aboutsummaryrefslogtreecommitdiffstats
path: root/extension
diff options
context:
space:
mode:
Diffstat (limited to 'extension')
-rw-r--r--extension/ChangeLog75
-rw-r--r--extension/Makefile.am2
-rw-r--r--extension/Makefile.in2
-rw-r--r--extension/build-aux/ChangeLog13
-rwxr-xr-xextension/build-aux/config.guess188
-rwxr-xr-xextension/build-aux/config.rpath106
-rwxr-xr-xextension/build-aux/config.sub99
-rwxr-xr-xextension/build-aux/depcomp442
-rwxr-xr-xextension/build-aux/install-sh337
-rw-r--r--extension/configh.in20
-rwxr-xr-xextension/configure233
-rw-r--r--extension/configure.ac10
-rw-r--r--extension/filefuncs.c36
-rw-r--r--extension/fnmatch.c14
-rw-r--r--extension/gawkdirfd.h4
-rw-r--r--extension/gawkfts.c8
-rw-r--r--extension/inplace.c8
-rw-r--r--extension/m4/ChangeLog4
-rw-r--r--extension/readdir.c10
-rw-r--r--extension/readfile.3am20
-rw-r--r--extension/readfile.c151
-rw-r--r--extension/revtwoway.c6
-rw-r--r--extension/rwarray.c8
-rw-r--r--extension/testext.c6
-rw-r--r--extension/time.c49
25 files changed, 1180 insertions, 671 deletions
diff --git a/extension/ChangeLog b/extension/ChangeLog
index 328d58ba..f3a1c7a8 100644
--- a/extension/ChangeLog
+++ b/extension/ChangeLog
@@ -1,3 +1,78 @@
+2014-04-11 Arnold D. Robbins <arnold@skeeve.com>
+
+ * Makefile.am (install-data-hook): Use $(DESTDIR) when removing
+ the .la files. Thanks to Lars Wendler <polynomial-c@gentoo.org>
+ for the report and fix.
+
+2014-04-08 Arnold D. Robbins <arnold@skeeve.com>
+
+ * 4.1.1: Release tar ball made.
+
+2014-04-08 Arnold D. Robbins <arnold@skeeve.com>
+
+ * configure.ac: Bump version before release.
+
+2014-04-04 Arnold D. Robbins <arnold@skeeve.com>
+
+ * time.c: Include <time.h> unconditionally to get declaration
+ of nanosleep on Linux. Avoids a warning. Thanks to Michal
+ Jaegermann.
+
+2014-03-31 Arnold D. Robbins <arnold@skeeve.com>
+
+ * configure.ac: Remove -Wextra to avoid killing compilations
+ on older versions of gcc. Thanks to Antonio Diaz Diaz for
+ the report.
+
+2014-03-28 Arnold D. Robbins <arnold@skeeve.com>
+
+ * configure.ac: Add AC_HEADER_TIME and AC_HEADER_DIRENT, and
+ rearrange order of macros some. May help on older systems.
+
+2014-03-27 Arnold D. Robbins <arnold@skeeve.com>
+
+ * readfile.c: Add an input parser that works off of
+ PROCINFO["readfile"].
+ * readfile.3am: Document same.
+
+2014-03-23 Arnold D. Robbins <arnold@skeeve.com>
+
+ * gawkfts.c (MAXPATHLEN): Add a default definition. Thanks to
+ Antonio Diaz Dian and Nelson H.F. Beebe.
+ * readdir.c (PATH_MAX): Add a default definition. Thanks to
+ Nelson H.F. Beebe.
+
+2014-03-08 Andrew J. Schorr <aschorr@telemetry-investments.com>
+
+ * filefuncs.c (read_symlink, do_fts): Replace free with gawk_free.
+ * inplace.c (at_exit, do_inplace_end): Ditto.
+ * readdir.c (dir_close): Ditto.
+ * readfile.c (do_readfile): Ditto.
+ * revtwoway.c (close_two_proc_data): Ditto.
+ * rwarray.c (read_elem): Replace realloc with gawk_realloc.
+ (read_value): Replace malloc and free with gawk_malloc and gawk_free.
+ * testext.c (try_modify_environ): Replace free with gawk_free.
+
+2014-02-12 John E. Malmberg <wb8tyw@qsl.net>
+
+ * time.c: Better hack for nanosleep bug based on feedback from HP.
+
+2013-12-29 John E. Malmberg <wb8tyw@qsl.net>
+
+ * filefuncs.c: Fix compile on VMS.
+ * time.c: Fix compile on VMS.
+
+2013-12-29 Arnold D. Robbins <arnold@skeeve.com>
+
+ * gawkfts.c: Wrap include of <sys/param.h> in HAVE_SYS_PARAM_H,
+ as I should have done to start with. For VMS.
+
+2013-12-29 John E. Malmberg <wb8tyw@qsl.net>
+
+ * gawkdirfd.h: Adjust include for VMS.
+ * filefuncs.c: Make it compile on VMS.
+ * fnmatch.c: Make it compile on VMS.
+
2013-12-21 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Remove MirBSD and OS/390 hack to create
diff --git a/extension/Makefile.am b/extension/Makefile.am
index 9c49bb81..11826e2b 100644
--- a/extension/Makefile.am
+++ b/extension/Makefile.am
@@ -100,7 +100,7 @@ testext_la_LIBADD = $(MY_LIBS)
install-data-hook:
for i in $(pkgextension_LTLIBRARIES) ; do \
- $(RM) $(pkgextensiondir)/$$i ; \
+ $(RM) $(DESTDIR)$(pkgextensiondir)/$$i ; \
done
# Keep the uninstall check working:
diff --git a/extension/Makefile.in b/extension/Makefile.in
index 040cdb8f..d81b1696 100644
--- a/extension/Makefile.in
+++ b/extension/Makefile.in
@@ -1231,7 +1231,7 @@ uninstall-man: uninstall-man3
install-data-hook:
for i in $(pkgextension_LTLIBRARIES) ; do \
- $(RM) $(pkgextensiondir)/$$i ; \
+ $(RM) $(DESTDIR)$(pkgextensiondir)/$$i ; \
done
# Keep the uninstall check working:
diff --git a/extension/build-aux/ChangeLog b/extension/build-aux/ChangeLog
index bf00e289..697db607 100644
--- a/extension/build-aux/ChangeLog
+++ b/extension/build-aux/ChangeLog
@@ -1,3 +1,16 @@
+2014-04-08 Arnold D. Robbins <arnold@skeeve.com>
+
+ * 4.1.1: Release tar ball made.
+
+2014-01-03 Arnold D. Robbins <arnold@skeeve.com>
+
+ * config.guess, config.rpath, config.sub, depcomp,
+ install-sh: Updated.
+
+2013-12-24 Arnold D. Robbins <arnold@skeeve.com>
+
+ * config.guess: Updated.
+
2013-12-21 Arnold D. Robbins <arnold@skeeve.com>
* ltmain.sh: Updated to libtool 2.4.2.418.
diff --git a/extension/build-aux/config.guess b/extension/build-aux/config.guess
index aa04f04b..4438cd70 100755
--- a/extension/build-aux/config.guess
+++ b/extension/build-aux/config.guess
@@ -1,14 +1,12 @@
#! /bin/sh
# Attempt to guess a canonical system name.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-# 2011, 2012 Free Software Foundation, Inc.
+# Copyright 1992-2014 Free Software Foundation, Inc.
-timestamp='2012-06-17'
+timestamp='2014-01-01'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
@@ -22,19 +20,17 @@ timestamp='2012-06-17'
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner. Please send patches (context
-# diff format) to <config-patches@gnu.org> and include a ChangeLog
-# entry.
+# the same distribution terms that you use for the rest of that
+# program. This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
#
-# This script attempts to guess a canonical system name similar to
-# config.sub. If it succeeds, it prints the system name on stdout, and
-# exits with 0. Otherwise, it exits with 1.
+# Originally written by Per Bothner.
#
# You can get the latest version of this script from:
# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+#
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+
me=`echo "$0" | sed -e 's,.*/,,'`
@@ -54,9 +50,7 @@ version="\
GNU config.guess ($timestamp)
Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
-Free Software Foundation, Inc.
+Copyright 1992-2014 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -138,6 +132,27 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+case "${UNAME_SYSTEM}" in
+Linux|GNU|GNU/*)
+ # If the system lacks a compiler, then just pick glibc.
+ # We could probably try harder.
