diff options
Diffstat (limited to 'tests/testsuites')
95 files changed, 949 insertions, 15 deletions
diff --git a/tests/testsuites/1.retry.conf b/tests/testsuites/1.retry.conf new file mode 100644 index 00000000..c464b19c --- /dev/null +++ b/tests/testsuites/1.retry.conf @@ -0,0 +1,2 @@ +<167>Mar 6 16:57:54 172.20.245.8 %PIX-7-710005: UDP request discarded from SERVER1/2741 to test_app:255.255.255.255/61601 +167,Mar 6 16:57:54,172.20.245.8,%PIX-7-710005,%PIX-7-710005:, diff --git a/tests/testsuites/1.tabescape_dflt b/tests/testsuites/1.tabescape_dflt new file mode 100644 index 00000000..91444bd3 --- /dev/null +++ b/tests/testsuites/1.tabescape_dflt @@ -0,0 +1,3 @@ +<167>Mar 6 16:57:54 172.20.245.8 test: before HT after HT (do NOT remove TAB!) + before HT#011after HT (do NOT remove TAB!) +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/1.tabescape_off b/tests/testsuites/1.tabescape_off new file mode 100644 index 00000000..6a331c35 --- /dev/null +++ b/tests/testsuites/1.tabescape_off @@ -0,0 +1,3 @@ +<167>Mar 6 16:57:54 172.20.245.8 test: before HT after HT (do NOT remove TAB!) + before HT after HT (do NOT remove TAB!) +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/4.parse1 b/tests/testsuites/4.parse1 new file mode 100644 index 00000000..07e2445a --- /dev/null +++ b/tests/testsuites/4.parse1 @@ -0,0 +1,4 @@ +<29>Jul 31 21:39:21 example-b example-gw[10538]: disconnect host=/192.0.2.1 destination=192.0.2.2/11282 in=3274 out=1448 duration=0 +29,daemon,notice,Jul 31 21:39:21,example-b,example-gw,example-gw[10538]:, disconnect host=/192.0.2.1 destination=192.0.2.2/11282 in=3274 out=1448 duration=0 +# yet another real-life sample where we had some issues with - the important +# part is the dash inside the hostname! diff --git a/tests/testsuites/8bit.parse1 b/tests/testsuites/8bit.parse1 new file mode 100644 index 00000000..90db6352 --- /dev/null +++ b/tests/testsuites/8bit.parse1 @@ -0,0 +1,2 @@ +<6>AUG 10 22:18:24 host tag This msg contains 8-bit European chars: äöü +6,kern,info,Aug 10 22:18:24,host,tag,tag, This msg contains 8-bit European chars: äöü diff --git a/tests/testsuites/8bit.parse_8bit_escape b/tests/testsuites/8bit.parse_8bit_escape new file mode 100644 index 00000000..b2f6335c --- /dev/null +++ b/tests/testsuites/8bit.parse_8bit_escape @@ -0,0 +1,2 @@ +<6>AUG 10 22:18:24 host tag This msg contains 8-bit European chars: äöü +6,kern,info,Aug 10 22:18:24,host,tag,tag, This msg contains 8-bit European chars: #303#244#303#266#303#274 diff --git a/tests/testsuites/Apr.ts3164 b/tests/testsuites/Apr.ts3164 new file mode 100644 index 00000000..3134f224 --- /dev/null +++ b/tests/testsuites/Apr.ts3164 @@ -0,0 +1,3 @@ +<167>Apr 6 16:57:54 172.20.245.8 TAG: MSG +Apr 6 16:57:54 +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/Aug.ts3164 b/tests/testsuites/Aug.ts3164 new file mode 100644 index 00000000..d9a721eb --- /dev/null +++ b/tests/testsuites/Aug.ts3164 @@ -0,0 +1,3 @@ +<167>Aug 6 16:57:54 172.20.245.8 TAG: MSG +Aug 6 16:57:54 +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/Dec.ts3164 b/tests/testsuites/Dec.ts3164 new file mode 100644 index 00000000..080ba401 --- /dev/null +++ b/tests/testsuites/Dec.ts3164 @@ -0,0 +1,3 @@ +<167>Dec 6 16:57:54 172.20.245.8 TAG: MSG +Dec 6 16:57:54 +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/Feb.ts3164 b/tests/testsuites/Feb.ts3164 new file mode 100644 index 00000000..d1eaaa33 --- /dev/null +++ b/tests/testsuites/Feb.ts3164 @@ -0,0 +1,3 @@ +<167>Feb 6 16:57:54 172.20.245.8 TAG: MSG +Feb 6 16:57:54 +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/Jan.ts3164 b/tests/testsuites/Jan.ts3164 new file mode 100644 index 00000000..0cb1c8e2 --- /dev/null +++ b/tests/testsuites/Jan.ts3164 @@ -0,0 +1,3 @@ +<167>Jan 6 16:57:54 172.20.245.8 TAG: MSG +Jan 6 16:57:54 +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/Jul.ts3164 b/tests/testsuites/Jul.ts3164 new file mode 100644 index 00000000..562e1ec4 --- /dev/null +++ b/tests/testsuites/Jul.ts3164 @@ -0,0 +1,3 @@ +<167>Jul 6 16:57:54 172.20.245.8 TAG: MSG +Jul 6 16:57:54 +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/Jun.ts3164 b/tests/testsuites/Jun.ts3164 new file mode 100644 index 00000000..ede27e0e --- /dev/null +++ b/tests/testsuites/Jun.ts3164 @@ -0,0 +1,3 @@ +<167>Jun 6 16:57:54 172.20.245.8 TAG: MSG +Jun 6 16:57:54 +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/Mar.ts3164 b/tests/testsuites/Mar.ts3164 new file mode 100644 index 00000000..55dd5bc2 --- /dev/null +++ b/tests/testsuites/Mar.ts3164 @@ -0,0 +1,3 @@ +<167>Mar 6 16:57:54 172.20.245.8 TAG: MSG +Mar 6 16:57:54 +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/May.ts3164 b/tests/testsuites/May.ts3164 new file mode 100644 index 00000000..72a5a301 --- /dev/null +++ b/tests/testsuites/May.ts3164 @@ -0,0 +1,3 @@ +<167>May 6 16:57:54 172.20.245.8 TAG: MSG +May 6 16:57:54 +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/Nov.ts3164 b/tests/testsuites/Nov.ts3164 new file mode 100644 index 00000000..e8f00e01 --- /dev/null +++ b/tests/testsuites/Nov.ts3164 @@ -0,0 +1,3 @@ +<167>Nov 6 16:57:54 172.20.245.8 TAG: MSG +Nov 6 16:57:54 +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/Oct.ts3164 b/tests/testsuites/Oct.ts3164 new file mode 100644 index 00000000..01423fef --- /dev/null +++ b/tests/testsuites/Oct.ts3164 @@ -0,0 +1,3 @@ +<167>Oct 6 16:57:54 172.20.245.8 TAG: MSG +Oct 6 16:57:54 +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/Sep.ts3164 b/tests/testsuites/Sep.ts3164 new file mode 100644 index 00000000..6c9e48e0 --- /dev/null +++ b/tests/testsuites/Sep.ts3164 @@ -0,0 +1,3 @@ +<167>Sep 6 16:57:54 172.20.245.8 TAG: MSG +Sep 6 16:57:54 +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/arrayqueue.conf b/tests/testsuites/arrayqueue.conf new file mode 100644 index 00000000..c5874a83 --- /dev/null +++ b/tests/testsuites/arrayqueue.conf @@ -0,0 +1,14 @@ +# Test for queue fixedArray mode (see .sh file for details) +# rgerhards, 2009-04-17 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +$MainMsgQueueTimeoutShutdown 10000 +$InputTCPServerRun 13514 + +# set spool locations and switch queue to disk-only mode +$MainMsgQueueType FixedArray + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/badqi.conf b/tests/testsuites/badqi.conf new file mode 100644 index 00000000..0ab059df --- /dev/null +++ b/tests/testsuites/badqi.conf @@ -0,0 +1,15 @@ +# Test for bad .qi file (see .sh file for details) +# rgerhards, 2009-10-21 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +$MainMsgQueueTimeoutShutdown 10000 +$InputTCPServerRun 13514 + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +# instruct