diff options
Diffstat (limited to 'plugins/imdoor')
| -rw-r--r-- | plugins/imdoor/Makefile.am | 6 | ||||
| -rw-r--r-- | plugins/imdoor/imdoor.c | 430 | ||||
| -rw-r--r-- | plugins/imdoor/sun_cddl.c | 592 |
3 files changed, 0 insertions, 1028 deletions
diff --git a/plugins/imdoor/Makefile.am b/plugins/imdoor/Makefile.am deleted file mode 100644 index 6ad7a904..00000000 --- a/plugins/imdoor/Makefile.am +++ /dev/null @@ -1,6 +0,0 @@ -pkglib_LTLIBRARIES = imdoor.la - -imdoor_la_SOURCES = imdoor.c sun_cddl.c -imdoor_la_CPPFLAGS = -I$(top_srcdir) $(PTHREADS_CFLAGS) $(RSRT_CFLAGS) -imdoor_la_LDFLAGS = -module -avoid-version -imdoor_la_LIBADD = diff --git a/plugins/imdoor/imdoor.c b/plugins/imdoor/imdoor.c deleted file mode 100644 index 83890d03..00000000 --- a/plugins/imdoor/imdoor.c +++ /dev/null @@ -1,430 +0,0 @@ -/* imdoor.c - * This input module is used to receive syslog messages via the Solaris - * door mechanism. Not surprisingly, it most probably can not be built - * on other platforms. - * - * NOTE: read comments in module-template.h to understand how this file - * works! - * - * File begun on 2010-03-26 by RGerhards - * - * Copyright 2010 Rainer Gerhards and Adiscon GmbH. - * - * This file is part of rsyslog. - * - * Rsyslog is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * Rsyslog is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with Rsyslog. If not, see <http://www.gnu.org/licenses/>. - * - * A copy of the GPL can be found in the file "COPYING" in this distribution. - */ -#include "config.h" -#include "rsyslog.h" -#include <stdlib.h> -#include <stdio.h> -#include <assert.h> -#include <string.h> -#include <errno.h> -#include <unistd.h> -#include <sys/stat.h> -#include <sys/un.h> -#include "dirty.h" -#include "cfsysline.h" -#include "unicode-helper.h" -#include "module-template.h" -#include "srUtils.h" -#include "errmsg.h" -#include "net.h" -#include "glbl.h" -#include "msg.h" -#include "prop.h" - -MODULE_TYPE_INPUT - -/* defines */ -#define MAXFUNIX 20 -#ifndef _PATH_LOG -#ifdef BSD -#define _PATH_LOG "/var/run/log" -#else -#define _PATH_LOG "/dev/log" -#endif -#endif - - -/* handle some defines missing on more than one platform */ -#ifndef SUN_LEN -#define SUN_LEN(su) \ - (sizeof(*(su)) - sizeof((su)->sun_path) + strlen((su)->sun_path)) -#endif -/* Module static data */ -DEF_IMOD_STATIC_DATA -DEFobjCurrIf(errmsg) -DEFobjCurrIf(glbl) -DEFobjCurrIf(prop) - -static prop_t *pInputName = NULL; /* our inputName currently is always "imuxsock", and this will hold it */ -static int startIndexUxLocalSockets; /* process funix from that index on (used to - * suppress local logging. rgerhards 2005-08-01 - * read-only after startup - */ -static int funixParseHost[MAXFUNIX] = { 0, }; /* should parser parse host name? read-only after startup */ -static int funixFlags[MAXFUNIX] = { IGNDATE, }; /* should parser parse host name? read-only after startup */ -static uchar *funixn[MAXFUNIX] = { (uchar*) _PATH_LOG }; /* read-only after startup */ -static uchar *funixHName[MAXFUNIX] = { NULL, }; /* host-name override - if set, use this instead of actual name */ -static int funixFlowCtl[MAXFUNIX] = { eFLOWCTL_NO_DELAY, }; /* flow control settings for this socket */ -static int funix[MAXFUNIX] = { -1, }; /* read-only after startup */ -static int nfunix = 1; /* number of Unix sockets open / read-only after startup */ - -/* config settings */ -static int bOmitLocalLogging = 0; -static uchar *pLogSockName = NULL; -static uchar *pLogHostName = NULL; /* host name to use with this