+ LIBC=gnu
+
+ eval $set_cc_for_build
+ cat <<-EOF > $dummy.c
+ #include <features.h>
+ #if defined(__UCLIBC__)
+ LIBC=uclibc
+ #elif defined(__dietlibc__)
+ LIBC=dietlibc
+ #else
+ LIBC=gnu
+ #endif
+ EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+ ;;
+esac
+
# Note: order is significant - the case branches are not exclusive.
case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
@@ -306,7 +321,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
echo arm-acorn-riscix${UNAME_RELEASE}
exit ;;
- arm:riscos:*:*|arm:RISCOS:*:*)
+ arm*:riscos:*:*|arm*:RISCOS:*:*)
echo arm-unknown-riscos
exit ;;
SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
@@ -805,6 +820,9 @@ EOF
i*:CYGWIN*:*)
echo ${UNAME_MACHINE}-pc-cygwin
exit ;;
+ *:MINGW64*:*)
+ echo ${UNAME_MACHINE}-pc-mingw64
+ exit ;;
*:MINGW*:*)
echo ${UNAME_MACHINE}-pc-mingw32
exit ;;
@@ -856,21 +874,21 @@ EOF
exit ;;
*:GNU:*:*)
# the GNU system
- echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
exit ;;
*:GNU/*:*:*)
# other systems with GNU libc and userland
- echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
exit ;;
i*86:Minix:*:*)
echo ${UNAME_MACHINE}-pc-minix
exit ;;
aarch64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
aarch64_be:Linux:*:*)
UNAME_MACHINE=aarch64_be
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
alpha:Linux:*:*)
case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
@@ -883,59 +901,54 @@ EOF
EV68*) UNAME_MACHINE=alphaev68 ;;
esac
objdump --private-headers /bin/sh | grep -q ld.so.1
- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+ if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ arc:Linux:*:* | arceb:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
arm*:Linux:*:*)
eval $set_cc_for_build
if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ARM_EABI__
then
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
else
if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ARM_PCS_VFP
then
- echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
else
- echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf
fi
fi
exit ;;
avr32*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
cris:Linux:*:*)
- echo ${UNAME_MACHINE}-axis-linux-gnu
+ echo ${UNAME_MACHINE}-axis-linux-${LIBC}
exit ;;
crisv32:Linux:*:*)
- echo ${UNAME_MACHINE}-axis-linux-gnu
+ echo ${UNAME_MACHINE}-axis-linux-${LIBC}
exit ;;
frv:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
hexagon:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
i*86:Linux:*:*)
- LIBC=gnu
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #ifdef __dietlibc__
- LIBC=dietlibc
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
- echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+ echo ${UNAME_MACHINE}-pc-linux-${LIBC}
exit ;;
ia64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
m32r*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
m68*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
mips:Linux:*:* | mips64:Linux:*:*)
eval $set_cc_for_build
@@ -954,54 +967,63 @@ EOF
#endif
EOF
eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
;;
+ or1k:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
or32:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
padre:Linux:*:*)
- echo sparc-unknown-linux-gnu
+ echo sparc-unknown-linux-${LIBC}
exit ;;
parisc64:Linux:*:* | hppa64:Linux:*:*)
- echo hppa64-unknown-linux-gnu
+ echo hppa64-unknown-linux-${LIBC}
exit ;;
parisc:Linux:*:* | hppa:Linux:*:*)
# Look for CPU level
case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
- PA7*) echo hppa1.1-unknown-linux-gnu ;;
- PA8*) echo hppa2.0-unknown-linux-gnu ;;
- *) echo hppa-unknown-linux-gnu ;;
+ PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
+ PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
+ *) echo hppa-unknown-linux-${LIBC} ;;
esac
exit ;;
ppc64:Linux:*:*)
- echo powerpc64-unknown-linux-gnu
+ echo powerpc64-unknown-linux-${LIBC}
exit ;;
ppc:Linux:*:*)
- echo powerpc-unknown-linux-gnu
+ echo powerpc-unknown-linux-${LIBC}
+ exit ;;
+ ppc64le:Linux:*:*)
+ echo powerpc64le-unknown-linux-${LIBC}
+ exit ;;
+ ppcle:Linux:*:*)
+ echo powerpcle-unknown-linux-${LIBC}
exit ;;
s390:Linux:*:* | s390x:Linux:*:*)
- echo ${UNAME_MACHINE}-ibm-linux
+ echo ${UNAME_MACHINE}-ibm-linux-${LIBC}
exit ;;
sh64*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
sh*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
sparc:Linux:*:* | sparc64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
tile*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
vax:Linux:*:*)
- echo ${UNAME_MACHINE}-dec-linux-gnu
+ echo ${UNAME_MACHINE}-dec-linux-${LIBC}
exit ;;
x86_64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
xtensa*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
i*86:DYNIX/ptx:4*:*)
# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
@@ -1205,6 +1227,9 @@ EOF
BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
echo i586-pc-haiku
exit ;;
+ x86_64:Haiku:*:*)
+ echo x86_64-unknown-haiku
+ exit ;;
SX-4:SUPER-UX:*:*)
echo sx4-nec-superux${UNAME_RELEASE}
exit ;;
@@ -1231,19 +1256,31 @@ EOF
exit ;;
*:Darwin:*:*)
UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
- case $UNAME_PROCESSOR in
- i386)
- eval $set_cc_for_build
- if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
- if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
- (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
- grep IS_64BIT_ARCH >/dev/null
- then
- UNAME_PROCESSOR="x86_64"
- fi
- fi ;;
- unknown) UNAME_PROCESSOR=powerpc ;;
- esac
+ eval $set_cc_for_build
+ if test "$UNAME_PROCESSOR" = unknown ; then
+ UNAME_PROCESSOR=powerpc
+ fi
+ if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ case $UNAME_PROCESSOR in
+ i386) UNAME_PROCESSOR=x86_64 ;;
+ powerpc) UNAME_PROCESSOR=powerpc64 ;;
+ esac
+ fi
+ fi
+ elif test "$UNAME_PROCESSOR" = i386 ; then
+ # Avoid executing cc on OS X 10.9, as it ships with a stub
+ # that puts up a graphical alert prompting to install
+ # developer tools. Any system running Mac OS X 10.7 or
+ # later (Darwin 11 and later) is required to have a 64-bit
+ # processor. This is not true of the ARM version of Darwin
+ # that Apple uses in portable devices.
+ UNAME_PROCESSOR=x86_64
+ fi
echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
exit ;;
*:procnto*:*:* | *:QNX:[0123456789]*:*)
@@ -1334,9 +1371,6 @@ EOF
exit ;;
esac
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
eval $set_cc_for_build
cat >$dummy.c <<EOF
#ifdef _SEQUENT_
diff --git a/extension/build-aux/config.rpath b/extension/build-aux/config.rpath
index 17298f23..ab6fd995 100755
--- a/extension/build-aux/config.rpath
+++ b/extension/build-aux/config.rpath
@@ -2,7 +2,7 @@
# Output a system dependent set of variables, describing how to set the
# run time search path of shared libraries in an executable.
#
-# Copyright 1996-2010 Free Software Foundation, Inc.
+# Copyright 1996-2014 Free Software Foundation, Inc.
# Taken from GNU libtool, 2001
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
@@ -25,7 +25,7 @@
# known workaround is to choose shorter directory names for the build
# directory and/or the installation directory.
-# All known linkers require a `.a' archive for static linking (except MSVC,
+# All known linkers require a '.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
shrext=.so
@@ -57,13 +57,6 @@ else
aix*)
wl='-Wl,'
;;
- darwin*)
- case $cc_basename in
- xlc*)
- wl='-Wl,'
- ;;
- esac
- ;;
mingw* | cygwin* | pw32* | os2* | cegcc*)
;;
hpux9* | hpux10* | hpux11*)
@@ -72,9 +65,7 @@ else
irix5* | irix6* | nonstopux*)
wl='-Wl,'
;;
- newsos6)
- ;;
- linux* | k*bsd*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
case $cc_basename in
ecc*)
wl='-Wl,'
@@ -85,17 +76,26 @@ else
lf95*)
wl='-Wl,'
;;
- pgcc | pgf77 | pgf90)
+ nagfor*)
+ wl='-Wl,-Wl,,'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
wl='-Wl,'
;;
ccc*)
wl='-Wl,'
;;
+ xl* | bgxl* | bgf* | mpixl*)
+ wl='-Wl,'
+ ;;
como)
wl='-lopt='
;;
*)
case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ F* | *Sun*Fortran*)
+ wl=
+ ;;
*Sun\ C*)
wl='-Wl,'
;;
@@ -103,13 +103,24 @@ else
;;
esac
;;
+ newsos6)
+ ;;
+ *nto* | *qnx*)
+ ;;
osf3* | osf4* | osf5*)
wl='-Wl,'
;;
rdos*)
;;
solaris*)
- wl='-Wl,'
+ case $cc_basename in
+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ wl='-Qoption ld '
+ ;;
+ *)
+ wl='-Wl,'
+ ;;
+ esac
;;
sunos4*)
wl='-Qoption ld '
@@ -171,15 +182,14 @@ if test "$with_gnu_ld" = yes; then
fi
;;
amigaos*)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we cannot use
- # them.