to use bad .qi file +$WorkDirectory bad_qi +$ActionQueueType LinkedList +$ActionQueueFileName dbq +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/da-mainmsg-q.conf b/tests/testsuites/da-mainmsg-q.conf new file mode 100644 index 00000000..843a3e4f --- /dev/null +++ b/tests/testsuites/da-mainmsg-q.conf @@ -0,0 +1,21 @@ +# Test for DA mode in main message queue (see .sh file for details) +# rgerhards, 2009-04-22 +$ModLoad ../plugins/imtcp/.libs/imtcp +$MainMsgQueueTimeoutShutdown 10000 +$InputTCPServerRun 13514 + +$IncludeConfig diag-common.conf + +# set spool locations and switch queue to disk assisted mode +$WorkDirectory test-spool +$MainMsgQueueSize 200 # this *should* trigger moving on to DA mode... +# note: we must set QueueSize sufficiently high, so that 70% (light delay mark) +# is high enough above HighWatermark! +$MainMsgQueueHighWatermark 80 +$MainMsgQueueLowWatermark 40 +$MainMsgQueueFilename mainq +$MainMsgQueueType linkedlist + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/diag-common.conf b/tests/testsuites/diag-common.conf new file mode 100644 index 00000000..9e9e28fe --- /dev/null +++ b/tests/testsuites/diag-common.conf @@ -0,0 +1,16 @@ +# This is a config include file. It sets up rsyslog so that the +# diag system can successfully be used. Also, it generates a file +# "rsyslogd.started" after rsyslogd is initialized. This config file +# should be included in all tests that intend to use common code for +# controlling the daemon. +# NOTE: we assume that rsyslogd's current working directory is +# ./tests (or the distcheck equivalent), in particlular that this +# config file resides in the testsuites subdirectory. +# rgerhards, 2009-05-27 +$ModLoad ../plugins/imdiag/.libs/imdiag +$IMDiagServerRun 13500 + +$template startupfile,"rsyslogd.started" # trick to use relative path names! +:syslogtag, contains, "rsyslogd" ?startupfile + +$ErrorMessagesToStderr off diff --git a/tests/testsuites/dircreate_dflt.conf b/tests/testsuites/dircreate_dflt.conf new file mode 100644 index 00000000..9b9aadb8 --- /dev/null +++ b/tests/testsuites/dircreate_dflt.conf @@ -0,0 +1,11 @@ +# see .sh file for description +# rgerhards, 2009-11-30 +$IncludeConfig diag-common.conf + +# set spool locations and switch queue to disk-only mode +$WorkDirectory test-spool +$MainMsgQueueFilename mainq +$MainMsgQueueType disk + +$template dynfile,"test-logdir/rsyslog.out.log" # trick to use relative path names! +*.* ?dynfile diff --git a/tests/testsuites/dircreate_off.conf b/tests/testsuites/dircreate_off.conf new file mode 100644 index 00000000..28ccbd8c --- /dev/null +++ b/tests/testsuites/dircreate_off.conf @@ -0,0 +1,12 @@ +# see .sh file for description +# rgerhards, 2009-11-30 +$IncludeConfig diag-common.conf + +# set spool locations and switch queue to disk-only mode +$WorkDirectory test-spool +$MainMsgQueueFilename mainq +$MainMsgQueueType disk + +$CreateDirs off +$template dynfile,"test-logdir/rsyslog.out.log" # trick to use relative path names! +*.* ?dynfile diff --git a/tests/testsuites/discard.conf b/tests/testsuites/discard.conf new file mode 100644 index 00000000..bbe2fe77 --- /dev/null +++ b/tests/testsuites/discard.conf @@ -0,0 +1,13 @@ +# Test for discard functionality +# rgerhards, 2009-07-30 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +$MainMsgQueueTimeoutShutdown 10000 +$InputTCPServerRun 13514 + +:msg, contains, "00000001" ~ + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/diskqueue-fsync.conf b/tests/testsuites/diskqueue-fsync.conf new file mode 100644 index 00000000..0a02c6ce --- /dev/null +++ b/tests/testsuites/diskqueue-fsync.conf @@ -0,0 +1,17 @@ +# Test for queue disk mode (see .sh file for details) +# rgerhards, 2009-04-17 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +$InputTCPServerRun 13514 + +# set spool locations and switch queue to disk-only mode +$WorkDirectory test-spool +$MainMsgQueueSyncQueueFiles on +$MainMsgQueueTimeoutShutdown 10000 +$MainMsgQueueFilename mainq +$MainMsgQueueType disk + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/diskqueue.conf b/tests/testsuites/diskqueue.conf index 017ee96d..a992c5a5 100644 --- a/tests/testsuites/diskqueue.conf +++ b/tests/testsuites/diskqueue.conf @@ -1,14 +1,11 @@ # Test for queue disk mode (see .sh file for details) # rgerhards, 2009-04-17 +$IncludeConfig diag-common.conf + $ModLoad ../plugins/imtcp/.libs/imtcp $MainMsgQueueTimeoutShutdown 10000 $InputTCPServerRun 13514 -$ModLoad ../plugins/imdiag/.libs/imdiag -$IMDiagServerRun 13500 - -$ErrorMessagesToStderr off - # set spool locations and switch queue to disk-only mode $WorkDirectory test-spool $MainMsgQueueFilename mainq diff --git a/tests/testsuites/empty.parse1 b/tests/testsuites/empty.parse1 new file mode 100644 index 00000000..86a86986 --- /dev/null +++ b/tests/testsuites/empty.parse1 @@ -0,0 +1,3 @@ +<14>Jan 6 2009 15:22:26 localhost +14,user,info,Jan 6 15:22:26,localhost,,, +#Note: there is one space after localhost, but then \n! diff --git a/tests/testsuites/execonlyonce.conf b/tests/testsuites/execonlyonce.conf new file mode 100644 index 00000000..085b970e --- /dev/null +++ b/tests/testsuites/execonlyonce.conf @@ -0,0 +1,12 @@ +# see the equally-named .sh file for details +# rgerhards, 2009-11-12 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +$MainMsgQueueTimeoutShutdown 10000 +$InputTCPServerRun 13514 + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +$ActionExecOnlyOnceEveryInterval 3 +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/execonlyonce.data b/tests/testsuites/execonlyonce.data new file mode 100644 index 00000000..3c54f3d4 --- /dev/null +++ b/tests/testsuites/execonlyonce.data @@ -0,0 +1,2 @@ +00000001 +00000100 diff --git a/tests/testsuites/imtcp-multiport.conf b/tests/testsuites/imtcp-multiport.conf index ec059fe4..ccdc15fb 100644 --- a/tests/testsuites/imtcp-multiport.conf +++ b/tests/testsuites/imtcp-multiport.conf @@ -1,16 +1,13 @@ # Test for queue disk mode (see .sh file for details) # rgerhards, 2009-05-22 +$IncludeConfig diag-common.conf + $ModLoad ../plugins/imtcp/.libs/imtcp $MainMsgQueueTimeoutShutdown 10000 $InputTCPServerRun 13514 $InputTCPServerRun 13515 $InputTCPServerRun 13516 -$ModLoad ../plugins/imdiag/.libs/imdiag -$IMDiagServerRun 13500 - -$ErrorMessagesToStderr off - $template outfmt,"%msg:F,58:2%\n" $template dynfile,"rsyslog.out.log" # trick to use relative path names! :msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/invalid.conf b/tests/testsuites/invalid.conf new file mode 100644 index 00000000..8a865ba5 --- /dev/null +++ b/tests/testsuites/invalid.conf @@ -0,0 +1,3 @@ +# This is an