socket */ -static int bUseFlowCtl = 0; /* use flow control or not (if yes, only LIGHT is used! */ -static int bIgnoreTimestamp = 1; /* ignore timestamps present in the incoming message? */ - - -/* set the timestamp ignore / not ignore option for the system - * log socket. This must be done separtely, as it is not added via a command - * but present by default. -- rgerhards, 2008-03-06 - */ -static rsRetVal setSystemLogTimestampIgnore(void __attribute__((unused)) *pVal, int iNewVal) -{ - DEFiRet; - funixFlags[0] = iNewVal ? IGNDATE : NOFLAG; - RETiRet; -} - -/* set flowcontrol for the system log socket - */ -static rsRetVal setSystemLogFlowControl(void __attribute__((unused)) *pVal, int iNewVal) -{ - DEFiRet; - funixFlowCtl[0] = iNewVal ? eFLOWCTL_LIGHT_DELAY : eFLOWCTL_NO_DELAY; - RETiRet; -} - -/* add an additional listen socket. Socket names are added - * until the array is filled up. It is never reset, only at - * module unload. - * TODO: we should change the array to a list so that we - * can support any number of listen socket names. - * rgerhards, 2007-12-20 - * added capability to specify hostname for socket -- rgerhards, 2008-08-01 - */ -static rsRetVal addLstnSocketName(void __attribute__((unused)) *pVal, uchar *pNewVal) -{ - if(nfunix < MAXFUNIX) { - if(*pNewVal == ':') { - funixParseHost[nfunix] = 1; - } - else { - funixParseHost[nfunix] = 0; - } - funixHName[nfunix] = pLogHostName; - pLogHostName = NULL; /* re-init for next, not freed because funixHName[] now owns it */ - funixFlowCtl[nfunix] = bUseFlowCtl ? eFLOWCTL_LIGHT_DELAY : eFLOWCTL_NO_DELAY; - funixFlags[nfunix] = bIgnoreTimestamp ? IGNDATE : NOFLAG; - funixn[nfunix++] = pNewVal; - } - else { - errmsg.LogError(0, NO_ERRCODE, "Out of unix socket name descriptors, ignoring %s\n", - pNewVal); - } - - return RS_RET_OK; -} - -/* free the funixn[] socket names - needed as cleanup on several places - * note that nfunix is NOT reset! funixn[0] is never freed, as it comes from - * the constant memory pool - and if not, it is freeed via some other pointer. - */ -static rsRetVal discardFunixn(void) -{ - int i; - - for (i = 1; i < nfunix; i++) { - if(funixn[i] != NULL) { - free(funixn[i]); - funixn[i] = NULL; - } - if(funixHName[i] != NULL) { - free(funixHName[i]); - funixHName[i] = NULL; - } - } - - return RS_RET_OK; -} - - -static int create_unix_socket(const char *path) -{ - struct sockaddr_un sunx; - int fd; - - if (path[0] == '\0') - return -1; - - unlink(path); - - memset(&sunx, 0, sizeof(sunx)); - sunx.sun_family = AF_UNIX; - (void) strncpy(sunx.sun_path, path, sizeof(sunx.sun_path)); - fd = socket(AF_UNIX, SOCK_DGRAM, 0); - if (fd < 0 || bind(fd, (struct sockaddr *) &sunx, SUN_LEN(&sunx)) < 0 || - chmod(path, 0666) < 0) { - errmsg.LogError(errno, NO_ERRCODE, "connot create '%s'", path); - dbgprintf("cannot create %s (%d).\n", path, errno); - close(fd); - return -1; - } - return fd; -} - - -/* This function receives data from a socket indicated to be ready - * to receive and submits the message received for processing. - * rgerhards, 2007-12-20 - * Interface changed so that this function is passed the array index - * of the socket which is to be processed. This eases access to the - * growing number of properties. -- rgerhards, 2008-08-01 - */ -static rsRetVal readSocket(int fd, int iSock) -{ - DEFiRet; - int iRcvd; - int iMaxLine; - uchar bufRcv[4096+1]; - uchar *pRcv = NULL; /* receive buffer */ - - assert(iSock >= 0); - - iMaxLine = glbl.GetMaxLine(); - - /* we optimize performance: if iMaxLine is below 