- ld_shlibs=no
+ case "$host_cpu" in
+ powerpc)
+ ;;
+ m68k)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
;;
beos*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
@@ -198,11 +208,13 @@ if test "$with_gnu_ld" = yes; then
ld_shlibs=no
fi
;;
+ haiku*)
+ ;;
interix[3-9]*)
hardcode_direct=no
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
;;
- gnu* | linux* | k*bsd*-gnu)
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
:
else
@@ -325,10 +337,14 @@ else
fi
;;
amigaos*)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- # see comment about different semantics on the GNU ld section
- ld_shlibs=no
+ case "$host_cpu" in
+ powerpc)
+ ;;
+ m68k)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
;;
bsdi[45]*)
;;
@@ -342,24 +358,15 @@ else
;;
darwin* | rhapsody*)
hardcode_direct=no
- if test "$GCC" = yes ; then
+ if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then
:
else
- case $cc_basename in
- xlc*)
- ;;
- *)
- ld_shlibs=no
- ;;
- esac
+ ld_shlibs=no
fi
;;
dgux*)
hardcode_libdir_flag_spec='-L$libdir'
;;
- freebsd1*)
- ld_shlibs=no
- ;;
freebsd2.2*)
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
@@ -420,6 +427,8 @@ else
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator=:
;;
+ *nto* | *qnx*)
+ ;;
openbsd*)
if test -f /usr/libexec/ld.so; then
hardcode_direct=yes
@@ -515,7 +524,12 @@ case "$host_os" in
library_names_spec='$libname$shrext'
;;
amigaos*)
- library_names_spec='$libname.a'
+ case "$host_cpu" in
+ powerpc*)
+ library_names_spec='$libname$shrext' ;;
+ m68k)
+ library_names_spec='$libname.a' ;;
+ esac
;;
beos*)
library_names_spec='$libname$shrext'
@@ -534,8 +548,6 @@ case "$host_os" in
dgux*)
library_names_spec='$libname$shrext'
;;
- freebsd1*)
- ;;
freebsd* | dragonfly*)
case "$host_os" in
freebsd[123]*)
@@ -547,6 +559,9 @@ case "$host_os" in
gnu*)
library_names_spec='$libname$shrext'
;;
+ haiku*)
+ library_names_spec='$libname$shrext'
+ ;;
hpux9* | hpux10* | hpux11*)
case $host_cpu in
ia64*)
@@ -582,7 +597,7 @@ case "$host_os" in
;;
linux*oldld* | linux*aout* | linux*coff*)
;;
- linux* | k*bsd*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
library_names_spec='$libname$shrext'
;;
knetbsd*-gnu)
@@ -594,7 +609,7 @@ case "$host_os" in
newsos6)
library_names_spec='$libname$shrext'
;;
- nto-qnx*)
+ *nto* | *qnx*)
library_names_spec='$libname$shrext'
;;
openbsd*)
@@ -625,6 +640,9 @@ case "$host_os" in
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
library_names_spec='$libname$shrext'
;;
+ tpf*)
+ library_names_spec='$libname$shrext'
+ ;;
uts4*)
library_names_spec='$libname$shrext'
;;
diff --git a/extension/build-aux/config.sub b/extension/build-aux/config.sub
index aa2cf19b..092cff00 100755
--- a/extension/build-aux/config.sub
+++ b/extension/build-aux/config.sub
@@ -1,24 +1,18 @@
#! /bin/sh
# Configuration validation subroutine script.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-# 2011, 2012 Free Software Foundation, Inc.
+# Copyright 1992-2014 Free Software Foundation, Inc.
-timestamp='2012-06-17'
+timestamp='2014-01-01'
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine. It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see <http://www.gnu.org/licenses/>.
@@ -26,11 +20,12 @@ timestamp='2012-06-17'
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+# the same distribution terms that you use for the rest of that
+# program. This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
-# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted GNU ChangeLog entry.
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
@@ -73,9 +68,7 @@ Report bugs and patches to <config-patches@gnu.org>."
version="\
GNU config.sub ($timestamp)
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
-Free Software Foundation, Inc.
+Copyright 1992-2014 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -123,7 +116,7 @@ esac
maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
- linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+ linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
knetbsd*-gnu* | netbsd*-gnu* | \
kopensolaris*-gnu* | \
storm-chaos* | os2-emx* | rtmk-nova*)
@@ -156,7 +149,7 @@ case $os in
-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple | -axis | -knuth | -cray | -microblaze)
+ -apple | -axis | -knuth | -cray | -microblaze*)
os=
basic_machine=$1
;;
@@ -259,10 +252,12 @@ case $basic_machine in
| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
| am33_2.0 \
- | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
- | be32 | be64 \
+ | arc | arceb \
+ | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
+ | avr | avr32 \
+ | be32 | be64 \
| bfin \
- | c4x | clipper \
+ | c4x | c8051 | clipper \
| d10v | d30v | dlx | dsp16xx \
| epiphany \
| fido | fr30 | frv \
@@ -270,10 +265,11 @@ case $basic_machine in
| hexagon \
| i370 | i860 | i960 | ia64 \
| ip2k | iq2000 \
+ | k1om \
| le32 | le64 \
| lm32 \
| m32c | m32r | m32rle | m68000 | m68k | m88k \
- | maxq | mb | microblaze | mcore | mep | metag \
+ | maxq | mb | microblaze | microblazeel | mcore | mep | metag \
| mips | mipsbe | mipseb | mipsel | mipsle \
| mips16 \
| mips64 | mips64el \
@@ -291,16 +287,17 @@ case $basic_machine in
| mipsisa64r2 | mipsisa64r2el \
| mipsisa64sb1 | mipsisa64sb1el \
| mipsisa64sr71k | mipsisa64sr71kel \
+ | mipsr5900 | mipsr5900el \
| mipstx39 | mipstx39el \
| mn10200 | mn10300 \
| moxie \
| mt \
| msp430 \
| nds32 | nds32le | nds32be \
- | nios | nios2 \
+ | nios | nios2 | nios2eb | nios2el \
| ns16k | ns32k \
| open8 \
- | or32 \
+ | or1k | or32 \
| pdp10 | pdp11 | pj | pjl \
| powerpc | powerpc64 | powerpc64le | powerpcle \
| pyramid \
@@ -328,7 +325,7 @@ case $basic_machine in
c6x)
basic_machine=tic6x-unknown
;;
- m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
+ m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
basic_machine=$basic_machine-unknown
os=-none
;;
@@ -370,13 +367,13 @@ case $basic_machine in
| aarch64-* | aarch64_be-* \
| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
- | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
| arm-* | armbe-* | armle-* | armeb-* | armv*-* \
| avr-* | avr32-* \
| be32-* | be64-* \
| bfin-* | bs2000-* \
| c[123]* | c30-* | [cjt]90-* | c4x-* \
- | clipper-* | craynv-* | cydra-* \
+ | c8051-* | clipper-* | craynv-* | cydra-* \
| d10v-* | d30v-* | dlx-* \
| elxsi-* \
| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
@@ -385,11 +382,13 @@ case $basic_machine in
| hexagon-* \
| i*86-* | i860-* | i960-* | ia64-* \
| ip2k-* | iq2000-* \
+ | k1om-* \
| le32-* | le64-* \
| lm32-* \
| m32c-* | m32r-* | m32rle-* \
| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
- | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
+ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+ | microblaze-* | microblazeel-* \
| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
| mips16-* \
| mips64-* | mips64el-* \
@@ -407,12 +406,13 @@ case $basic_machine in
| mipsisa64r2-* | mipsisa64r2el-* \
| mipsisa64sb1-* | mipsisa64sb1el-* \
| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+ | mipsr5900-* | mipsr5900el-* \
| mipstx39-* | mipstx39el-* \
| mmix-* \
| mt-* \
| msp430-* \
| nds32-* | nds32le-* | nds32be-* \
- | nios-* | nios2-* \
+ | nios-* | nios2-* | nios2eb-* | nios2el-* \
| none-* | np1-* | ns16k-* | ns32k-* \
| open8-* \
| orion-* \
@@ -788,11 +788,15 @@ case $basic_machine in
basic_machine=ns32k-utek
os=-sysv
;;
- microblaze)
+ microblaze*)
basic_machine=microblaze-xilinx
;;
+ mingw64)
+ basic_machine=x86_64-pc
+ os=-mingw64
+ ;;
mingw32)
- basic_machine=i386-pc
+ basic_machine=i686-pc
os=-mingw32
;;
mingw32ce)
@@ -828,7 +832,7 @@ case $basic_machine in
basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
;;
msys)
- basic_machine=i386-pc
+ basic_machine=i686-pc
os=-msys
;;
mvs)
@@ -1019,7 +1023,11 @@ case $basic_machine in
basic_machine=i586-unknown
os=-pw32
;;
- rdos)
+ rdos | rdos64)
+ basic_machine=x86_64-pc
+ os=-rdos
+ ;;
+ rdos32)
basic_machine=i386-pc
os=-rdos
;;
@@ -1346,7 +1354,7 @@ case $os in
-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
| -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
| -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
- | -sym* | -kopensolaris* \
+ | -sym* | -kopensolaris* | -plan9* \
| -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
| -aos* | -aros* \
| -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
@@ -1359,8 +1367,8 @@ case $os in
| -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
| -chorusos* | -chorusrdb* | -cegcc* \
| -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -linux-android* \
- | -linux-newlib* | -linux-uclibc* \
+ | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+ | -linux-newlib* | -linux-musl* | -linux-uclibc* \
| -uxpv* | -beos* | -mpeix* | -udk* \
| -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
| -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
@@ -1492,9 +1500,6 @@ case $os in
-aros*)
os=-aros
;;
- -kaos*)
- os=-kaos
- ;;
-zvmoe)
os=-zvmoe
;;
@@ -1543,6 +1548,9 @@ case $basic_machine in
c4x-* | tic4x-*)
os=-coff
;;
+ c8051-*)
+ os=-elf
+ ;;
hexagon-*)
os=-elf
;;
@@ -1586,6 +1594,9 @@ case $basic_machine in
mips*-*)
os=-elf
;;
+ or1k-*)
+ os=-elf
+ ;;
or32-*)
os=-coff
;;
diff --git a/extension/build-aux/depcomp b/extension/build-aux/depcomp
index 0544c683..31788017 100755
--- a/extension/build-aux/depcomp
+++ b/extension/build-aux/depcomp
@@ -1,9 +1,9 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
-scriptversion=2012-07-12.20; # UTC
+scriptversion=2013-05-30.07; # UTC
-# Copyright (C) 1999-2012 Free Software Foundation, Inc.