invalid config file that shall trigger an exit code +# with the config verification run +$invalid diff --git a/tests/testsuites/linkedlistqueue.conf b/tests/testsuites/linkedlistqueue.conf new file mode 100644 index 00000000..92a9649c --- /dev/null +++ b/tests/testsuites/linkedlistqueue.conf @@ -0,0 +1,16 @@ +# Test for queue LinkedList mode (see .sh file for details) +# rgerhards, 2009-04-17 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +$MainMsgQueueTimeoutShutdown 10000 +$InputTCPServerRun 13514 + +$ErrorMessagesToStderr off + +# set spool locations and switch queue to disk-only mode +$MainMsgQueueType LinkedList + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/malformed1.parse1 b/tests/testsuites/malformed1.parse1 new file mode 100644 index 00000000..a8825fe8 --- /dev/null +++ b/tests/testsuites/malformed1.parse1 @@ -0,0 +1,6 @@ +<131>Oct 8 23:05:06 10.321.1.123 05",result_code=200,b +131,local0,err,Oct 8 23:05:06,10.321.1.123,05",result_code=200,b,05",result_code=200,b, +# a somewhat mangeld-with real-life sample of a malformed message +# the key here is not what is being parsed, but that we do not abort! +# NOTE: if a parser enhancement breaks the format, this is probably OK +# also note that the above message does NOT contain a MSG part diff --git a/tests/testsuites/manytcp.conf b/tests/testsuites/manytcp.conf index 3867da46..eb9db257 100644 --- a/tests/testsuites/manytcp.conf +++ b/tests/testsuites/manytcp.conf @@ -1,16 +1,13 @@ # Test for tcp "flood" testing # rgerhards, 2009-04-08 +$IncludeConfig diag-common.conf + $ModLoad ../plugins/imtcp/.libs/imtcp $MainMsgQueueTimeoutShutdown 10000 $MaxOpenFiles 2000 $InputTCPMaxSessions 1100 $InputTCPServerRun 13514 -$ModLoad ../plugins/imdiag/.libs/imdiag -$IMDiagServerRun 13500 - -$ErrorMessagesToStderr off - $template outfmt,"%msg:F,58:2%\n" $template dynfile,"rsyslog.out.log" # trick to use relative path names! :msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/mark.parse1 b/tests/testsuites/mark.parse1 new file mode 100644 index 00000000..fff9ae6d --- /dev/null +++ b/tests/testsuites/mark.parse1 @@ -0,0 +1,7 @@ +#This is a malformed message, but one from real life. At least, +#it should be parsed as can be seen here. +<6>Feb 18 16:01:59 serverX -- MARK -- +6,kern,info,Feb 18 16:01:59,serverX,--,--, MARK -- +# and the next one as an extreme case (note the absence of PRI) +Feb 18 16:01:59 serverX -- MARK -- +13,user,notice,Feb 18 16:01:59,serverX,--,--, MARK -- diff --git a/tests/testsuites/master.nolimittag b/tests/testsuites/master.nolimittag new file mode 100644 index 00000000..502d9d5d --- /dev/null +++ b/tests/testsuites/master.nolimittag @@ -0,0 +1,11 @@ +<167>Mar 6 16:57:54 172.20.245.8 TAG: Rest of message... ++TAG:+ +# now one char, no colon +<167>Mar 6 16:57:54 172.20.245.8 0 Rest of message... ++0+ +# Now exactly with 32 characters +<167>Mar 6 16:57:54 172.20.245.8 01234567890123456789012345678901 Rest of message... ++01234567890123456789012345678901+ +# Now oversize, should be completely output with this config +<167>Mar 6 16:57:54 172.20.245.8 01234567890123456789012345678901-toolong Rest of message... ++01234567890123456789012345678901-toolong+ diff --git a/tests/testsuites/master.rfctag b/tests/testsuites/master.rfctag new file mode 100644 index 00000000..3f1e0c66 --- /dev/null +++ b/tests/testsuites/master.rfctag @@ -0,0 +1,11 @@ +<167>Mar 6 16:57:54 172.20.245.8 TAG: Rest of message... ++TAG:+ +# now one char, no colon +<167>Mar 6 16:57:54 172.20.245.8 0 Rest of message... ++0+ +# Now exactly with 32 characters +<167>Mar 6 16:57:54 172.20.245.8 01234567890123456789012345678901 Rest of message... ++01234567890123456789012345678901+ +# Now oversize, should be truncated with this config +<167>Mar 6 16:57:54 172.20.245.8 01234567890123456789012345678901-toolong Rest of message... ++01234567890123456789012345678901+ diff --git a/tests/testsuites/master.subsecond b/tests/testsuites/master.subsecond new file mode 100644 index 00000000..ee924877 --- /dev/null +++ b/tests/testsuites/master.subsecond @@ -0,0 +1,8 @@ +<34>1 2003-01-23T12:34:56.003Z mymachine.example.com su - ID47 - MSG +003 +# full precision +<34>1 2003-01-23T12:34:56.123456Z mymachine.example.com su - ID47 - MSG +123456 +# without +<34>1 2003-01-23T12:34:56Z mymachine.example.com su - ID47 - MSG +0 diff --git a/tests/testsuites/master.ts3339 b/tests/testsuites/master.ts3339 new file mode 100644 index 00000000..b4dd5f39 --- /dev/null +++ b/tests/testsuites/master.ts3339 @@ -0,0 +1,22 @@ +<34>1 2003-11-11T22:14:15.003Z mymachine.example.com su - ID47 - MSG +2003-11-11T22:14:15.003Z +# next test +<34>1 2003-01-11T22:14:15.003Z mymachine.example.com su - ID47 - MSG +2003-01-11T22:14:15.003Z +# next test +<34>1 2003-11-01T22:04:15.003Z mymachine.example.com su - ID47 - MSG +2003-11-01T22:04:15.003Z +# next test +<34>1 2003-11-11T02:14:15.003Z mymachine.example.com su - ID47 - MSG +2003-11-11T02:14:15.003Z +# next test +<34>1 2003-11-11T22:04:05.003Z mymachine.example.com su - ID47 - MSG +2003-11-11T22:04:05.003Z +# next test +<34>1 2003-11-11T22:04:05.003+02:00 mymachine.example.com su - ID47 - MSG +2003-11-11T22:04:05.003+02:00 +# next test +<34>1 2003-11-11T22:04:05.003+01:30 mymachine.example.com su - ID47 - MSG +2003-11-11T22:04:05.003+01:30 +<34>1 2003-11-11T22:04:05.123456+01:30 mymachine.example.com su - ID47 - MSG +2003-11-11T22:04:05.123456+01:30 diff --git a/tests/testsuites/master.tsmysql b/tests/testsuites/master.tsmysql new file mode 100644 index 00000000..dc6d85be --- /dev/null +++ b/tests/testsuites/master.tsmysql @@ -0,0 +1,2 @@ +<34>1 2003-01-23T12:34:56.003Z mymachine.example.com su - ID47 - MSG +20030123123456 diff --git a/tests/testsuites/master.tspgsql b/tests/testsuites/master.tspgsql new file mode 100644 index 00000000..d7ac19ff --- /dev/null +++ b/tests/testsuites/master.tspgsql @@ -0,0 +1,2 @@ +<34>1 2003-01-23T12:34:56.003Z mymachine.example.com su - ID47 - MSG +2003-01-23 12:34:56 diff --git a/tests/testsuites/mon1digit.ts3164 b/tests/testsuites/mon1digit.ts3164 new file mode 100644 index 00000000..0cb1c8e2 --- /dev/null +++ b/tests/testsuites/mon1digit.ts3164 @@ -0,0 +1,3 @@ +<167>Jan 6 16:57:54 172.20.245.8 TAG: MSG +Jan 6 16:57:54 +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/mon2digit.ts3164 b/tests/testsuites/mon2digit.ts3164 new file mode 100644 index 00000000..9606961c --- /dev/null +++ b/tests/testsuites/mon2digit.ts3164 @@ -0,0 +1,3 @@ +<167>Jan 16 16:57:54 172.20.245.8 TAG: MSG +Jan 16 16:57:54 +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/nolimittag.conf b/tests/testsuites/nolimittag.conf new file mode 100644 index 00000000..0b6ec387 --- /dev/null +++ b/tests/testsuites/nolimittag.conf @@ -0,0 +1,8 @@ +$ModLoad ../plugins/omstdout/.libs/omstdout +$IncludeConfig nettest.input.conf # This picks the to be tested input from the test driver! + +$ErrorMessagesToStderr off + +# use a special format +$template fmt,"+%syslogtag%+\n" +*.