4K (which it is in almost all - * cases, we use a fixed buffer on the stack. Only if it is higher, heap memory - * is used. We could use alloca() to achive a similar aspect, but there are so - * many issues with alloca() that I do not want to take that route. - * rgerhards, 2008-09-02 - */ - if((size_t) iMaxLine < sizeof(bufRcv) - 1) { - pRcv = bufRcv; - } else { - CHKmalloc(pRcv = (uchar*) malloc(sizeof(uchar) * (iMaxLine + 1))); - } - - iRcvd = recv(fd, pRcv, iMaxLine, 0); - dbgprintf("Message from UNIX socket: #%d\n", fd); - if (iRcvd > 0) { - parseAndSubmitMessage(funixHName[iSock] == NULL ? glbl.GetLocalHostName() : funixHName[iSock], - (uchar*)"127.0.0.1", pRcv, - iRcvd, funixParseHost[iSock] ? (funixFlags[iSock] | PARSE_HOSTNAME) : funixFlags[iSock], - funixFlowCtl[iSock], pInputName, NULL, 0); - } else if (iRcvd < 0 && errno != EINTR) { - char errStr[1024]; - rs_strerror_r(errno, errStr, sizeof(errStr)); - dbgprintf("UNIX socket error: %d = %s.\n", errno, errStr); - errmsg.LogError(errno, NO_ERRCODE, "recvfrom UNIX"); - } - -finalize_it: - if(pRcv != NULL && (size_t) iMaxLine >= sizeof(bufRcv) - 1) - free(pRcv); - - RETiRet; -} - - -/* This function is called to gather input. */ -BEGINrunInput - int maxfds; - int nfds; - int i; - int fd; - fd_set readfds; -CODESTARTrunInput - /* this is an endless loop - it is terminated when the thread is - * signalled to do so. This, however, is handled by the framework, - * right into the sleep below. - */ - while(1) { - /* Add the Unix Domain Sockets to the list of read - * descriptors. - * rgerhards 2005-08-01: we must now check if there are - * any local sockets to listen to at all. If the -o option - * is given without -a, we do not need to listen at all.. - */ - maxfds = 0; - FD_ZERO (&readfds); - /* Copy master connections */ - for (i = startIndexUxLocalSockets; i < nfunix; i++) { - if (funix[i] != -1) { - FD_SET(funix[i], &readfds); - if (funix[i]>maxfds) maxfds=funix[i]; - } - } - - if(Debug) { - dbgprintf("--------imuxsock calling select, active file descriptors (max %d): ", maxfds); - for (nfds= 0; nfds <= maxfds; ++nfds) - if ( FD_ISSET(nfds, &readfds) ) - dbgprintf("%d ", nfds); - dbgprintf("\n"); - } - - /* wait for io to become ready */ - nfds = select(maxfds+1, (fd_set *) &readfds, NULL, NULL, NULL); - - for (i = 0; i < nfunix && nfds > 0; i++) { - if ((fd = funix[i]) != -1 && FD_ISSET(fd, &readfds)) { - readSocket(fd, i); - --nfds; /* indicate we have processed one */ - } - } - } - - RETiRet; -ENDrunInput - - -BEGINwillRun -CODESTARTwillRun - register int i; - - /* first apply some config settings */ - startIndexUxLocalSockets = bOmitLocalLogging ? 1 : 0; - if(pLogSockName != NULL) - funixn[0] = pLogSockName; - - /* initialize and return if will run or not */ - for (i = startIndexUxLocalSockets ; i < nfunix ; i++) { - if ((funix[i] = create_unix_socket((char*) funixn[i])) != -1) - dbgprintf("Opened UNIX socket '%s' (fd %d).\n", funixn[i], funix[i]); - } - - /* we need to create the inputName property (only once during our lifetime) */ - CHKiRet(prop.Construct(&pInputName)); - CHKiRet(prop.SetString(pInputName, UCHAR_CONSTANT("imuxsock"), sizeof("imuxsock") - 1)); - CHKiRet(prop.ConstructFinalize(pInputName)); - -finalize_it: -ENDwillRun - - -BEGINafterRun -CODESTARTafterRun - int i; - /* do cleanup here */ - /* Close the UNIX sockets. */ - for (i = 0; i < nfunix; i++) - if (funix[i] != -1) - close(funix[i]); - - /* Clean-up files. */ - for (i = 0; i < nfunix; i++) - if (funixn[i] && funix[i] != -1) - unlink((char*) funixn[i]); - /* free