 +Node: Round Function610458 +Node: Cliff Random Function611999 +Node: Ordinal Functions613015 +Ref: Ordinal Functions-Footnote-1616080 +Ref: Ordinal Functions-Footnote-2616332 +Node: Join Function616543 +Ref: Join Function-Footnote-1618314 +Node: Getlocaltime Function618514 +Node: Readfile Function622255 +Node: Data File Management624203 +Node: Filetrans Function624835 +Node: Rewind Function628894 +Node: File Checking630279 +Ref: File Checking-Footnote-1631607 +Node: Empty Files631808 +Node: Ignoring Assigns633787 +Node: Getopt Function635338 +Ref: Getopt Function-Footnote-1646798 +Node: Passwd Functions647001 +Ref: Passwd Functions-Footnote-1655852 +Node: Group Functions655940 +Ref: Group Functions-Footnote-1663843 +Node: Walking Arrays664056 +Node: Library Functions Summary665659 +Node: Library Exercises667060 +Node: Sample Programs668340 +Node: Running Examples669110 +Node: Clones669838 +Node: Cut Program671062 +Node: Egrep Program680792 +Ref: Egrep Program-Footnote-1688294 +Node: Id Program688404 +Node: Split Program692048 +Ref: Split Program-Footnote-1695494 +Node: Tee Program695622 +Node: Uniq Program698409 +Node: Wc Program705830 +Ref: Wc Program-Footnote-1710078 +Node: Miscellaneous Programs710170 +Node: Dupword Program711383 +Node: Alarm Program713414 +Node: Translate Program718218 +Ref: Translate Program-Footnote-1722791 +Ref: Translate Program-Footnote-2723061 +Node: Labels Program723200 +Ref: Labels Program-Footnote-1726549 +Node: Word Sorting726633 +Node: History Sorting730703 +Node: Extract Program732539 +Node: Simple Sed740071 +Node: Igawk Program743133 +Ref: Igawk Program-Footnote-1757459 +Ref: Igawk Program-Footnote-2757660 +Ref: Igawk Program-Footnote-3757782 +Node: Anagram Program757897 +Node: Signature Program760959 +Node: Programs Summary762206 +Node: Programs Exercises763399 +Ref: Programs Exercises-Footnote-1767530 +Node: Advanced Features767621 +Node: Nondecimal Data769569 +Node: Array Sorting771159 +Node: Controlling Array Traversal771856 +Ref: Controlling Array Traversal-Footnote-1780187 +Node: Array Sorting Functions780305 +Ref: Array Sorting Functions-Footnote-1784197 +Node: Two-way I/O784391 +Ref: Two-way I/O-Footnote-1789335 +Ref: Two-way I/O-Footnote-2789521 +Node: TCP/IP Networking789603 +Node: Profiling792444 +Node: Advanced Features Summary799995 +Node: Internationalization801856 +Node: I18N and L10N803336 +Node: Explaining gettext804022 +Ref: Explaining gettext-Footnote-1809048 +Ref: Explaining gettext-Footnote-2809232 +Node: Programmer i18n809397 +Ref: Programmer i18n-Footnote-1814191 +Node: Translator i18n814240 +Node: String Extraction815034 +Ref: String Extraction-Footnote-1816167 +Node: Printf Ordering816253 +Ref: Printf Ordering-Footnote-1819035 +Node: I18N Portability819099 +Ref: I18N Portability-Footnote-1821548 +Node: I18N Example821611 +Ref: I18N Example-Footnote-1824317 +Node: Gawk I18N824389 +Node: I18N Summary825027 +Node: Debugger826366 +Node: Debugging827388 +Node: Debugging Concepts827829 +Node: Debugging Terms829685 +Node: Awk Debugging832282 +Node: Sample Debugging Session833174 +Node: Debugger Invocation833694 +Node: Finding The Bug835030 +Node: List of Debugger Commands841509 +Node: Breakpoint Control842841 +Node: Debugger Execution Control846505 +Node: Viewing And Changing Data849865 +Node: Execution Stack853223 +Node: Debugger Info854736 +Node: Miscellaneous Debugger Commands858730 +Node: Readline Support863914 +Node: Limitations864806 +Node: Debugging Summary867079 +Node: Arbitrary Precision Arithmetic868247 +Node: Computer Arithmetic869734 +Ref: Computer Arithmetic-Footnote-1874121 +Node: Math Definitions874178 +Ref: table-ieee-formats877467 +Ref: Math Definitions-Footnote-1878007 +Node: MPFR features878110 +Node: FP Math Caution879727 +Ref: FP Math Caution-Footnote-1880777 +Node: Inexactness of computations881146 +Node: Inexact representation882094 +Node: Comparing FP Values883449 +Node: Errors accumulate884413 +Node: Getting Accuracy885846 +Node: Try To Round888505 +Node: Setting precision889404 +Ref: table-predefined-precision-strings890086 +Node: Setting the rounding mode891879 +Ref: table-gawk-rounding-modes892243 +Ref: Setting the rounding mode-Footnote-1895697 +Node: Arbitrary Precision Integers895876 +Ref: Arbitrary Precision Integers-Footnote-1899649 +Node: POSIX Floating Point Problems899798 +Ref: POSIX Floating Point Problems-Footnote-1903674 +Node: Floating point summary903712 +Node: Dynamic Extensions905916 +Node: Extension Intro907468 +Node: Plugin License908733 +Node: Extension Mechanism Outline909418 +Ref: figure-load-extension909842 +Ref: figure-load-new-function911327 +Ref: figure-call-new-function912329 +Node: Extension API Description914313 +Node: Extension API Functions Introduction915763 +Node: General Data Types920630 +Ref: General Data Types-Footnote-1926323 +Node: Requesting Values926622 +Ref: table-value-types-returned927359 +Node: Memory Allocation Functions928317 +Ref: Memory Allocation Functions-Footnote-1931064 +Node: Constructor Functions931160 +Node: Registration Functions932918 +Node: Extension Functions933603 +Node: Exit Callback Functions935905 +Node: Extension Version String937153 +Node: Input Parsers937803 +Node: Output Wrappers947617 +Node: Two-way processors952133 +Node: Printing Messages954337 +Ref: Printing Messages-Footnote-1955414 +Node: Updating `ERRNO'955566 +Node: Accessing Parameters956305 +Node: Symbol Table Access957535 +Node: Symbol table by name958049 +Node: Symbol table by cookie960025 +Ref: Symbol table by cookie-Footnote-1964158 +Node: Cached values964221 +Ref: Cached values-Footnote-1967725 +Node: Array Manipulation967816 +Ref: Array Manipulation-Footnote-1968914 +Node: Array Data Types968953 +Ref: Array Data Types-Footnote-1971656 +Node: Array Functions971748 +Node: Flattening Arrays975622 +Node: Creating Arrays982474 +Node: Extension API Variables987205 +Node: Extension Versioning987841 +Node: Extension API Informational Variables989742 +Node: Extension API Boilerplate990828 +Node: Finding Extensions994632 +Node: Extension Example995192 +Node: Internal File Description995922 +Node: Internal File Ops1000013 +Ref: Internal File Ops-Footnote-11011445 +Node: Using Internal File Ops1011585 +Ref: Using Internal File Ops-Footnote-11013932 +Node: Extension Samples1014200 +Node: Extension Sample File Functions1015724 +Node: Extension Sample Fnmatch1023292 +Node: Extension Sample Fork1024774 +Node: Extension Sample Inplace1025987 +Node: Extension Sample Ord1027662 +Node: Extension Sample Readdir1028498 +Ref: table-readdir-file-types1029354 +Node: Extension Sample Revout1030153 +Node: Extension Sample Rev2way1030744 +Node: Extension Sample Read write array1031485 +Node: Extension Sample Readfile1033364 +Node: Extension Sample API Tests1034464 +Node: Extension Sample Time1034989 +Node: gawkextlib1036304 +Node: Extension summary1039117 +Node: Extension Exercises1042810 +Node: Language History1043532 +Node: V7/SVR3.11045175 +Node: SVR41047495 +Node: POSIX1048937 +Node: BTL1050323 +Node: POSIX/GNU1051057 +Node: Feature History1056833 +Node: Common Extensions1069924 +Node: Ranges and Locales1071236 +Ref: Ranges and Locales-Footnote-11075853 +Ref: Ranges and Locales-Footnote-21075880 +Ref: Ranges and Locales-Footnote-31076114 +Node: Contributors1076335 +Node: History summary1081760 +Node: Installation1083129 +Node: Gawk Distribution1084080 +Node: Getting1084564 +Node: Extracting1085388 +Node: Distribution contents1087030 +Node: Unix Installation1092800 +Node: Quick Installation1093417 +Node: Additional Configuration Options1095859 +Node: Configuration Philosophy1097597 +Node: Non-Unix Installation1099948 +Node: PC Installation1100406 +Node: PC Binary Installation1101717 +Node: PC Compiling1103565 +Ref: PC Compiling-Footnote-11106564 +Node: PC Testing1106669 +Node: PC Using1107845 +Node: Cygwin1111997 +Node: MSYS1112806 +Node: VMS Installation1113304 +Node: VMS Compilation1114100 +Ref: VMS Compilation-Footnote-11115322 +Node: VMS Dynamic Extensions1115380 +Node: VMS Installation Details1116753 +Node: VMS Running1119005 +Node: VMS GNV1121839 +Node: VMS Old Gawk1122562 +Node: Bugs1123032 +Node: Other Versions1127036 +Node: Installation summary1133260 +Node: Notes1134316 +Node: Compatibility Mode1135181 +Node: Additions1135963 +Node: Accessing The Source1136888 +Node: Adding Code1138324 +Node: New Ports1144502 +Node: Derived Files1148983 +Ref: Derived Files-Footnote-11154458 +Ref: Derived Files-Footnote-21154492 +Ref: Derived Files-Footnote-31155088 +Node: Future Extensions1155202 +Node: Implementation Limitations1155808 +Node: Extension Design1157056 +Node: Old Extension Problems1158210 +Ref: Old Extension Problems-Footnote-11159727 +Node: Extension New Mechanism Goals1159784 +Ref: Extension New Mechanism Goals-Footnote-11163144 +Node: Extension Other Design Decisions1163333 +Node: Extension Future Growth1165439 +Node: Old Extension Mechanism1166275 +Node: Notes summary1168037 +Node: Basic Concepts1169223 +Node: Basic High Level1169904 +Ref: figure-general-flow1170176 +Ref: figure-process-flow1170775 +Ref: Basic High Level-Footnote-11174004 +Node: Basic Data Typing1174189 +Node: Glossary1177517 +Node: Copying1202669 +Node: GNU Free Documentation License1240225 +Node: Index1265361 End Tag Table |