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -27,9 +27,9 @@ scriptversion=2012-07-12.20; # UTC
case $1 in
'')
- echo "$0: No command. Try '$0 --help' for more information." 1>&2
- exit 1;
- ;;
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
-h | --h*)
cat <<\EOF
Usage: depcomp [--help] [--version] PROGRAM [ARGS]
@@ -56,11 +56,65 @@ EOF
;;
esac
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'. Note that this directory component will
+# be either empty or ending with a '/' character. This is deliberate.
+set_dir_from ()
+{
+ case $1 in
+ */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+ *) dir=;;
+ esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+ base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+ echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+ # If the compiler actually managed to produce a dependency file,
+ # post-process it.
+ if test -f "$tmpdepfile"; then
+ # Each line is of the form 'foo.o: dependency.h'.
+ # Do two passes, one to just change these to
+ # $object: dependency.h
+ # and one to simply output
+ # dependency.h:
+ # which is needed to avoid the deleted-header problem.
+ { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+ sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+ } > "$depfile"
+ rm -f "$tmpdepfile"
+ else
+ make_dummy_depfile
+ fi
+}
+
# A tabulation character.
tab=' '
# A newline character.
nl='
'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
@@ -74,6 +128,9 @@ tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
# Some modes work just like other modes, but use different flags. We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write. Note that we *cannot* use a case
@@ -85,32 +142,32 @@ if test "$depmode" = hp; then
fi
if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
fi
cygpath_u="cygpath -u -f -"
if test "$depmode" = msvcmsys; then
- # This is just like msvisualcpp but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvisualcpp
+ # This is just like msvisualcpp but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvisualcpp
fi
if test "$depmode" = msvc7msys; then
- # This is just like msvc7 but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvc7
+ # This is just like msvc7 but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvc7
fi
if test "$depmode" = xlc; then
- # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations.
- gccflag=-qmakedep=gcc,-MF
- depmode=gcc
+ # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+ gccflag=-qmakedep=gcc,-MF
+ depmode=gcc
fi
case "$depmode" in
@@ -133,8 +190,7 @@ gcc3)
done
"$@"
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
@@ -142,13 +198,17 @@ gcc3)
;;
gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
## There are various ways to get dependency output from gcc. Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
## up in a subdir. Having to rename by hand is ugly.
## (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-## -MM, not -M (despite what the docs say).
+## -MM, not -M (despite what the docs say). Also, it might not be
+## supported by the other compilers which use the 'gcc' depmode.
## - Using -M directly means running the compiler twice (even worse
## than renaming).
if test -z "$gccflag"; then
@@ -156,15 +216,14 @@ gcc)
fi
"$@" -Wp,"$gccflag$tmpdepfile"
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
- alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
+ # The second -e expression handles DOS-style file names with drive
+ # letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the "deleted header file" problem.
@@ -173,15 +232,15 @@ gcc)
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
- tr ' ' "$nl" < "$tmpdepfile" |
## Some versions of gcc put a space before the ':'. On the theory
## that the space means something, we add a space to the output as
## well. hp depmode also adds that space, but also prefixes the VPATH
## to the object. Take care to not repeat it in the output.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -192,47 +251,6 @@ hp)
exit 1
;;
-sgi)
- if test "$libtool" = yes; then
- "$@" "-Wp,-MDupdate,$tmpdepfile"
- else
- "$@" -MDupdate "$tmpdepfile"
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
-
- if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
- echo "$object : \\" > "$depfile"
-
- # Clip off the initial element (the dependent). Don't try to be
- # clever and replace this with sed code, as IRIX sed won't handle
- # lines with more than a fixed number of characters (4096 in
- # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
- # the IRIX cc adds comments like '#:fec' to the end of the
- # dependency line.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
- tr "$nl" ' ' >> "$depfile"
- echo >> "$depfile"
-
- # The second pass generates a dummy entry for each header file.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
xlc)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
@@ -246,9 +264,8 @@ aix)
# current directory. Also, the AIX compiler puts '$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ set_dir_from "$object"
+ set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.u
tmpdepfile2=$base.u
@@ -261,9 +278,7 @@ aix)
"$@" -M
fi
stat=$?
-
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
@@ -272,65 +287,37 @@ aix)
do
test -f "$tmpdepfile" && break
done
- if test -f "$tmpdepfile"; then
- # Each line is of the form 'foo.o: dependent.h'.
- # Do two passes, one to just change these to
- # '$object: dependent.h' and one to simply 'dependent.h:'.
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
+ aix_post_process_depfile
;;
-icc)
- # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
- # However on
- # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
- # ICC 7.0 will fill foo.d with something like
- # foo.o: sub/foo.c
- # foo.o: sub/foo.h
- # which is wrong. We want
- # sub/foo.o: sub/foo.c
- # sub/foo.o: sub/foo.h
- # sub/foo.c:
- # sub/foo.h:
- # ICC 7.1 will output
- # foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using '\':
- # foo.o: sub/foo.c ... \
- # sub/foo.h ... \
- # ...
- # tcc 0.9.26 (FIXME still under development at the moment of writing)
- # will emit a similar output, but also prepend the continuation lines
- # with horizontal tabulation characters.
+tcc)
+ # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+ # FIXME: That version still under development at the moment of writing.
+ # Make that this statement remains true also for stable, released
+ # versions.
+ # It will wrap lines (doesn't matter whether long or short) with a
+ # trailing '\', as in:
+ #
+ # foo.o : \
+ # foo.c \
+ # foo.h \
+ #
+ # It will put a trailing '\' even on the last line, and will use leading
+ # spaces rather than leading tabs (at least since its commit 0394caf7
+ # "Emit spaces for -MD").
"$@" -MD -MF "$tmpdepfile"
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
- # Each line is of the form 'foo.o: dependent.h',
- # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
- # Do two passes, one to just change these to
- # '$object: dependent.h' and one to simply 'dependent.h:'.
- sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \
- < "$tmpdepfile" > "$depfile"
- sed '
- s/[ '"$tab"'][ '"$tab"']*/ /g
- s/^ *//
- s/ *\\*$//
- s/^[^:]*: *//
- /^$/d
- /:$/d
- s/$/ :/
- ' < "$tmpdepfile" >> "$depfile"
+ # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+ # We have to change lines of the first kind to '$object: \'.
+ sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+ # And for each line of the second kind, we have to emit a 'dep.h:'
+ # dummy dependency, to avoid the deleted-header problem.
+ sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -349,34 +336,37 @@ pgcc)
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
+ set_dir_from "$object"
# Use the source, not the object, to determine the base name, since
# that's sadly what pgcc will do too.
- base=`echo "$source" | sed -e 's|^.*/||' -e 's/\.[-_a-zA-Z0-9]*$//'`
- tmpdepfile="$base.d"
+ set_base_from "$source"
+ tmpdepfile=$base.d
# For projects that build the same source file twice into different object
# files, the pgcc approach of using the *source* file root name can cause
# problems in parallel builds. Use a locking strategy to avoid stomping on
# the same $tmpdepfile.
- lockdir="$base.d-lock"
- trap "echo '$0: caught signal, cleaning up...' >&2; rm -rf $lockdir" 1 2 13 15
+ lockdir=$base.d-lock
+ trap "
+ echo '$0: caught signal, cleaning up...' >&2
+ rmdir '$lockdir'
+ exit 1
+ " 1 2 13 15
numtries=100
i=$numtries
- while test $i -gt 0 ; do
+ while test $i -gt 0; do
# mkdir is a portable test-and-set.
- if mkdir $lockdir 2>/dev/null; then
+ if mkdir "$lockdir" 2>/dev/null; then
# This process acquired the lock.
"$@" -MD
stat=$?
# Release the lock.
- rm -rf $lockdir
+ rmdir "$lockdir"
break
else
- ## the lock is being held by a different process,
- ## wait until the winning process is done or we timeout
- while test -d $lockdir && test $i -gt 0; do
+ # If the lock is being held by a different process, wait
+ # until the winning process is done or we timeout.
+ while test -d "$lockdir" && test $i -gt 0; do
sleep 1
i=`expr $i - 1`
done
@@ -402,8 +392,8 @@ pgcc)
sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process this invocation
# correctly. Breaking it into two sed invocations is a workaround.
- sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
- sed -e 's/$/ :/' >> "$depfile"
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -414,9 +404,8 @@ hp2)
# 'foo.d', which lands next to the object file, wherever that
# happens to be.
# Much of this is similar to the tru64 case; see comments there.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ set_dir_from "$object"
+ set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir.libs/$base.d
@@ -427,8 +416,7 @@ hp2)
"$@" +Maked
fi
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
@@ -438,76 +426,61 @@ hp2)
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+ sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
# Add 'dependent.h:' lines.
sed -ne '2,${
- s/^ *//
- s/ \\*$//
- s/$/:/
- p
- }' "$tmpdepfile" >> "$depfile"
+ s/^ *//
+ s/ \\*$//
+ s/$/:/
+ p
+ }' "$tmpdepfile" >> "$depfile"
else
- echo "#dummy" > "$depfile"
+ make_dummy_depfile
fi
rm -f "$tmpdepfile" "$tmpdepfile2"
;;
tru64)
- # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in 'foo.d' instead, so we check for that too.
- # Subdirectories are respected.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
- if test "$libtool" = yes; then
- # With Tru64 cc, shared objects can also be used to make a
- # static library. This mechanism is used in libtool 1.4 series to
- # handle both shared and static libraries in a single compilation.
- # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
- #
- # With libtool 1.5 this exception was removed, and libtool now
- # generates 2 separate objects for the 2 libraries. These two
- # compilations output dependencies in $dir.libs/$base.o.d and
- # in $dir$base.o.d. We have to check for both files, because
- # one of the two compilations can be disabled. We should prefer
- # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
- # automatically cleaned when .libs/ is deleted, while ignoring
- # the former would cause a distcleancheck panic.
- tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
- tmpdepfile2=$dir$base.o.d # libtool 1.5
- tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
- tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
- "$@" -Wc,-MD
- else
- tmpdepfile1=$dir$base.o.d
- tmpdepfile2=$dir$base.d
- tmpdepfile3=$dir$base.d
- tmpdepfile4=$dir$base.d
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in 'foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ set_dir_from "$object"
+ set_base_from "$object"
+
+ if test "$libtool" = yes; then
+ # Libtool generates 2 separate objects for the 2 libraries. These
+ # two compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir$base.o.d # libtool 1.5
+ tmpdepfile2=$dir.libs/$base.o.d # Likewise.
+ tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ # Same post-processing that is required for AIX mode.
+ aix_post_process_depfile
+ ;;
msvc7)
if test "$libtool" = yes; then
@@ -518,8 +491,7 @@ msvc7)
"$@" $showIncludes > "$tmpdepfile"
stat=$?
grep -v '^Note: including file: ' "$tmpdepfile"
- if test "$stat" = 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
@@ -545,6 +517,7 @@ $ {
G
p
}' >> "$depfile"
+ echo >> "$depfile" # make sure the fragment doesn't end with a backslash
rm -f "$tmpdepfile"
;;
@@ -596,13 +569,14 @@ dashmstdout)
# in the target name. This is to cope with DOS-style filenames:
# a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
"$@" $dashmflag |
- sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile"
+ sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
- tr ' ' "$nl" < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this sed invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -655,10 +629,12 @@ makedepend)
# makedepend may prepend the VPATH from the source file name to the object.
# No need to regex-escape $object, excess matching of '.' is harmless.
sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
- sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process the last invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed '1,2d' "$tmpdepfile" \
+ | tr ' ' "$nl" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile" "$tmpdepfile".bak
;;
@@ -694,10 +670,10 @@ cpp)
esac
done
- "$@" -E |
- sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
- sed '$ s: \\$::' > "$tmpdepfile"
+ "$@" -E \
+ | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ | sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
@@ -729,15 +705,15 @@ msvisualcpp)
shift
;;
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
+ set fnord "$@"
+ shift
+ shift
+ ;;
*)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
esac
done
"$@" -E 2>/dev/null |
diff --git a/extension/build-aux/install-sh b/extension/build-aux/install-sh
index 377bb868..04367377 100755
--- a/extension/build-aux/install-sh
+++ b/extension/build-aux/install-sh
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2011-11-20.07; # UTC
+scriptversion=2013-10-30.23; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -41,19 +41,15 @@ scriptversion=2011-11-20.07; # UTC
# This script is compatible with the BSD install script, but was written
# from scratch.
+tab=' '
nl='
'
-IFS=" "" $nl"
+IFS=" $tab$nl"
-# set DOITPROG to echo to test this script
+# Set DOITPROG to "echo" to test this script.
-# Don't use :- since 4.3BSD and earlier shells don't like it.
doit=${DOITPROG-}
-if test -z "$doit"; then
- doit_exec=exec
-else
- doit_exec=$doit
-fi
+doit_exec=${doit:-exec}
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
@@ -68,17 +64,6 @@ mvprog=${MVPROG-mv}
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}
-posix_glob='?'
-initialize_posix_glob='
- test "$posix_glob" != "?" || {
- if (set -f) 2>/dev/null; then
- posix_glob=
- else
- posix_glob=:
- fi
- }
-'
-
posix_mkdir=
# Desired mode of installed file.
@@ -137,40 +122,39 @@ while test $# -ne 0; do
-d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
- shift;;
+ shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
- case $mode in
- *' '* | *' '* | *'
-'* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
- shift;;
+ case $mode in
+ *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
-o) chowncmd="$chownprog $2"
- shift;;
+ shift;;
-s) stripcmd=$stripprog;;
-t) dst_arg=$2
- # Protect names problematic for 'test' and other utilities.
- case $dst_arg in
- -* | [=\(\)!]) dst_arg=./$dst_arg;;
- esac
- shift;;
+ # Protect names problematic for 'test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ shift;;
-T) no_target_directory=true;;
--version) echo "$0 $scriptversion"; exit $?;;
- --) shift
- break;;
+ --) shift
+ break;;
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
*) break;;
esac
@@ -223,16 +207,16 @@ if test -z "$dir_arg"; then
*[0-7])
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw='% 200'
+ u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw=,u+rw
+ u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
@@ -270,40 +254,14 @@ do
# if double slashes aren't ignored.
if test -d "$dst"; then
if test -n "$no_target_directory"; then
- echo "$0: $dst_arg: Is a directory" >&2
- exit 1
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
fi
dstdir=$dst
dst=$dstdir/`basename "$src"`
dstdir_status=0
else
- # Prefer dirname, but fall back on a substitute if dirname fails.
- dstdir=`
- (dirname "$dst") 2>/dev/null ||
- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$dst" : 'X\(//\)[^/]' \| \
- X"$dst" : 'X\(//\)$' \| \
- X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$dst" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'
- `
-
+ dstdir=`dirname "$dst"`
test -d "$dstdir"
dstdir_status=$?
fi
@@ -314,74 +272,74 @@ do
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
-
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
- else
- mkdir_mode=
- fi
-
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
- if (umask $mkdir_umask &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- ls_ld_tmpdir=`ls -ld "$tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/d" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
- fi
- trap '' 0;;
- esac;;
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
+
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
esac
if
$posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
)
then :
else
@@ -391,53 +349,51 @@ do
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
- /*) prefix='/';;
- [-=\(\)!]*) prefix='./';;
- *) prefix='';;
+ /*) prefix='/';;
+ [-=\(\)!]*) prefix='./';;
+ *) prefix='';;
esac
- eval "$initialize_posix_glob"
-
oIFS=$IFS
IFS=/
- $posix_glob set -f
+ set -f
set fnord $dstdir
shift
- $posix_glob set +f
+ set +f
IFS=$oIFS
prefixes=
for d
do
- test X"$d" = X && continue
-
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
+ test X"$d" = X && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
done
if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
fi
fi
fi
@@ -472,15 +428,12 @@ do
# If -C, don't bother to copy if it wouldn't change the file.
if $copy_on_change &&
- old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
- new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
-
- eval "$initialize_posix_glob" &&
- $posix_glob set -f &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+ set -f &&
set X $old && old=:$2:$4:$5:$6 &&
set X $new && new=:$2:$4:$5:$6 &&
- $posix_glob set +f &&
-
+ set +f &&
test "$old" = "$new" &&
$cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
then
@@ -493,24 +446,24 @@ do
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
{
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- test ! -f "$dst" ||
- $doit $rmcmd -f "$dst" 2>/dev/null ||
- { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
- { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
- } ||
- { echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- } &&
-
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
}
fi || exit 1
diff --git a/extension/configh.in b/extension/configh.in
index 8add211a..5842f2f4 100644
--- a/extension/configh.in
+++ b/extension/configh.in
@@ -30,7 +30,8 @@
*/
#undef HAVE_DECL_DIRFD
-/* Define to 1 if you have the <dirent.h> header file. */
+/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'.
+ */
#undef HAVE_DIRENT_H
/* Define to 1 if you have the `dirfd' function. */
@@ -75,6 +76,9 @@
/* Define to 1 if you have the `nanosleep' function. */
#undef HAVE_NANOSLEEP
+/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */
+#undef HAVE_NDIR_H
+
/* Define to 1 if you have the `select' function. */
#undef HAVE_SELECT
@@ -93,6 +97,14 @@
/* Define to 1 if `st_blksize' is a member of `struct stat'. */
#undef HAVE_STRUCT_STAT_ST_BLKSIZE
+/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'.
+ */
+#undef HAVE_SYS_DIR_H
+
+/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'.
+ */
+#undef HAVE_SYS_NDIR_H
+
/* Define to 1 if you have the <sys/param.h> header file. */
#undef HAVE_SYS_PARAM_H
@@ -108,9 +120,6 @@
/* Define to 1 if you have the <sys/types.h> header file. */
#undef HAVE_SYS_TYPES_H
-/* Define to 1 if you have the <time.h> header file. */
-#undef HAVE_TIME_H
-
/* Define to 1 if you have the <unistd.h> header file. */
#undef HAVE_UNISTD_H
@@ -149,6 +158,9 @@
/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS
+/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+#undef TIME_WITH_SYS_TIME
+
/* Enable extensions on AIX 3, Interix. */
#ifndef _ALL_SOURCE
# undef _ALL_SOURCE
diff --git a/extension/configure b/extension/configure
index 025e2723..2105648d 100755
--- a/extension/configure
+++ b/extension/configure
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for GNU Awk Bundled Extensions 4.1.0.
+# Generated by GNU Autoconf 2.69 for GNU Awk Bundled Extensions 4.1.1.