no longer needed string */ - if(pLogSockName != NULL) - free(pLogSockName); - if(pLogHostName != NULL) { - free(pLogHostName); - } - - discardFunixn(); - nfunix = 1; - - if(pInputName != NULL) - prop.Destruct(&pInputName); -ENDafterRun - - -BEGINmodExit -CODESTARTmodExit - objRelease(glbl, CORE_COMPONENT); - objRelease(errmsg, CORE_COMPONENT); - objRelease(prop, CORE_COMPONENT); -ENDmodExit - - -BEGINqueryEtryPt -CODESTARTqueryEtryPt -CODEqueryEtryPt_STD_IMOD_QUERIES -ENDqueryEtryPt - -static rsRetVal resetConfigVariables(uchar __attribute__((unused)) *pp, void __attribute__((unused)) *pVal) -{ - bOmitLocalLogging = 0; - if(pLogSockName != NULL) { - free(pLogSockName); - pLogSockName = NULL; - } - if(pLogHostName != NULL) { - free(pLogHostName); - pLogHostName = NULL; - } - - discardFunixn(); - nfunix = 1; - bIgnoreTimestamp = 1; - bUseFlowCtl = 0; - - return RS_RET_OK; -} - - -BEGINmodInit() - int i; -CODESTARTmodInit - *ipIFVersProvided = CURR_MOD_IF_VERSION; /* we only support the current interface specification */ -CODEmodInit_QueryRegCFSLineHdlr - CHKiRet(objUse(errmsg, CORE_COMPONENT)); - CHKiRet(objUse(glbl, CORE_COMPONENT)); - CHKiRet(objUse(prop, CORE_COMPONENT)); - - dbgprintf("imuxsock version %s initializing\n", PACKAGE_VERSION); - - /* initialize funixn[] array */ - for(i = 1 ; i < MAXFUNIX ; ++i) { - funixn[i] = NULL; - funix[i] = -1; - } - - /* register config file handlers */ - CHKiRet(omsdRegCFSLineHdlr((uchar *)"omitlocallogging", 0, eCmdHdlrBinary, - NULL, &bOmitLocalLogging, STD_LOADABLE_MODULE_ID)); - CHKiRet(omsdRegCFSLineHdlr((uchar *)"inputunixlistensocketignoremsgtimestamp", 0, eCmdHdlrBinary, - NULL, &bIgnoreTimestamp, STD_LOADABLE_MODULE_ID)); - CHKiRet(omsdRegCFSLineHdlr((uchar *)"systemlogsocketname", 0, eCmdHdlrGetWord, - NULL, &pLogSockName, STD_LOADABLE_MODULE_ID)); - CHKiRet(omsdRegCFSLineHdlr((uchar *)"inputunixlistensockethostname", 0, eCmdHdlrGetWord, - NULL, &pLogHostName, STD_LOADABLE_MODULE_ID)); - CHKiRet(omsdRegCFSLineHdlr((uchar *)"inputunixlistensocketflowcontrol", 0, eCmdHdlrBinary, - NULL, &bUseFlowCtl, STD_LOADABLE_MODULE_ID)); - CHKiRet(omsdRegCFSLineHdlr((uchar *)"addunixlistensocket", 0, eCmdHdlrGetWord, - addLstnSocketName, NULL, STD_LOADABLE_MODULE_ID)); - CHKiRet(omsdRegCFSLineHdlr((uchar *)"resetconfigvariables", 1, eCmdHdlrCustomHandler, - resetConfigVariables, NULL, STD_LOADABLE_MODULE_ID)); - /* the following one is a (dirty) trick: the system log socket is not added via - * an "addUnixListenSocket" config format. As such, it's properties can not be modified - * via $InputUnixListenSocket*". So we need to add a special directive - * for that. We should revisit all of that once we have the new config format... - * rgerhards, 2008-03-06 - */ - CHKiRet(omsdRegCFSLineHdlr((uchar *)"systemlogsocketignoremsgtimestamp", 0, eCmdHdlrBinary, - setSystemLogTimestampIgnore, NULL, STD_LOADABLE_MODULE_ID)); - CHKiRet(omsdRegCFSLineHdlr((uchar *)"systemlogsocketflowcontrol", 0, eCmdHdlrBinary, - setSystemLogFlowControl, NULL, STD_LOADABLE_MODULE_ID)); -ENDmodInit -/* vim:set ai: - */ diff --git a/plugins/imdoor/sun_cddl.c b/plugins/imdoor/sun_cddl.c deleted file mode 100644 index 8e9714d9..00000000 --- a/plugins/imdoor/sun_cddl.c +++ /dev/null @@ -1,592 +0,0 @@ -#define MAXLINE 4096 -/* - * CDDL HEADER START - * - * The contents of this file are subject to the terms of the - * Common Development and Distribution License (the "License"). - * You may not use this file except in compliance with the License. - * - * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE - * or http://www.opensolaris.org/os/licensing. - * See the License for the specific language governing permissions - * and limitations under the License. - * - * When distributing Covered Code, include this CDDL HEADER in each - * file and include the License file at usr/src/OPENSOLARIS.LICENSE. - * If applicable, add the following below this CDDL HEADER, with the - * fields enclosed by brackets "[]" replaced with your own identifying - * information: Portions Copyright [yyyy] [name of copyright owner] - * - * CDDL HEADER END - */ -/* Portions Copyright 2010 by Rainer Gerhards and Adiscon - */ -/* - * Copyright 2008 Sun Microsystems, Inc. All rights reserved. - * Use is subject to license terms. - */ - -/* - * Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T - * All Rights Reserved - */ - -/* - * University Copyright- Copyright (c) 1982, 1986, 1988 - * The Regents of the University of California - * All Rights Reserved - * - * University Acknowledgment- Portions of this document are derived from - * software developed by the University of California, Berkeley, and its - * contributors. - */ -#include <unistd.h> -#include <note.h> -#include <errno.h> -#include <sys/types.h> -#include <stdio.h> -#include <stdio_ext.h> -#include <stdlib.h> -#include <ctype.h> -#include <signal.h> -#include <string.h> -#include <strings.h> -#include <libscf.h> -#include <netconfig.h> -#include <netdir.h> -#include <pwd.h> -#include <sys/socket.h> -#include <tiuser.h> -#include <utmpx.h> -#include <limits.h> -#include <pthread.h> -#include <fcntl.h> -#include <stropts.h> -#include <assert.h> -#include <sys/statvfs.h> - -#include <sys/param.h> -#include <sys/sysmacros.h> -#include <sys/syslog.h> -#include <sys/strlog.h> -#include <sys/stat.h> -#include <sys/time.h> -#include <sys/utsname.h> -#include <sys/poll.h> -#include <sys/wait.h> -#include <sys/resource.h> -#include <sys/mman.h> -#include <sys/note.h> -#include <door.h> -#include <sys/door.h> - -#include "rsyslog.h" -#include "debug.h" - -#define DOORFILE "/var/run/syslog_door" -#define RELATIVE_DOORFILE "../var/run/syslog_door" -#define OLD_DOORFILE "/etc/.syslog_door" - -static int DoorFd = -1; -static int DoorCreated = 0; -static char *DoorFileName = DOORFILE; - -/* for managing door server threads */ -static pthread_mutex_t door_server_cnt_lock = PTHREAD_MUTEX_INITIALIZER; -static uint_t door_server_cnt = 0; -static pthread_attr_t door_thr_attr; - -/* - * the 'server' function that we export via the door. It does - * nothing but return. - */ -/*ARGSUSED*/ -static void -server(void *cookie, char *argp, size_t arg_size, - door_desc_t *dp, uint_t n) -{ - (void) door_return(NULL, 0, NULL, 0); - /* NOTREACHED */ -} - -/*ARGSUSED*/ -static void * -create_door_thr(void *arg) -{ - (void) pthread_setcancelstate(PTHREAD_CANCEL_DISABLE, NULL); - (void) door_return(NULL, 0, NULL, 0); - - /* - * If there is an error in door_return(), it will return here and - * the thread will exit. Hence we need to decrement door_server_cnt. - */ - (void) pthread_mutex_lock(&door_server_cnt_lock); - door_server_cnt--; - (void) pthread_mutex_unlock(&door_server_cnt_lock); - return (NULL); -} - -/* - * Max number of door server threads for syslogd. Since door is used - * to check the health of syslogd, we don't need large number of - * server threads. - */ -#define MAX_DOOR_SERVER_THR 3 - -/* - * Manage door server thread pool. - */ -/*ARGSUSED*/ -static void -door_server_pool(door_info_t *dip) -{ - (void) pthread_mutex_lock(&door_server_cnt_lock); - if (door_server_cnt <= MAX_DOOR_SERVER_THR && - pthread_create(NULL, &door_thr_attr, create_door_thr, NULL) == 0) { - door_server_cnt++; - (void) pthread_mutex_unlock(&door_server_cnt_lock); - return; - } - - (void) pthread_mutex_unlock(&door_server_cnt_lock); -} - -static void -delete_doorfiles(void) -{ - pthread_t mythreadno; - struct stat sb; - int err; - char line[MAXLINE+1]; - - if (Debug) { - mythreadno = pthread_self(); - } - - - if (lstat(DoorFileName, &sb) == 0 && !S_ISDIR(sb.st_mode)) { - if (unlink(DoorFileName) < 0) { - err = errno; - (void) snprintf(line, sizeof (line), - "unlink() of %s failed - fatal", DoorFileName); - errno = err; - DBGPRINTF("%s", line);//logerror(line); - DBGPRINTF("delete_doorfiles(%u): error: %s, " - "errno=%d\n", mythreadno, line, err); - exit(1); - } - - DBGPRINTF("delete_doorfiles(%u): deleted %s\n", - mythreadno, DoorFileName); - } - - if (strcmp(DoorFileName, DOORFILE) == 0) { - if (lstat(OLD_DOORFILE, &sb) == 0 && !S_ISDIR(sb.st_mode)) { - if (unlink(OLD_DOORFILE) < 0) { - err = errno; - (void) snprintf(line, sizeof (line), - "unlink() of %s failed", OLD_DOORFILE); - DBGPRINTF("delete_doorfiles(%u): %s\n", - mythreadno, line); - - if (err != EROFS) { - errno = err; - (void) strlcat(line, " - fatal", - sizeof (line)); - logerror(line); - DBGPRINTF("delete_doorfiles(%u): " - "error: %s, errno=%d\n", - mythreadno, line, err); - exit(1); - } - - DBGPRINTF("delete_doorfiles(%u): unlink() " - "failure OK on RO file system\n", - mythreadno); - } - - DBGPRINTF("delete_doorfiles(%u): deleted %s\n", - mythreadno, OLD_DOORFILE); - } - } - -#if 0 - if (lstat(PidFileName, &sb) == 0 && !S_ISDIR(sb.st_mode)) { - if (unlink(PidFileName) < 0) { - err = errno; - (void) snprintf(line, sizeof (line), - "unlink() of %s failed - fatal", PidFileName); - errno = err; - logerror(line); - DBGPRINTF("delete_doorfiles(%u): error: %s, " - "errno=%d\n", mythreadno, line, err); - exit(1); - } - - DBGPRINTF("delete_doorfiles(%u): deleted %s\n", mythreadno, - PidFileName); - } - - if (strcmp(PidFileName, PIDFILE) == 0) { - if (lstat(OLD_PIDFILE, &sb) == 0 && !S_ISDIR(sb.st_mode)) { - if (unlink(OLD_PIDFILE) < 0) { - err = errno; - (void) snprintf(line, sizeof (line), - "unlink() of %s failed", OLD_PIDFILE); - DBGPRINTF(5, "delete_doorfiles(%u): %s, \n", - mythreadno, line); - - if (err != EROFS) { - errno = err; - (void) strlcat(line, " - fatal", - sizeof (line)); - logerror(line); - DBGPRINTF(1, "delete_doorfiles(%u): " - "error: %s, errno=%d\n", - mythreadno, line, err); - exit(1); - } - - DBGPRINTF(5, "delete_doorfiles(%u): unlink " - "failure OK on RO file system\n", - mythreadno); - } - - DBGPRINTF(5, "delete_doorfiles(%u): deleted %s\n", - mythreadno, OLD_PIDFILE); - } - } -#endif - - if (DoorFd != -1) { - (void) door_revoke(DoorFd); - } - - DBGPRINTF("delete_doorfiles(%u): revoked door: DoorFd=%d\n", - mythreadno, DoorFd); -} - - -/* - * Create the door file and the pid file in /var/run. If the filesystem - * containing /etc is writable, create symlinks /etc/.syslog_door and - * /etc/syslog.pid to them. On systems that do not support /var/run, create - * /etc/.syslog_door and /etc/syslog.pid directly. - * - * Note: it is not considered fatal to fail to create the pid file or its - * symlink. Attempts to use them in the usual way will fail, of course, but - * syslogd will function nicely without it (not so for the door file). - */ - -static void -sun_open_door(void) -{ - struct stat