* :omstdout:;fmt diff --git a/tests/testsuites/omruleset-queue.conf b/tests/testsuites/omruleset-queue.conf new file mode 100644 index 00000000..edc33c40 --- /dev/null +++ b/tests/testsuites/omruleset-queue.conf @@ -0,0 +1,20 @@ +# test for omruleset (see .sh file for details) +# rgerhards, 2009-11-02 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/omruleset/.libs/omruleset +$ModLoad ../plugins/imtcp/.libs/imtcp +$InputTCPServerRun 13514 + +$ruleset rsinclude +# create ruleset main queue with default parameters +$RulesetCreateMainQueue on +# make sure we do not terminate too early! +$MainMsgQueueTimeoutShutdown 10000 +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt + +$ruleset RSYSLOG_DefaultRuleset +$ActionOmrulesetRulesetName rsinclude +*.* :omruleset: diff --git a/tests/testsuites/omruleset.conf b/tests/testsuites/omruleset.conf new file mode 100644 index 00000000..fa6b906e --- /dev/null +++ b/tests/testsuites/omruleset.conf @@ -0,0 +1,16 @@ +# Basic test for omruleset (see .sh file for details) +# rgerhards, 2009-11-02 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/omruleset/.libs/omruleset +$ModLoad ../plugins/imtcp/.libs/imtcp +$InputTCPServerRun 13514 + +$ruleset rsinclude +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt + +$ruleset RSYSLOG_DefaultRuleset +$ActionOmrulesetRulesetName rsinclude +*.* :omruleset: diff --git a/tests/testsuites/oversizeTag-1.parse1 b/tests/testsuites/oversizeTag-1.parse1 new file mode 100644 index 00000000..d45ba1f2 --- /dev/null +++ b/tests/testsuites/oversizeTag-1.parse1 @@ -0,0 +1,2 @@ +<38>Mar 27 19:06:53 source_server 0123456789012345678901234567890123456789: MSG part +38,auth,info,Mar 27 19:06:53,source_server,0123456789012345678901234567890123456789,0123456789012345678901234567890123456789:, MSG part diff --git a/tests/testsuites/parse1udp.conf b/tests/testsuites/parse1udp.conf new file mode 100644 index 00000000..0fb7d16d --- /dev/null +++ b/tests/testsuites/parse1udp.conf @@ -0,0 +1,9 @@ +$ModLoad ../plugins/omstdout/.libs/omstdout +$ModLoad ../plugins/imudp/.libs/imudp +$UDPServerRun 12514 + +$ErrorMessagesToStderr off + +# use a special format that we can easily parse in expect +$template expect,"%PRI%,%syslogfacility-text%,%syslogseverity-text%,%timestamp%,%hostname%,%programname%,%syslogtag%,%msg%\n" +*.* :omstdout:;expect diff --git a/tests/testsuites/parse2.conf b/tests/testsuites/parse2.conf new file mode 100644 index 00000000..04d910bc --- /dev/null +++ b/tests/testsuites/parse2.conf @@ -0,0 +1,8 @@ +$ModLoad ../plugins/omstdout/.libs/omstdout +$IncludeConfig nettest.input.conf # This picks the to be tested input from the test driver! + +$ErrorMessagesToStderr off + +# use a special format that we can easily parse in expect +$template output,"%PRI%,%syslogfacility-text%,%syslogseverity-text%,%timestamp%,%programname%,%syslogtag%,%msg%\n" +*.* :omstdout:;output diff --git a/tests/testsuites/parse3.conf b/tests/testsuites/parse3.conf new file mode 100644 index 00000000..d5cf77d9 --- /dev/null +++ b/tests/testsuites/parse3.conf @@ -0,0 +1,8 @@ +$ModLoad ../plugins/omstdout/.libs/omstdout +$IncludeConfig nettest.input.conf # This picks the to be tested input from the test driver! + +$ErrorMessagesToStderr off + +# use a special format that we can easily parse in expect +$Template output,"%timereported:1:$:date-rfc3339,csv%, %hostname:::csv%, %programname:::csv%, %syslogtag:R,ERE,0,BLANK:[0-9]+--end:csv%, %syslogseverity:::csv%, %msg:::drop-last-lf,csv%\n" +*.* :omstdout:;output diff --git a/tests/testsuites/parse_8bit_escape.conf b/tests/testsuites/parse_8bit_escape.conf new file mode 100644 index 00000000..0598f33f --- /dev/null +++ b/tests/testsuites/parse_8bit_escape.conf @@ -0,0 +1,9 @@ +$ModLoad ../plugins/omstdout/.libs/omstdout +$IncludeConfig nettest.input.conf # This picks the to be tested input from the test driver! + +$ErrorMessagesToStderr off +$Escape8BitCharactersOnReceive on + +# use a special format that we can easily parse in expect +$template expect,"%PRI%,%syslogfacility-text%,%syslogseverity-text%,%timestamp%,%hostname%,%programname%,%syslogtag%,%msg%\n" +*.* :omstdout:;expect diff --git a/tests/testsuites/parse_invld_regex.conf b/tests/testsuites/parse_invld_regex.conf new file mode 100644 index 00000000..736aae59 --- /dev/null +++ b/tests/testsuites/parse_invld_regex.conf @@ -0,0 +1,8 @@ +$ModLoad ../plugins/omstdout/.libs/omstdout +$IncludeConfig nettest.input.conf # This picks the to be tested input from the test driver! + +$ErrorMessagesToStderr off + +# use a special format that we can easily parse in expect +$Template output,"%timereported:1:$:date-rfc3339,csv%, %hostname:::csv%, %programname:::csv%, %syslogtag:R,ERE,0,BLANK:[0-9+--end:csv%, %syslogseverity:::csv%, %msg:::drop-last-lf,csv%\n" +*.* :omstdout:;output diff --git a/tests/testsuites/pipeaction.conf b/tests/testsuites/pipeaction.conf new file mode 100644 index 00000000..f58b6d65 --- /dev/null +++ b/tests/testsuites/pipeaction.conf @@ -0,0 +1,16 @@ +# Test for pipe output action (see .sh file for details) +# rgerhards, 2009-11-05 +$IncludeConfig diag-common.conf + +$MainMsgQueueTimeoutShutdown 10000 + +# set spool locations and switch queue to disk-only mode +$WorkDirectory test-spool +$MainMsgQueueFilename mainq +$MainMsgQueueType disk + +$template outfmt,"%msg:F,58:2%\n" +# with pipes, we do not need to use absolute path names, so +# we can simply refer to our working pipe via the usual relative +# path name +:msg, contains, "msgnum:" |rsyslog-testbench-fifo;outfmt diff --git a/tests/testsuites/queue-persist.conf b/tests/testsuites/queue-persist.conf new file mode 100644 index 00000000..8903042d --- /dev/null +++ b/tests/testsuites/queue-persist.conf @@ -0,0 +1,21 @@ +# Test for persisting messages on shutdown +# rgerhards, 2009-04-17 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +$MainMsgQueueTimeoutShutdown 1 +$MainMsgQueueSaveOnShutdown on +$InputTCPServerRun 13514 + +$ModLoad ../plugins/omtesting/.libs/omtesting + +# set spool locations and switch queue to disk-only mode +$WorkDirectory test-spool +$MainMsgQueueFilename mainq +$IncludeConfig work-queuemode.conf + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt + +$IncludeConfig work-delay.conf diff --git a/tests/testsuites/reallife.parse1 