#
# Report bugs to <bug-gawk@gnu.org>.
#
@@ -590,8 +590,8 @@ MAKEFLAGS=
# Identity of this package.
PACKAGE_NAME='GNU Awk Bundled Extensions'
PACKAGE_TARNAME='gawk-extensions'
-PACKAGE_VERSION='4.1.0'
-PACKAGE_STRING='GNU Awk Bundled Extensions 4.1.0'
+PACKAGE_VERSION='4.1.1'
+PACKAGE_STRING='GNU Awk Bundled Extensions 4.1.1'
PACKAGE_BUGREPORT='bug-gawk@gnu.org'
PACKAGE_URL='http://www.gnu.org/software/gawk-extensions/'
@@ -1333,7 +1333,7 @@ if test "$ac_init_help" = "long"; then
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures GNU Awk Bundled Extensions 4.1.0 to adapt to many kinds of systems.
+\`configure' configures GNU Awk Bundled Extensions 4.1.1 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1403,7 +1403,7 @@ fi
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of GNU Awk Bundled Extensions 4.1.0:";;
+ short | recursive ) echo "Configuration of GNU Awk Bundled Extensions 4.1.1:";;
esac
cat <<\_ACEOF
@@ -1518,7 +1518,7 @@ fi
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-GNU Awk Bundled Extensions configure 4.1.0
+GNU Awk Bundled Extensions configure 4.1.1
generated by GNU Autoconf 2.69
Copyright (C) 2012 Free Software Foundation, Inc.
@@ -1990,7 +1990,7 @@ cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by GNU Awk Bundled Extensions $as_me 4.1.0, which was
+It was created by GNU Awk Bundled Extensions $as_me 4.1.1, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
@@ -4172,7 +4172,7 @@ fi
# Define the identity of the package.
PACKAGE='gawk-extensions'
- VERSION='4.1.0'
+ VERSION='4.1.1'
cat >>confdefs.h <<_ACEOF
@@ -14034,7 +14034,7 @@ pkgextensiondir='${libdir}/gawk'
if test "$GCC" = yes
then
- CFLAGS="$CFLAGS -Wall -Wextra"
+ CFLAGS="$CFLAGS -Wall" # Don't add -Wextra, hurts older gcc
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for special development options" >&5
@@ -14052,6 +14052,177 @@ else
$as_echo "no" >&6; }
fi
+for ac_header in fnmatch.h limits.h sys/time.h sys/select.h sys/param.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+ac_header_dirent=no
+for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do
+ as_ac_Header=`$as_echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh`
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_hdr that defines DIR" >&5
+$as_echo_n "checking for $ac_hdr that defines DIR... " >&6; }
+if eval \${$as_ac_Header+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <$ac_hdr>
+
+int
+main ()
+{
+if ((DIR *) 0)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$as_ac_Header=yes"
+else
+ eval "$as_ac_Header=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$as_ac_Header
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_hdr" | $as_tr_cpp` 1
+_ACEOF
+
+ac_header_dirent=$ac_hdr; break
+fi
+
+done
+# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
+if test $ac_header_dirent = dirent.h; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5
+$as_echo_n "checking for library containing opendir... " >&6; }
+if ${ac_cv_search_opendir+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char opendir ();
+int
+main ()
+{
+return opendir ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' dir; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_search_opendir=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if ${ac_cv_search_opendir+:} false; then :
+ break
+fi
+done
+if ${ac_cv_search_opendir+:} false; then :
+
+else
+ ac_cv_search_opendir=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5
+$as_echo "$ac_cv_search_opendir" >&6; }
+ac_res=$ac_cv_search_opendir
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5
+$as_echo_n "checking for library containing opendir... " >&6; }
+if ${ac_cv_search_opendir+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char opendir ();
+int
+main ()
+{
+return opendir ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' x; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_search_opendir=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if ${ac_cv_search_opendir+:} false; then :
+ break
+fi
+done
+if ${ac_cv_search_opendir+:} false; then :
+
+else
+ ac_cv_search_opendir=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5
+$as_echo "$ac_cv_search_opendir" >&6; }
+ac_res=$ac_cv_search_opendir
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether sys/types.h defines makedev" >&5
$as_echo_n "checking whether sys/types.h defines makedev... " >&6; }
if ${ac_cv_header_sys_types_h_makedev+:} false; then :
@@ -14102,18 +14273,40 @@ fi
fi
fi
-for ac_header in dirent.h fnmatch.h limits.h time.h sys/time.h sys/select.h sys/param.h
-do :
- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5
+$as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; }
+if ${ac_cv_header_time+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/time.h>
+#include <time.h>
+int
+main ()
+{
+if ((struct tm *) 0)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_time=yes
+else
+ ac_cv_header_time=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5
+$as_echo "$ac_cv_header_time" >&6; }
+if test $ac_cv_header_time = yes; then
-done
+$as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h
+
+fi
for ac_func in fdopendir fnmatch gettimeofday \
@@ -14824,7 +15017,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by GNU Awk Bundled Extensions $as_me 4.1.0, which was
+This file was extended by GNU Awk Bundled Extensions $as_me 4.1.1, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -14892,7 +15085,7 @@ _ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-GNU Awk Bundled Extensions config.status 4.1.0
+GNU Awk Bundled Extensions config.status 4.1.1
configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"
diff --git a/extension/configure.ac b/extension/configure.ac
index 412fec09..1f876a0e 100644
--- a/extension/configure.ac
+++ b/extension/configure.ac
@@ -1,7 +1,7 @@
dnl
dnl configure.ac --- autoconf input file for gawk
dnl
-dnl Copyright (C) 2012, 2013 the Free Software Foundation, Inc.
+dnl Copyright (C) 2012-2014 the Free Software Foundation, Inc.
dnl
dnl This file is part of GAWK, the GNU implementation of the
dnl AWK Programming Language.
@@ -23,7 +23,7 @@ dnl
dnl Process this file with autoconf to produce a configure script.
-AC_INIT([GNU Awk Bundled Extensions], 4.1.0, bug-gawk@gnu.org, gawk-extensions)
+AC_INIT([GNU Awk Bundled Extensions], 4.1.1, bug-gawk@gnu.org, gawk-extensions)
AC_CONFIG_MACRO_DIR([m4])
AC_CONFIG_AUX_DIR([build-aux])
@@ -51,7 +51,7 @@ AC_SUBST([pkgextensiondir], ['${libdir}/gawk'])
if test "$GCC" = yes
then
- CFLAGS="$CFLAGS -Wall -Wextra"
+ CFLAGS="$CFLAGS -Wall" # Don't add -Wextra, hurts older gcc
fi
AC_MSG_CHECKING([for special development options])
@@ -66,8 +66,10 @@ else
AC_MSG_RESULT([no])
fi
+AC_CHECK_HEADERS(fnmatch.h limits.h sys/time.h sys/select.h sys/param.h)
+AC_HEADER_DIRENT
AC_HEADER_MAJOR
-AC_CHECK_HEADERS(dirent.h fnmatch.h limits.h time.h sys/time.h sys/select.h sys/param.h)
+AC_HEADER_TIME
AC_CHECK_FUNCS(fdopendir fnmatch gettimeofday \
getdtablesize nanosleep select GetSystemTimeAsFileTime)
diff --git a/extension/filefuncs.c b/extension/filefuncs.c
index 61cadfec..d5249a4e 100644
--- a/extension/filefuncs.c
+++ b/extension/filefuncs.c
@@ -9,7 +9,7 @@
*/
/*
- * Copyright (C) 2001, 2004, 2005, 2010, 2011, 2012, 2013
+ * Copyright (C) 2001, 2004, 2005, 2010, 2011, 2012, 2013, 2014
* the Free Software Foundation, Inc.
*
* This file is part of GAWK, the GNU implementation of the
@@ -36,6 +36,34 @@
#define _BSD_SOURCE
+#ifdef __VMS
+#if (__CRTL_VER >= 70200000) && !defined (__VAX)
+#define _LARGEFILE 1
+#endif
+
+#ifndef __VAX
+#ifdef __CRTL_VER
+#if __CRTL_VER >= 80200000
+#define _USE_STD_STAT 1
+#endif
+#endif
+#endif
+#define _POSIX_C_SOURCE 1
+#define _XOPEN_SOURCE 1
+#include <stat.h>
+#ifndef S_ISVTX
+#define S_ISVTX (0)
+#endif
+#ifndef major
+#define major(s) (s)
+#endif
+#ifndef minor
+#define minor(s) (0)
+#endif
+#include <unixlib.h>
+#endif
+
+
#include <stdio.h>
#include <assert.h>
#include <errno.h>
@@ -256,7 +284,7 @@ read_symlink(const char *fname, size_t bufsize, ssize_t *linksize)
returns -1 with errno == ERANGE if the buffer is
too small. */
if (errno != ERANGE) {
- free(buf);
+ gawk_free(buf);
return NULL;
}
}
@@ -265,7 +293,7 @@ read_symlink(const char *fname, size_t bufsize, ssize_t *linksize)
buf[*linksize] = '\0';
return buf;
}
- free(buf);
+ gawk_free(buf);
if (bufsize <= MAXSIZE/2)
bufsize *= 2;
else if (bufsize < MAXSIZE)
@@ -826,7 +854,7 @@ do_fts(int nargs, awk_value_t *result)
out:
if (pathvector != NULL)
- free(pathvector);
+ gawk_free(pathvector);
if (path_array != NULL)
(void) release_flattened_array(pathlist.array_cookie, path_array);
diff --git a/extension/fnmatch.c b/extension/fnmatch.c
index a67bc25f..a85bcc78 100644
--- a/extension/fnmatch.c
+++ b/extension/fnmatch.c
@@ -45,15 +45,29 @@
#define _(msgid) gettext(msgid)
#define N_(msgid) msgid
+#ifdef __VMS
+#define __iswctype iswctype
+#define __btowc btowc
+#endif
+
#define _GNU_SOURCE 1 /* use GNU extensions if they're there */
#ifdef HAVE_FNMATCH_H
#include <fnmatch.h>
#else
+#ifdef __VMS
+#include "fnmatch.h" /* version that comes with gawk */
+#else
#include "../missing_d/fnmatch.h" /* version that comes with gawk */
#endif
+#define HAVE_FNMATCH_H
+#endif
#ifndef HAVE_FNMATCH
+#ifdef __VMS
+#include "fnmatch.c" /* ditto */
+#else
#include "../missing_d/fnmatch.c" /* ditto */
+#endif
#define HAVE_FNMATCH
#endif
diff --git a/extension/gawkdirfd.h b/extension/gawkdirfd.h
index a3a2b6a6..d1edf65f 100644
--- a/extension/gawkdirfd.h
+++ b/extension/gawkdirfd.h
@@ -35,7 +35,11 @@
* Unlike the main gawk code base, this include is NOT dependant
* upon MinGW or EMX.