buf; - door_info_t info; - char line[MAXLINE+1]; - pthread_t mythreadno; - int err; - - if (Debug) { - mythreadno = pthread_self(); - } - - /* - * first see if another syslogd is running by trying - * a door call - if it succeeds, there is already - * a syslogd process active - */ - - if (!DoorCreated) { - int door; - - if ((door = open(DoorFileName, O_RDONLY)) >= 0) { - DBGPRINTF("open_door(%u): %s opened " - "successfully\n", mythreadno, DoorFileName); - - if (door_info(door, &info) >= 0) { - DBGPRINTF("open_door(%u): " - "door_info:info.di_target = %ld\n", - mythreadno, info.di_target); - - if (info.di_target > 0) { - (void) sprintf(line, "syslogd pid %ld" - " already running. Cannot " - "start another syslogd pid %ld", - info.di_target, getpid()); - DBGPRINTF("open_door(%u): error: " - "%s\n", mythreadno, line); - errno = 0; - //logerror(line); - exit(1); - } - } - - (void) close(door); - } else { - if (lstat(DoorFileName, &buf) < 0) { - err = errno; - - DBGPRINTF("open_door(%u): lstat() of %s " - "failed, errno=%d\n", - mythreadno, DoorFileName, err); - - if ((door = creat(DoorFileName, 0644)) < 0) { - err = errno; - (void) snprintf(line, sizeof (line), - "creat() of %s failed - fatal", - DoorFileName); - DBGPRINTF("open_door(%u): error: %s, " - "errno=%d\n", mythreadno, line, - err); - errno = err; - //logerror(line); - delete_doorfiles(); - exit(1); - } - - (void) fchmod(door, - S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH); - - DBGPRINTF("open_door(%u): creat() of %s " - "succeeded\n", mythreadno, - DoorFileName); - - (void) close(door); - } - } - - if (strcmp(DoorFileName, DOORFILE) == 0) { - if (lstat(OLD_DOORFILE, &buf) == 0) { - DBGPRINTF("open_door(%u): lstat() of %s " - "succeeded\n", mythreadno, - OLD_DOORFILE); - - if (S_ISDIR(buf.st_mode)) { - (void) snprintf(line, sizeof (line), - "%s is a directory - fatal", - OLD_DOORFILE); - DBGPRINTF("open_door(%u): error: " - "%s\n", mythreadno, line); - errno = 0; - //logerror(line); - delete_doorfiles(); - exit(1); - } - - DBGPRINTF("open_door(%u): %s is not a " - "directory\n", - mythreadno, OLD_DOORFILE); - - if (unlink(OLD_DOORFILE) < 0) { - err = errno; - (void) snprintf(line, sizeof (line), - "unlink() of %s failed", - OLD_DOORFILE); - DBGPRINTF("open_door(%u): %s\n", - mythreadno, line); - - if (err != EROFS) { - DBGPRINTF("open_door(%u): " - "error: %s, " - "errno=%d\n", - mythreadno, line, err); - (void) strcat(line, " - fatal"); - errno = err; - //logerror(line); - delete_doorfiles(); - exit(1); - } - - DBGPRINTF("open_door(%u): unlink " - "failure OK on RO file " - "system\n", mythreadno); - } - } else { - DBGPRINTF("open_door(%u): file %s doesn't " - "exist\n", mythreadno, OLD_DOORFILE); - } - - if (symlink(RELATIVE_DOORFILE, OLD_DOORFILE) < 0) { - err = errno; - (void) snprintf(line, sizeof (line), - "symlink %s -> %s failed", OLD_DOORFILE, - RELATIVE_DOORFILE); - DBGPRINTF("open_door(%u): %s\n", mythreadno, - line); - - if (err != EROFS) { - DBGPRINTF("open_door(%u): error: %s, " - "errno=%d\n", mythreadno, line, - err); - errno = err; - (void) strcat(line, " - fatal"); - //logerror(line); - delete_doorfiles(); - exit(1); - } - - DBGPRINTF("open_door(%u): symlink failure OK " - "on RO file system\n", mythreadno); - } else { - DBGPRINTF("open_door(%u): symlink %s -> %s " - "succeeded\n", mythreadno, - OLD_DOORFILE, RELATIVE_DOORFILE); - } - } - - if ((DoorFd = door_create(server, 0, - DOOR_REFUSE_DESC)) < 0) { - //???? DOOR_NO_CANEL requires newer libs??? DOOR_REFUSE_DESC | DOOR_NO_CANCEL)) < 