b/tests/testsuites/reallife.parse1 new file mode 100644 index 00000000..a83d2dca --- /dev/null +++ b/tests/testsuites/reallife.parse1 @@ -0,0 +1,12 @@ +# New tests should be added to this file if there is no specific +# reason for not doing that. Initially, we could only handle one test +# case per file, but this restriction has been removed some time ago. +# So it is less troublesome (and easier to overlook) to have all related +# tests in a single file. +# This file contains a lot of real-life samples (of course mangled so +# that they can not be traced back to the original submitter). Note +# that IP addr 192.0.2.1 is specifically set aside for testing and +# documentation by IANA. +# rgerhards, 2009-10-19 +<29>Oct 16 20:47:24 example-p exam-pl[12345]: connect host= /192.0.2.1 +29,daemon,notice,Oct 16 20:47:24,example-p,exam-pl,exam-pl[12345]:, connect host= /192.0.2.1 diff --git a/tests/testsuites/reallife.parse2 b/tests/testsuites/reallife.parse2 new file mode 100644 index 00000000..c42f2526 --- /dev/null +++ b/tests/testsuites/reallife.parse2 @@ -0,0 +1,12 @@ +# New tests should be added to this file if there is no specific +# reason for not doing that. Initially, we could only handle one test +# case per file, but this restriction has been removed some time ago. +# So it is less troublesome (and easier to overlook) to have all related +# tests in a single file. +# This file contains a lot of real-life samples (of course mangled so +# that they can not be traced back to the original submitter). Note +# that IP addr 192.0.2.1 is specifically set aside for testing and +# documentation by IANA. +# rgerhards, 2009-10-19 +<175>Oct 16 23:47:31 #001 MSWinEventLog 0#011Security#01119023582#011Fri Oct 16 16:30:44 2009#011592#011Security#011rgabcde#011User#011Success Audit#011XSXSXSN01#011Detailed Tracking#011#0112572#01119013885 +175,local5,debug,Oct 16 23:47:31,#001,#001, MSWinEventLog 0#011Security#01119023582#011Fri Oct 16 16:30:44 2009#011592#011Security#011rgabcde#011User#011Success Audit#011XSXSXSN01#011Detailed Tracking#011#0112572#01119013885 diff --git a/tests/testsuites/reallife.parse3 b/tests/testsuites/reallife.parse3 new file mode 100644 index 00000000..465635bd --- /dev/null +++ b/tests/testsuites/reallife.parse3 @@ -0,0 +1,15 @@ +# New tests should be added to this file if there is no specific +# reason for not doing that. Initially, we could only handle one test +# case per file, but this restriction has been removed some time ago. +# So it is less troublesome (and easier to overlook) to have all related +# tests in a single file. +# This file contains a lot of real-life samples (of course mangled so +# that they can not be traced back to the original submitter). Note +# that IP addr 192.0.2.1 is specifically set aside for testing and +# documentation by IANA. +# rgerhards, 2009-10-19 +<175>Oct 16 2009 23:47:31 hostname tag This is a message +"2009-10-16T23:47:31+01:00", "hostname", "tag", "", "7", " This is a message" +# +<175>Oct 16 2009 23:47:31 hostname tag[1234] This is a message +"2009-10-16T23:47:31+01:00", "hostname", "tag", "1234", "7", " This is a message" diff --git a/tests/testsuites/rfctag.conf b/tests/testsuites/rfctag.conf new file mode 100644 index 00000000..8619e89e --- /dev/null +++ b/tests/testsuites/rfctag.conf @@ -0,0 +1,9 @@ +$ModLoad ../plugins/omstdout/.libs/omstdout +$IncludeConfig nettest.input.conf # This picks the to be tested input from the test driver! + +$ErrorMessagesToStderr off + +# use a special format +# Note: the plus signs are necessary to detect truncated logs! +$template fmt,"+%syslogtag:1:32%+\n" +*.* :omstdout:;fmt diff --git a/tests/testsuites/rsf_getenv.conf b/tests/testsuites/rsf_getenv.conf new file mode 100644 index 00000000..2f2eb58c --- /dev/null +++ b/tests/testsuites/rsf_getenv.conf @@ -0,0 +1,17 @@ +# Test for RainerScript getenv() function (see .sh file for details) +# Note envvar MSGNUM must be set to "msgnum:" +# rgerhards, 2009-11-03 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +$MainMsgQueueTimeoutShutdown 10000 +$InputTCPServerRun 13514 + +# set spool locations and switch queue to disk-only mode +$WorkDirectory test-spool +$MainMsgQueueFilename mainq +$MainMsgQueueType disk + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +if $msg contains getenv('MSGNUM') then ?dynfile;outfmt diff --git a/tests/testsuites/rulesetmultiqueue.conf b/tests/testsuites/rulesetmultiqueue.conf new file mode 100644 index 00000000..c8a82dd6 --- /dev/null +++ b/tests/testsuites/rulesetmultiqueue.conf @@ -0,0 +1,34 @@ +# Test for multiple ruleset queues (see .sh file for details) +# rgerhards, 2009-10-30 +$IncludeConfig diag-common.conf +$ModLoad ../plugins/imtcp/.libs/imtcp +$MainMsgQueueTimeoutShutdown 10000 + +# general definition +$template outfmt,"%msg:F,58:2%\n" + +# create the individual rulesets +$ruleset file1 +$RulesetCreateMainQueue on +$template dynfile1,"rsyslog.out1.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile1;outfmt + +$ruleset file2 +$RulesetCreateMainQueue on +$template dynfile2,"rsyslog.out2.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile2;outfmt + +$ruleset file3 +$RulesetCreateMainQueue on +$template dynfile3,"rsyslog.out3.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile3;outfmt + +# start listeners and bind them to rulesets +$InputTCPServerBindRuleset file1 +$InputTCPServerRun 13514 + +$InputTCPServerBindRuleset file2 +$InputTCPServerRun 13515 + +$InputTCPServerBindRuleset file3 +$InputTCPServerRun 13516 diff --git a/tests/testsuites/samples.parse_invld_regex b/tests/testsuites/samples.parse_invld_regex new file mode 100644 index 00000000..9ac2c3aa --- /dev/null +++ b/tests/testsuites/samples.parse_invld_regex @@ -0,0 +1,16 @@ +# New tests should be added to this file if there is no specific +# reason for not doing that. Initially, we could only handle one test +# case per file, but this restriction has been removed some time ago. +# So it is less troublesome (and easier to overlook) to have all related +# tests in a single file. +# the actual message is not important. There is an error inside the conf +# file, and all messages will trigger the same problem. +# NOTE: it is correct that the "BAD REGULAR EXPRESSION" error message is +# *NOT* run through the rest of the propety replace, in specific through +# the CSV escaper. We do not do this because it could potentially lead +# to an obfuscated error message, and thus making problems hard to find. As +# this is a real error case, there is no problem in not obeying to the +# configured format. +# rgerhards, 2010-02-08 +<175>Feb 08 2008 23:47:31 hostname tag This is a message +"2008-02-08T23:47:31+01:00", "hostname", "tag", **NO MATCH** **BAD REGULAR EXPRESSION**, "7", " This is a message" diff --git a/tests/testsuites/sndrcv_gzip_rcvr.conf b/tests/testsuites/sndrcv_gzip_rcvr.conf new file mode 100644 index 00000000..6f7ce34b --- /dev/null +++ b/tests/testsuites/sndrcv_gzip_rcvr.conf @@ -0,0 +1,11 @@ +# see equally-named shell file for details +# rgerhards, 2009-11-11 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +# then SENDER sends to this port (not tcpflood!) +$InputTCPServerRun 13515 + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/sndrcv_gzip_sender.conf b/tests/testsuites/sndrcv_gzip_sender.conf new file mode 100644 index 00000000..c874c068 --- /dev/null +++ b/tests/testsuites/sndrcv_gzip_sender.conf @@ -0,0 +1,8 @@ +# see tcpsndrcv.sh for details +# rgerhards, 2009-11-11 +$IncludeConfig diag-common2.