*/
+#ifndef __VMS
#include "../nonposix.h"
+#else
+#include "nonposix.h"
+#endif
#ifndef DIR_TO_FD
# define DIR_TO_FD(d) (FAKE_FD_VALUE)
diff --git a/extension/gawkfts.c b/extension/gawkfts.c
index 81803b88..4a712153 100644
--- a/extension/gawkfts.c
+++ b/extension/gawkfts.c
@@ -43,11 +43,11 @@ static char sccsid[] = "@(#)fts.c 8.6 (Berkeley) 8/14/94";
#include <limits.h>
/* #include "namespace.h" */
-#ifndef ZOS_USS
+#ifdef HAVE_SYS_PARAM_H
#include <sys/param.h>
#else
#include <stdio.h>
-#endif /* ZOS_USS */
+#endif
#include <sys/stat.h>
#include <assert.h>
@@ -139,6 +139,10 @@ static int fts_safe_changedir(const FTS *, const FTSENT *, int,
#define _DIAGASSERT(expression)
+#ifndef MAXPATHLEN
+#define MAXPATHLEN 1024 /* a guess */
+#endif
+
FTS *
fts_open(char * const *argv, int options,
int (*compar)(const FTSENT **, const FTSENT **))
diff --git a/extension/inplace.c b/extension/inplace.c
index 91b1a229..e2f8b73f 100644
--- a/extension/inplace.c
+++ b/extension/inplace.c
@@ -3,7 +3,7 @@
*/
/*
- * Copyright (C) 2013 the Free Software Foundation, Inc.
+ * Copyright (C) 2013, 2014 the Free Software Foundation, Inc.
*
* This file is part of GAWK, the GNU implementation of the
* AWK Programming Language.
@@ -96,7 +96,7 @@ at_exit(void *data, int exit_status)
(void) exit_status; /* silence warnings */
if (state.tname) {
unlink(state.tname);
- free(state.tname);
+ gawk_free(state.tname);
state.tname = NULL;
}
}
@@ -242,7 +242,7 @@ do_inplace_end(int nargs, awk_value_t *result)
if (link(filename.str_value.str, bakname) < 0)
fatal(ext_id, _("inplace_end: link(`%s', `%s') failed (%s)"),
filename.str_value.str, bakname, strerror(errno));
- free(bakname);
+ gawk_free(bakname);
}
#ifdef __MINGW32__
@@ -252,7 +252,7 @@ do_inplace_end(int nargs, awk_value_t *result)
if (rename(state.tname, filename.str_value.str) < 0)
fatal(ext_id, _("inplace_end: rename(`%s', `%s') failed (%s)"),
state.tname, filename.str_value.str, strerror(errno));
- free(state.tname);
+ gawk_free(state.tname);
state.tname = NULL;
return make_number(0, result);
}
diff --git a/extension/m4/ChangeLog b/extension/m4/ChangeLog
index 821ef9ed..349bbcc8 100644
--- a/extension/m4/ChangeLog
+++ b/extension/m4/ChangeLog
@@ -1,3 +1,7 @@
+2014-04-08 Arnold D. Robbins <arnold@skeeve.com>
+
+ * 4.1.1: Release tar ball made.
+
2013-12-21 Arnold D. Robbins <arnold@skeeve.com>
* libtool.m4, ltoptions.m4, ltversion.m4: Update to
diff --git a/extension/readdir.c b/extension/readdir.c
index 91296801..7bcabcb0 100644
--- a/extension/readdir.c
+++ b/extension/readdir.c
@@ -10,7 +10,7 @@
*/
/*
- * Copyright (C) 2012, 2013 the Free Software Foundation, Inc.
+ * Copyright (C) 2012-2014 the Free Software Foundation, Inc.
*
* This file is part of GAWK, the GNU implementation of the
* AWK Programming Language.
@@ -67,6 +67,10 @@
#define _(msgid) gettext(msgid)
#define N_(msgid) msgid
+#ifndef PATH_MAX
+#define PATH_MAX 1024 /* a good guess */
+#endif
+
static const gawk_api_t *api; /* for convenience macros to work */
static awk_ext_id_t *ext_id;
static const char *ext_version = "readdir extension: version 1.0";
@@ -235,8 +239,8 @@ dir_close(awk_input_buf_t *iobuf)
the_dir = (open_directory_t *) iobuf->opaque;
closedir(the_dir->dp);
- free(the_dir->buf);
- free(the_dir);
+ gawk_free(the_dir->buf);
+ gawk_free(the_dir);
iobuf->fd = -1;
}
diff --git a/extension/readfile.3am b/extension/readfile.3am
index 688d9cd5..0cb2eb5b 100644
--- a/extension/readfile.3am
+++ b/extension/readfile.3am
@@ -1,4 +1,4 @@
-.TH READFILE 3am "Jan 15 2013" "Free Software Foundation" "GNU Awk Extension Modules"
+.TH READFILE 3am "Mar 24 2013" "Free Software Foundation" "GNU Awk Extension Modules"
.SH NAME
readfile \- return the entire contents of a file as a string
.SH SYNOPSIS
@@ -6,6 +6,14 @@ readfile \- return the entire contents of a file as a string
@load "readfile"
.sp
result = readfile("/some/path")
+.sp
+.ft R
+For making whole files be single records:
+.sp
+.ft CW
+@load "readfile"
+.br
+BEGIN { PROCINFO["readfile"] = 1 }
.ft R
.SH DESCRIPTION
The
@@ -18,6 +26,14 @@ the requested file.
.PP
Upon error, the function returns the empty string and sets
.BR ERRNO .
+.PP
+In addition, it adds an input parser that is activated if
+.ft CW
+PROCINFO["readfile"]
+.ft R
+exists.
+When activated, each input file is returned in its entirety as \f(CW$0\fR.
+\f(CWRT\fP is set to the null string.
... .SH NOTES
... .SH BUGS
.SH EXAMPLE
@@ -47,7 +63,7 @@ if (contents == "" && ERRNO != "") {
Arnold Robbins,
.BR arnold@skeeve.com .
.SH COPYING PERMISSIONS
-Copyright \(co 2012, 2013,
+Copyright \(co 2012, 2013, 2014,
Free Software Foundation, Inc.
.PP
Permission is granted to make and distribute verbatim copies of
diff --git a/extension/readfile.c b/extension/readfile.c
index 06889c3d..d4b4aef9 100644
--- a/extension/readfile.c
+++ b/extension/readfile.c
@@ -8,10 +8,11 @@
* Revised for new dynamic function facilities
* Mon Jun 14 14:53:07 IDT 2004
* Revised for formal API May 2012
+ * Added input parser March 2014
*/
/*
- * Copyright (C) 2002, 2003, 2004, 2011, 2012, 2013
+ * Copyright (C) 2002, 2003, 2004, 2011, 2012, 2013, 2014
* the Free Software Foundation, Inc.