0) { - err = errno; - (void) sprintf(line, "door_create() failed - fatal"); - DBGPRINTF("open_door(%u): error: %s, errno=%d\n", - mythreadno, line, err); - errno = err; - //logerror(line); - delete_doorfiles(); - exit(1); - } - //???? (void) door_setparam(DoorFd, DOOR_PARAM_DATA_MAX, 0); - DBGPRINTF("open_door(%u): door_create() succeeded, " - "DoorFd=%d\n", mythreadno, DoorFd); - - DoorCreated = 1; - } - - (void) fdetach(DoorFileName); /* just in case... */ - - (void) door_server_create(door_server_pool); - - if (fattach(DoorFd, DoorFileName) < 0) { - err = errno; - (void) snprintf(line, sizeof (line), "fattach() of fd" - " %d to %s failed - fatal", DoorFd, DoorFileName); - DBGPRINTF("open_door(%u): error: %s, errno=%d\n", mythreadno, - line, err); - errno = err; - //logerror(line); - delete_doorfiles(); - exit(1); - } - - DBGPRINTF("open_door(%u): attached server() to %s\n", mythreadno, - DoorFileName); - -#if 0 - /* - * create pidfile anyway, so those using it to control - * syslogd (with kill `cat /etc/syslog.pid` perhaps) - * don't get broken. - */ - - if (!PidfileCreated) { - int pidfd; - - PidfileCreated = 1; - - if ((pidfd = open(PidFileName, O_RDWR|O_CREAT|O_TRUNC, 0644)) - < 0) { - err = errno; - (void) snprintf(line, sizeof (line), - "open() of %s failed", PidFileName); - DBGPRINTF(1, "open_door(%u): warning: %s, errno=%d\n", - mythreadno, line, err); - errno = err; - //logerror(line); - return; - } - - (void) fchmod(pidfd, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH); - (void) sprintf(line, "%ld\n", getpid()); - - if (write(pidfd, line, strlen(line)) < 0) { - err = errno; - (void) snprintf(line, sizeof (line), - "write to %s on fd %d failed", PidFileName, pidfd); - DBGPRINTF(1, "open_door(%u): warning: %s, errno=%d\n", - mythreadno, line, err); - errno = err; - //logerror(line); - return; - } - - (void) close(pidfd); - - DBGPRINTF("open_door(%u): %s created\n", - mythreadno, PidFileName); - - if (strcmp(PidFileName, PIDFILE) == 0) { - if (lstat(OLD_PIDFILE, &buf) == 0) { - DBGPRINTF("open_door(%u): lstat() of %s " - "succeded\n", mythreadno, OLD_PIDFILE); - - if (S_ISDIR(buf.st_mode)) { - (void) snprintf(line, sizeof (line), - "file %s is a directory", - OLD_PIDFILE); - DBGPRINTF("open_door(%u): warning: " - "%s\n", mythreadno, line); - errno = 0; - //logerror(line); - return; - } - - if (unlink(OLD_PIDFILE) < 0) { - err = errno; - (void) snprintf(line, sizeof (line), - "unlink() of %s failed", - OLD_PIDFILE); - DBGPRINTF("open_door(%u): %s\n", - mythreadno, line); - - if (err != EROFS) { - DBGPRINTF(1, "open_door (%u): " - "warning: %s, " - "errno=%d\n", - mythreadno, line, err); - errno = err; - //logerror(line); - return; - } - - DBGPRINTF(5, "open_door(%u): unlink " - "failure OK on RO file " - "system\n", mythreadno); - } - } else { - DBGPRINTF("open_door(%u): file %s doesn't " - "exist\n", mythreadno, OLD_PIDFILE); - } - - if (symlink(RELATIVE_PIDFILE, OLD_PIDFILE) < 0) { - err = errno; - (void) snprintf(line, sizeof (line), - "symlink %s -> %s failed", OLD_PIDFILE, - RELATIVE_PIDFILE); - DBGPRINTF("open_door(%u): %s\n", mythreadno, - line); - - if (err != EROFS) { - DBGPRINTF(1, "open_door(%u): warning: " - "%s, errno=%d\n", mythreadno, - line, err); - errno = err; - //logerror(line); - return; - } - - DBGPRINTF(5, "open_door(%u): symlink failure OK " - "on RO file system\n", mythreadno); - return; - } - - DBGPRINTF(5, "open_door(%u): symlink %s -> %s " - "succeeded\n", mythreadno, OLD_PIDFILE, - RELATIVE_PIDFILE); - } - } -#endif -} - - |