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +$InputTCPServerRun 13514 + +*.* @@127.0.0.1:13515 diff --git a/tests/testsuites/sndrcv_omudpspoof_nonstdpt_rcvr.conf b/tests/testsuites/sndrcv_omudpspoof_nonstdpt_rcvr.conf new file mode 100644 index 00000000..65659f00 --- /dev/null +++ b/tests/testsuites/sndrcv_omudpspoof_nonstdpt_rcvr.conf @@ -0,0 +1,11 @@ +# see equally-named shell file for details +# rgerhards, 2009-11-12 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imudp/.libs/imudp +# then SENDER sends to this port (not tcpflood!) +$UDPServerRun 2514 + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/sndrcv_omudpspoof_nonstdpt_sender.conf b/tests/testsuites/sndrcv_omudpspoof_nonstdpt_sender.conf new file mode 100644 index 00000000..29a30145 --- /dev/null +++ b/tests/testsuites/sndrcv_omudpspoof_nonstdpt_sender.conf @@ -0,0 +1,18 @@ +# see equally-named shell file for details +# rgerhards, 2009-11-11 +$IncludeConfig diag-common2.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +# this listener is for message generation by the test framework! +$InputTCPServerRun 13514 + +$ModLoad ../plugins/omudpspoof/.libs/omudpspoof +$template spoofaddr,"127.0.0.1" + +#begin action definition +$ActionOMUDPSpoofSourceNameTemplate spoofaddr +$ActionOMUDPSpoofTargetHost 127.0.0.1 +$ActionOMUDPSpoofTargetPort 2514 +$ActionOMUDPSpoofSourcePortStart 514 +$ActionOMUDPSpoofSourcePortEnd 514 +*.* :omudpspoof: diff --git a/tests/testsuites/sndrcv_omudpspoof_rcvr.conf b/tests/testsuites/sndrcv_omudpspoof_rcvr.conf new file mode 100644 index 00000000..e5401811 --- /dev/null +++ b/tests/testsuites/sndrcv_omudpspoof_rcvr.conf @@ -0,0 +1,11 @@ +# see equally-named shell file for details +# rgerhards, 2009-11-12 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imudp/.libs/imudp +# then SENDER sends to this port (not tcpflood!) +$UDPServerRun 514 + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/sndrcv_omudpspoof_sender.conf b/tests/testsuites/sndrcv_omudpspoof_sender.conf new file mode 100644 index 00000000..c0d25935 --- /dev/null +++ b/tests/testsuites/sndrcv_omudpspoof_sender.conf @@ -0,0 +1,17 @@ +# see equally-named shell file for details +# rgerhards, 2009-11-11 +$IncludeConfig diag-common2.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +# this listener is for message generation by the test framework! +$InputTCPServerRun 13514 + +$ModLoad ../plugins/omudpspoof/.libs/omudpspoof +$template spoofaddr,"127.0.0.1" + +#begin action definition +$ActionOMUDPSpoofSourceNameTemplate spoofaddr +$ActionOMUDPSpoofTargetHost 127.0.0.1 +$ActionOMUDPSpoofSourcePortStart 514 +$ActionOMUDPSpoofSourcePortEnd 514 +*.* :omudpspoof: diff --git a/tests/testsuites/sndrcv_rcvr.conf b/tests/testsuites/sndrcv_rcvr.conf new file mode 100644 index 00000000..6f7ce34b --- /dev/null +++ b/tests/testsuites/sndrcv_rcvr.conf @@ -0,0 +1,11 @@ +# see equally-named shell file for details +# rgerhards, 2009-11-11 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +# then SENDER sends to this port (not tcpflood!) +$InputTCPServerRun 13515 + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/sndrcv_sender.conf b/tests/testsuites/sndrcv_sender.conf new file mode 100644 index 00000000..f3d6ba53 --- /dev/null +++ b/tests/testsuites/sndrcv_sender.conf @@ -0,0 +1,9 @@ +# see tcpsndrcv.sh for details +# rgerhards, 2009-11-11 +$IncludeConfig diag-common2.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +# this listener is for message generation by the test framework! +$InputTCPServerRun 13514 + +*.* @@127.0.0.1:13515 diff --git a/tests/testsuites/sndrcv_tls_anon_rcvr.conf b/tests/testsuites/sndrcv_tls_anon_rcvr.conf new file mode 100644 index 00000000..01143b22 --- /dev/null +++ b/tests/testsuites/sndrcv_tls_anon_rcvr.conf @@ -0,0 +1,22 @@ +# see equally-named shell file for details +# this is the config fil for the TLS server +# rgerhards, 2009-11-11 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp + +# certificates +$DefaultNetstreamDriverCAFile testsuites/x.509/ca.pem +$DefaultNetstreamDriverCertFile testsuites/x.509/client-cert.pem +$DefaultNetstreamDriverKeyFile testsuites/x.509/client-key.pem + +$DefaultNetstreamDriver gtls # use gtls netstream driver + +# then SENDER sends to this port (not tcpflood!) +$InputTCPServerStreamDriverMode 1 +$InputTCPServerStreamDriverAuthMode anon +$InputTCPServerRun 13515 + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/sndrcv_tls_anon_sender.conf b/tests/testsuites/sndrcv_tls_anon_sender.conf new file mode 100644 index 00000000..4a944455 --- /dev/null +++ b/tests/testsuites/sndrcv_tls_anon_sender.conf @@ -0,0 +1,19 @@ +# see tcpsndrcv.sh for details +# this is the TLS client +# rgerhards, 2009-11-11 +$IncludeConfig diag-common2.conf + +# certificates +$DefaultNetstreamDriverCAFile testsuites/x.509/ca.pem +$DefaultNetstreamDriverCertFile testsuites/x.509/client-cert.pem +$DefaultNetstreamDriverKeyFile testsuites/x.509/client-key.pem + +# Note: no TLS for the listener, this is for tcpflood! +$ModLoad ../plugins/imtcp/.libs/imtcp +$InputTCPServerRun 13514 + +# set up the action +$DefaultNetstreamDriver gtls # use gtls netstream driver +$ActionSendStreamDriverMode 1 # require TLS for the connection +$ActionSendStreamDriverAuthMode anon +*.* @@127.0.0.1:13515 diff --git a/tests/testsuites/sndrcv_udp_nonstdpt_rcvr.conf b/tests/testsuites/sndrcv_udp_nonstdpt_rcvr.conf new file mode 100644 index 00000000..65659f00 --- /dev/null +++ b/tests/testsuites/sndrcv_udp_nonstdpt_rcvr.conf @@ -0,0 +1,11 @@ +# see equally-named shell file for details +# rgerhards, 2009-11-12 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imudp/.libs/imudp +# then SENDER sends to this port (not tcpflood!) +$UDPServerRun 2514 + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/sndrcv_udp_nonstdpt_sender.conf b/tests/testsuites/sndrcv_udp_nonstdpt_sender.conf new file mode 100644 index 00000000..2975f938 --- /dev/null +++ b/tests/testsuites/sndrcv_udp_nonstdpt_sender.conf @@ -0,0 +1,9 @@ +# see equally-named shell file for details +# rgerhards, 2009-11-11 +$IncludeConfig diag-common2.