*
* This file is part of GAWK, the GNU implementation of the
@@ -61,11 +62,39 @@
static const gawk_api_t *api; /* for convenience macros to work */
static awk_ext_id_t *ext_id;
-static const char *ext_version = "readfile extension: version 1.0";
-static awk_bool_t (*init_func)(void) = NULL;
+static const char *ext_version = "readfile extension: version 2.0";
+static awk_bool_t init_readfile();
+static awk_bool_t (*init_func)(void) = init_readfile;
int plugin_is_GPL_compatible;
+/* read_file_to_buffer --- handle the mechanics of reading the file */
+
+static char *
+read_file_to_buffer(int fd, const struct stat *sbuf)
+{
+ char *text = NULL;
+ int ret;
+
+ if ((sbuf->st_mode & S_IFMT) != S_IFREG) {
+ errno = EINVAL;
+ update_ERRNO_int(errno);
+ goto done;
+ }
+
+ emalloc(text, char *, sbuf->st_size + 2, "do_readfile");
+ memset(text, '\0', sbuf->st_size + 2);
+
+ if ((ret = read(fd, text, sbuf->st_size)) != sbuf->st_size) {
+ update_ERRNO_int(errno);
+ gawk_free(text);
+ text = NULL;
+ /* fall through to return */
+ }
+done:
+ return text;
+}
+
/* do_readfile --- read a file into memory */
static awk_value_t *
@@ -90,10 +119,6 @@ do_readfile(int nargs, awk_value_t *result)
if (ret < 0) {
update_ERRNO_int(errno);
goto done;
- } else if ((sbuf.st_mode & S_IFMT) != S_IFREG) {
- errno = EINVAL;
- update_ERRNO_int(errno);
- goto done;
}
if ((fd = open(filename.str_value.str, O_RDONLY|O_BINARY)) < 0) {
@@ -101,15 +126,9 @@ do_readfile(int nargs, awk_value_t *result)
goto done;
}
- emalloc(text, char *, sbuf.st_size + 2, "do_readfile");
- memset(text, '\0', sbuf.st_size + 2);
-
- if ((ret = read(fd, text, sbuf.st_size)) != sbuf.st_size) {
- (void) close(fd);
- update_ERRNO_int(errno);
- free(text);
- goto done;
- }
+ text = read_file_to_buffer(fd, & sbuf);
+ if (text == NULL)
+ goto done; /* ERRNO already updated */
close(fd);
make_malloced_string(text, sbuf.st_size, result);
@@ -117,12 +136,110 @@ do_readfile(int nargs, awk_value_t *result)
} else if (do_lint)
lintwarn(ext_id, _("readfile: called with no arguments"));
-
done:
/* Set the return value */
return result;
}
+/* readfile_get_record --- read the whole file as one record */
+
+static int
+readfile_get_record(char **out, awk_input_buf_t *iobuf, int *errcode,
+ char **rt_start, size_t *rt_len)
+{
+ char *text;
+
+ /*
+ * The caller sets *errcode to 0, so we should set it only if an
+ * error occurs.
+ */
+
+ if (out == NULL || iobuf == NULL)
+ return EOF;
+
+ if (iobuf->opaque != NULL) {
+ /*
+ * Already read the whole file,
+ * free up stuff and return EOF
+ */
+ gawk_free(iobuf->opaque);
+ iobuf->opaque = NULL;
+ return EOF;
+ }
+
+ /* read file */
+ text = read_file_to_buffer(iobuf->fd, & iobuf->sbuf);
+ if (text == NULL)
+ return EOF;
+
+ /* set up the iobuf for next time */
+ iobuf->opaque = text;
+
+ /* set return values */
+ *rt_start = NULL;
+ *rt_len = 0;
+ *out = text;
+
+ /* return count */
+ return iobuf->sbuf.st_size;
+}
+
+/* readfile_can_take_file --- return true if we want the file */
+
+static awk_bool_t
+readfile_can_take_file(const awk_input_buf_t *iobuf)
+{
+ awk_value_t array, index, value;
+
+ if (iobuf == NULL)
+ return awk_false;
+
+ /*
+ * This could fail if PROCINFO isn't referenced from
+ * the awk program. It's not a "can't happen" error.
+ */
+ if (! sym_lookup("PROCINFO", AWK_ARRAY, & array)) {
+ return awk_false;
+ }
+
+ (void) make_const_string("readfile", 8, & index);
+
+ if (! get_array_element(array.array_cookie, & index, AWK_UNDEFINED, & value)) {
+ return awk_false;
+ }
+
+ return awk_true;
+}
+
+/* readfile_take_control_of --- take over the file */
+
+static awk_bool_t
+readfile_take_control_of(awk_input_buf_t *iobuf)
+{
+ if (iobuf == NULL)
+ return awk_false;
+
+ iobuf->get_record = readfile_get_record;
+ return awk_true;
+}
+
+static awk_input_parser_t readfile_parser = {
+ "readfile",
+ readfile_can_take_file,
+ readfile_take_control_of,
+ NULL
+};
+
+/* init_readfile --- set things up */
+
+static awk_bool_t
+init_readfile()
+{
+ register_input_parser(& readfile_parser);
+
+ return awk_true;
+}
+
static awk_ext_func_t func_table[] = {
{ "readfile", do_readfile, 1 },
};
diff --git a/extension/revtwoway.c b/extension/revtwoway.c
index 5f490825..c0d9381a 100644
--- a/extension/revtwoway.c
+++ b/extension/revtwoway.c
@@ -7,7 +7,7 @@
*/
/*
- * Copyright (C) 2012, 2013 the Free Software Foundation, Inc.
+ * Copyright (C) 2012-2014 the Free Software Foundation, Inc.
*
* This file is part of GAWK, the GNU implementation of the
* AWK Programming Language.
@@ -119,8 +119,8 @@ close_two_proc_data(two_way_proc_data_t *proc_data)
return;
}
- free(proc_data->data);
- free(proc_data);
+ gawk_free(proc_data->data);
+ gawk_free(proc_data);
}
/*
diff --git a/extension/rwarray.c b/extension/rwarray.c
index 6185000b..aa05a0d5 100644
--- a/extension/rwarray.c
+++ b/extension/rwarray.c
@@ -7,7 +7,7 @@
*/
/*
- * Copyright (C) 2009, 2010, 2011, 2012, 2013 the Free Software Foundation, Inc.
+ * Copyright (C) 2009-2014 the Free Software Foundation, Inc.
*
* This file is part of GAWK, the GNU implementation of the
* AWK Programming Language.
@@ -408,7 +408,7 @@ read_elem(FILE *fp, awk_element_t *element)
buflen = index_len;
} else if (buflen < index_len) {
/* reallocate buffer */
- char *cp = realloc(buffer, index_len);
+ char *cp = gawk_realloc(buffer, index_len);
if (cp == NULL)
return awk_false;
@@ -468,11 +468,11 @@ read_value(FILE *fp, awk_value_t *value)
len = ntohl(len);
value->val_type = AWK_STRING;
value->str_value.len = len;
- value->str_value.str = malloc(len + 2);
+ value->str_value.str = gawk_malloc(len + 2);
memset(value->str_value.str, '\0', len + 2);
if (fread(value->str_value.str, 1, len, fp) != (ssize_t) len) {
- free(value->str_value.str);
+ gawk_free(value->str_value.str);
return awk_false;
}
}
diff --git a/extension/testext.c b/extension/testext.c
index d11272b8..2dda339f 100644
--- a/extension/testext.c
+++ b/extension/testext.c
@@ -3,7 +3,7 @@
*/
/*
- * Copyright (C) 2012, 2013
+ * Copyright (C) 2012, 2013, 2014
* the Free Software Foundation, Inc.
*
* This file is part of GAWK, the GNU implementation of the
@@ -237,8 +237,8 @@ try_modify_environ(int nargs, awk_value_t *result)
printf("try_modify_environ: set_array_element of ENVIRON passed\n");
} else {
printf("try_modify_environ: set_array_element of ENVIRON failed\n");
- free(index.str_value.str);
- free(value.str_value.str);
+ gawk_free(index.str_value.str);
+ gawk_free(value.str_value.str);
}
if (! flatten_array(environ_array, & flat_array)) {
diff --git a/extension/time.c b/extension/time.c
index 9fadfe54..e6b2b39f 100644
--- a/extension/time.c
+++ b/extension/time.c
@@ -1,25 +1,24 @@
/*
* time.c - Builtin functions that provide time-related functions.
- *
*/
/*
- * Copyright (C) 2012, 2013
+ * Copyright (C) 2012, 2013, 2014
* the Free Software Foundation, Inc.
- *
+ *
* This file is part of GAWK, the GNU implementation of the
* AWK Programming Language.
- *
+ *
* GAWK is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
- *
+ *
* GAWK is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
+ *
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
@@ -39,6 +38,40 @@
#include <sys/types.h>
#include <sys/stat.h>
+#ifdef __VMS
+#define HAVE_NANOSLEEP
+#define HAVE_GETTIMEOFDAY
+#ifdef gettimeofday
+#undef gettimeofday
+#endif
+#ifdef __ia64__
+/* nanosleep not working correctly on IA64 */
+static int
+vms_fake_nanosleep(struct timespec *rqdly, struct timespec *rmdly)
+{
+ int result;
+ struct timespec mtime1, mtime2;
+
+ result = nanosleep(rqdly, &mtime1);
+ if (result == 0)
+ return 0;
+
+ /* On IA64 it returns 100 nanoseconds early with an error */
+ if ((mtime1.tv_sec == 0) && (mtime1.tv_nsec <= 100)) {
+ mtime1.tv_nsec += 100;
+ result = nanosleep(&mtime1, &mtime2);
+ if (result == 0)
+ return 0;
+ if ((mtime2.tv_sec == 0) && (mtime2.tv_nsec <= 100)) {
+ return 0;
+ }
+ }
+ return result;
+}
+#define nanosleep(x,y) vms_fake_nanosleep(x, y)
+#endif
+#endif
+
#include "gawkapi.h"
#include "gettext.h"
@@ -52,15 +85,13 @@ static awk_bool_t (*init_func)(void) = NULL;
int plugin_is_GPL_compatible;
+#include <time.h>
#if defined(HAVE_GETTIMEOFDAY) && defined(HAVE_SYS_TIME_H)
#include <sys/time.h>
#endif
#if defined(HAVE_SELECT) && defined(HAVE_SYS_SELECT_H)
#include <sys/select.h>
#endif
-#if defined(HAVE_NANOSLEEP) && defined(HAVE_TIME_H)
-#include <time.h>
-#endif
#if defined(HAVE_GETSYSTEMTIMEASFILETIME)
#define WIN32_LEAN_AND_MEAN
#include <windows.h>
generated by cgit v1.2.3 (git 2.25.1) at 2025-05-08 23:27:48 +0000