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +# this listener is for message generation by the test framework! +$InputTCPServerRun 13514 + +*.* @127.0.0.1:2514 diff --git a/tests/testsuites/sndrcv_udp_rcvr.conf b/tests/testsuites/sndrcv_udp_rcvr.conf new file mode 100644 index 00000000..e5401811 --- /dev/null +++ b/tests/testsuites/sndrcv_udp_rcvr.conf @@ -0,0 +1,11 @@ +# see equally-named shell file for details +# rgerhards, 2009-11-12 +$IncludeConfig diag-common.conf + +$ModLoad ../plugins/imudp/.libs/imudp +# then SENDER sends to this port (not tcpflood!) +$UDPServerRun 514 + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/sndrcv_udp_sender.conf b/tests/testsuites/sndrcv_udp_sender.conf new file mode 100644 index 00000000..28e913ef --- /dev/null +++ b/tests/testsuites/sndrcv_udp_sender.conf @@ -0,0 +1,9 @@ +# see equally-named shell file for details +# rgerhards, 2009-11-11 +$IncludeConfig diag-common2.conf + +$ModLoad ../plugins/imtcp/.libs/imtcp +# this listener is for message generation by the test framework! +$InputTCPServerRun 13514 + +*.* @127.0.0.1 diff --git a/tests/testsuites/subsecond.conf b/tests/testsuites/subsecond.conf new file mode 100644 index 00000000..58c26cc7 --- /dev/null +++ b/tests/testsuites/subsecond.conf @@ -0,0 +1,8 @@ +$ModLoad ../plugins/omstdout/.libs/omstdout +$IncludeConfig nettest.input.conf # This picks the to be tested input from the test driver! + +$ErrorMessagesToStderr off + +# use a special format +$template fmt,"%timestamp:::date-subseconds%\n" +*.* :omstdout:;fmt diff --git a/tests/testsuites/tabescape_dflt.conf b/tests/testsuites/tabescape_dflt.conf new file mode 100644 index 00000000..b9d92a37 --- /dev/null +++ b/tests/testsuites/tabescape_dflt.conf @@ -0,0 +1,8 @@ +$ModLoad ../plugins/omstdout/.libs/omstdout +$IncludeConfig nettest.input.conf # This picks the to be tested input from the test driver! + +$ErrorMessagesToStderr off + +# use a special format that we can easily parse in expect +$template fmt,"%msg%\n" +*.* :omstdout:;fmt diff --git a/tests/testsuites/tabescape_off.conf b/tests/testsuites/tabescape_off.conf new file mode 100644 index 00000000..c1eca305 --- /dev/null +++ b/tests/testsuites/tabescape_off.conf @@ -0,0 +1,10 @@ +$ModLoad ../plugins/omstdout/.libs/omstdout +$IncludeConfig nettest.input.conf # This picks the to be tested input from the test driver! + +$ErrorMessagesToStderr off + +$EscapeControlCharacterTab off + +# use a special format that we can easily parse in expect +$template fmt,"%msg%\n" +*.* :omstdout:;fmt diff --git a/tests/testsuites/threadingmq.conf b/tests/testsuites/threadingmq.conf new file mode 100644 index 00000000..b98f9b5a --- /dev/null +++ b/tests/testsuites/threadingmq.conf @@ -0,0 +1,16 @@ +# Threading test, we run a tcp flood to via an +# engine instructed to use multiple threads +# rgerhards, 2009-06-26 +$IncludeConfig diag-common.conf + +$MainMsgQueueTimeoutShutdown 100000 + +$MainMsgQueueWorkerThreadMinimumMessages 10 +$MainMsgQueueWorkerThreads 5 + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +# write quickly to the output file: +$OMFileFlushOnTXEnd off +$OMFileIOBufferSize 256k +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/threadingmqaq.conf b/tests/testsuites/threadingmqaq.conf new file mode 100644 index 00000000..f0d39057 --- /dev/null +++ b/tests/testsuites/threadingmqaq.conf @@ -0,0 +1,20 @@ +# Threading test, we run a tcp flood to via an +# engine instructed to use multiple threads +# rgerhards, 2009-06-26 +$IncludeConfig diag-common.conf + +$MainMsgQueueTimeoutShutdown 10000 + +$MainMsgQueueWorkerThreadMinimumMessages 10 +$MainMsgQueueWorkerThreads 5 + +$template outfmt,"%msg:F,58:2%\n" +$template dynfile,"rsyslog.out.log" # trick to use relative path names! +# write quickly to the output file: +$OMFileFlushOnTXEnd off +$OMFileIOBufferSize 256k +# This time, also run the action queue detached +$ActionQueueWorkerThreadMinimumMessages 10 +$ActionQueueWorkerThreads 5 +$ActionQueueType LinkedList +:msg, contains, "msgnum:" ?dynfile;outfmt diff --git a/tests/testsuites/ts3164.conf b/tests/testsuites/ts3164.conf new file mode 100644 index 00000000..7aa6a8ef --- /dev/null +++ b/tests/testsuites/ts3164.conf @@ -0,0 +1,8 @@ +$ModLoad ../plugins/omstdout/.libs/omstdout +$IncludeConfig nettest.input.conf # This picks the to be tested input from the test driver! + +$ErrorMessagesToStderr off + +# use a special format +$template fmt,"%timestamp:::date-rfc3164%\n" +*.* :omstdout:;fmt diff --git a/tests/testsuites/ts3339.conf b/tests/testsuites/ts3339.conf new file mode 100644 index 00000000..df8f23ac --- /dev/null +++ b/tests/testsuites/ts3339.conf @@ -0,0 +1,8 @@ +$ModLoad ../plugins/omstdout/.libs/omstdout +$IncludeConfig nettest.input.conf # This picks the to be tested input from the test driver! + +$ErrorMessagesToStderr off + +# use a special format +$template fmt,"%timestamp:::date-rfc3339%\n" +*.* :omstdout:;fmt diff --git a/tests/testsuites/tsmysql.conf b/tests/testsuites/tsmysql.conf new file mode 100644 index 00000000..f97d4b0a --- /dev/null +++ b/tests/testsuites/tsmysql.conf @@ -0,0 +1,8 @@ +$ModLoad ../plugins/omstdout/.libs/omstdout +$IncludeConfig nettest.input.conf # This picks the to be tested input from the test driver! + +$ErrorMessagesToStderr off + +# use a special format +$template fmt,"%timestamp:::date-mysql%\n" +*.* :omstdout:;fmt diff --git a/tests/testsuites/tspgsql.conf b/tests/testsuites/tspgsql.conf new file mode 100644 index 00000000..eb18c091 --- /dev/null +++ b/tests/testsuites/tspgsql.conf @@ -0,0 +1,8 @@ +$ModLoad ../plugins/omstdout/.libs/omstdout +$IncludeConfig nettest.input.conf # This picks the to be tested input from the test driver! + +$ErrorMessagesToStderr off + +# use a special format +$template fmt,"%timestamp:::date-pgsql%\n" +*.* :omstdout:;fmt diff --git a/tests/testsuites/upcase-date.parse1 b/tests/testsuites/upcase-date.parse1 new file mode 100644 index 00000000..2d21222a --- /dev/null +++ b/tests/testsuites/upcase-date.parse1 @@ -0,0 +1,4 @@ +<6>AUG 10 22:18:24 2009 netips-warden2-p [audit] user=[*SMS] src=192.168.11.11 iface=5 access=9 Update State Reset +6,kern,info,Aug 10 22:18:24,2009,,, netips-warden2-p [audit] user=[*SMS] src=192.168.11.11 iface=5 access=9 Update State Reset +#Example from RFC3164, section 5.4 +#Only the first two lines are important, you may place anything behind them! diff --git a/tests/testsuites/valid.conf b/tests/testsuites/valid.conf new file mode 100644 index 00000000..250f0546 --- /dev/null +++ b/tests/testsuites/valid.conf @@ -0,0 +1,3 @@ +# This is an invalid config file that shall trigger an exit code +# with the config verification run +*.* /tmp/data.log diff --git a/tests/testsuites/weird.parse1 b/tests/testsuites/weird.parse1 new file mode 100644 index 00000000..e8b90c74 --- /dev/null +++ b/tests/testsuites/weird.parse1 @@ -0,0 +1,37 @@ +# some really weird samples, some of them seen in practice, +# some other deliberately generated. The main point is that they +# should not cause an abort... +<14>Aug 30 23:00:05 X4711 AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA +14,user,info,Aug 30 23:00:05,X4711,AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA,AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA, +# important: the following line has a SP at the end of the line! +<14>Aug 30 23:00:05 X4711 +14,user,info,Aug 30 23:00:05,X4711,,, +# and this one NOT +<14>Aug 30 23:00:05 X4711 +14,user,info,Aug 30 23:00:05,X4711,,, +# there is a SP at the end of the line +<14>Aug 30 23:00:05 +14,user,info,Aug 30 23:00:05,localhost,,, +# and here is no SP at the end of the line +<14>Aug 30 23:00:05 +14,user,info,Aug 30 23:00:05,localhost,,, +# unfortunately, I can not test missing dates with this test suite, because +# we would have the current date in the response, which we can not check against +# +# and now the same tests with RFC3339 data - this can make a difference +# as a different date parser is involved. +# +<14>2010-08-30T23:00:05Z X4711 AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA +14,user,info,Aug 30 23:00:05,X4711,AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA,AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA, +# important: the following line has a SP at the end of the line! +<14>2010-08-30T23:00:05Z X4711 +14,user,info,Aug 30 23:00:05,X4711,,, +# and this one NOT +<14>2010-08-30T23:00:05Z X4711 +14,user,info,Aug 30 23:00:05,X4711,,, +# there is a SP at the end of the line +<14>2010-08-30T23:00:05Z +14,user,info,Aug 30 23:00:05,localhost,,, +# and here is no SP at the end of the line +<14>2010-08-30T23:00:05Z +14,user,info,Aug 30 23:00:05,localhost,,, diff --git a/tests/testsuites/x.509/ca-key.pem b/tests/testsuites/x.509/ca-key.pem new file mode 100644 index 00000000..1e1a0b26 --- /dev/null +++ b/tests/testsuites/x.509/ca-key.pem @@ -0,0 +1,15 @@ +-----BEGIN RSA PRIVATE KEY----- +MIICXQIBAAKBgQDZnIJGJH80j2DPBXdxgmFmBRMoBnpwQb8yhRJcJacaWigRAhp4 +wdo07rR+EpuBJHD/5ImIygUwCj/XWAs4JKm3LqK2ih1gUy/s6Tg2O5t3k11kdjEH +MKUxDOLs441dEwERPQtePEoy2POzViIyy959ZJorkdnwC4LBKdQVLEELlwIDAQAB +AoGAEQWvoRoAw1VF3tvQHJZ01Pyno3ViRX63HJYROhkN6b9MrAvsky6iyYo0nzoI +ZQE7P6EaaxNWdYwPs2IlOoaPqeos1sGVDaK/JFuja/DduoXBdCy9RFWRaugDX/1U +iMtjtu29euvegP0r2RIxaIl9dapF5alNH5MLMyBl7XTB+/kCQQDiwHnW8jS1paSc +/risF6Ie5rKuUfVDG8hqMEiKyczSHwUVYushwCclshjM6E1TBFZqMz/8PbFW51pK +OzFS2s6/AkEA9a4044RL3AWe37LIU4hbz2Y+auRvPh8x4i2cWLzdok8Rc1EHDGLN +eHBoOQ3Q2nQS94cOx6HxpRztzBgiwpTRKQJADX9BgV7nbkyO0N2EppG9j7NRvXiZ +bcYwlsmK99/tNjCsf8pkjpy+d8rzGPdW6vMeJbIpQ910OeUJhdOiKvllRwJBAIw3 +rP/dVd5xZseNpj/mp1+rnxwq3EK8UyAfoAgVYvlr3y3NpRQwn8yJezJ07CqB7QFR +F+JgTyZJaH7/l3cusGECQQCM3HmkADAKxX6RwKe8X0Kj/36rjXEMNoq0ZdXOB7Qz +f5N6og4Da9y/ZO+XMo6P3XR/TYIYrMD8nuoR33X69kb1 +-----END RSA PRIVATE KEY----- diff --git a/tests/testsuites/x.509/ca.pem b/tests/testsuites/x.509/ca.pem new file mode 100644 index 00000000..a733eb86 --- /dev/null +++ b/tests/testsuites/x.509/ca.pem @@ -0,0 +1,17 @@ +-----BEGIN CERTIFICATE----- +MIICyzCCAjagAwIBAgIESFo2XjALBgkqhkiG9w0BAQUwezELMAkGA1UEBhMCVVMx +EDAOBgNVBAoTB1NvbWVPcmcxDzANBgNVBAsTBlNvbWVPVTESMBAGA1UEBxMJU29t +ZXdoZXJlMQswCQYDVQQIEwJDQTEoMCYGA1UEAxMfc29tZU5hbWUgKG5vdCBuZWNl +c3NhcmlseSBETlMhKTAeFw0wODA2MTkxMDM1MTJaFw0xODA2MTcxMDM1MjVaMHsx +CzAJBgNVBAYTAlVTMRAwDgYDVQQKEwdTb21lT3JnMQ8wDQYDVQQLEwZTb21lT1Ux +EjAQBgNVBAcTCVNvbWV3aGVyZTELMAkGA1UECBMCQ0ExKDAmBgNVBAMTH3NvbWVO +YW1lIChub3QgbmVjZXNzYXJpbHkgRE5TISkwgZwwCwYJKoZIhvcNAQEBA4GMADCB +iAKBgNmcgkYkfzSPYM8Fd3GCYWYFEygGenBBvzKFElwlpxpaKBECGnjB2jTutH4S +m4EkcP/kiYjKBTAKP9dYCzgkqbcuoraKHWBTL+zpODY7m3eTXWR2MQcwpTEM4uzj +jV0TARE9C148SjLY87NWIjLL3n1kmiuR2fALgsEp1BUsQQuXAgMBAAGjYzBhMA8G +A1UdEwEB/wQFMAMBAf8wHgYDVR0RBBcwFYETc29tZW9uZUBleGFtcGxlLm5ldDAP +BgNVHQ8BAf8EBQMDBwQAMB0GA1UdDgQWBBT7/paNEKc65bcNe0NIhsj4cpl7iTAL +BgkqhkiG9w0BAQUDgYEAlv9ge8Koways837OLoZIam0s7wQCcwd9rWE05caps7BU +T4bfgab9U/e9mmrf3V/zXmtU6y8hhTXF5AcZv3/EmCVwsPRotgrJ+rHXTv5e2PO7 +/8C3K2Lhc89gF4qf4xZwlZU70RasKgCzZa5ivS2Y8pW6LUu6eqqgVw3pPJbW3TE= +-----END CERTIFICATE----- diff --git a/tests/testsuites/x.509/client-cert.pem b/tests/testsuites/x.509/client-cert.pem new file mode 100644 index 00000000..5bf39f81 --- /dev/null +++ b/tests/testsuites/x.509/client-cert.pem @@ -0,0 +1,16 @@ +-----BEGIN CERTIFICATE----- +MIICijCCAfWgAwIBAgIESFo7ITALBgkqhkiG9w0BAQUwezELMAkGA1UEBhMCVVMx +EDAOBgNVBAoTB1NvbWVPcmcxDzANBgNVBAsTBlNvbWVPVTESMBAGA1UEBxMJU29t +ZXdoZXJlMQswCQYDVQQIEwJDQTEoMCYGA1UEAxMfc29tZU5hbWUgKG5vdCBuZWNl +c3NhcmlseSBETlMhKTAeFw0wODA2MTkxMDU1MzJaFw0xMTAzMTYxMDU1MzlaMA0x +CzAJBgNVBAYTAlVTMIGcMAsGCSqGSIb3DQEBAQOBjAAwgYgCgYC+f6yCet2WJgmw +tgukOReI+avRHOfr2hLhIQkSzCOiNi0tNWMKmaQWw/D+y1FvLRq0wLDUyJK/36rB +67HKfscoNeClKTS8jhAs1mPjT57iyuoqK6VW/d2JoofklRCgDIZQrNfxHiOO+kN3 +ShLmkGqxkA3YyUty/JmF6PKWYIhQWQIDAQABo4GPMIGMMAwGA1UdEwEB/wQCMAAw +HQYDVR0lBBYwFAYIKwYBBQUHAwIGCCsGAQUFBwMBMB0GA1UdEQQWMBSCEmNsaWVu +dC5leGFtcGxlLm5ldDAdBgNVHQ4EFgQUrDcwsuOF4RiHn0eboCplJSiUhfcwHwYD +VR0jBBgwFoAU+/6WjRCnOuW3DXtDSIbI+HKZe4kwCwYJKoZIhvcNAQEFA4GBAAAh +niy9ORW2AIb6lk/sa3iYczeYpGzxDM9bLZ1xSoIdoHM/v9gPG/WpAZ4ECHjx+Yk8 +4B/9gvaAmMi0FmcoIBQaEOe2P8tcIuzmum3N2F27F2+J4httiNDLJoseWVnXJUvS +dPyVOrKXdl5vVFpmViI5P+VzzMqbAQ6oNlMXIh6e +-----END CERTIFICATE----- diff --git a/tests/testsuites/x.509/client-key.pem b/tests/testsuites/x.509/client-key.pem new file mode 100644 index 00000000..05641213 --- /dev/null +++ b/tests/testsuites/x.509/client-key.pem @@ -0,0 +1,15 @@ +-----BEGIN RSA PRIVATE KEY----- +MIICWwIBAAKBgQC+f6yCet2WJgmwtgukOReI+avRHOfr2hLhIQkSzCOiNi0tNWMK +maQWw/D+y1FvLRq0wLDUyJK/36rB67HKfscoNeClKTS8jhAs1mPjT57iyuoqK6VW +/d2JoofklRCgDIZQrNfxHiOO+kN3ShLmkGqxkA3YyUty/JmF6PKWYIhQWQIDAQAB +AoGAVxrM+BqTIJlC/Ay5lP1QAB9di3ACserUkCFJY1F5h63rCU1sfIfVKl2s3+x6 +z3GZ0QV8tccCpv5wN1x8vqEqkbOvddM3rzpGkEC5PoyfCzuQBun1wnHK/JKjrfk5 +PvcaP60eTNjHZC7w78gOJJCzgzsEMrndtE+55diPmqGVtXMCQQDTZBy5WK8gZwMO +rRz1BKKyBeMYMfTJoJafGfxp0H8AUbTa0V2eb+el3kuzPCm3FQ6IgaHyGj2WqkAw +M0bfAfdXAkEA5rLna1t+2SCtgSd1DotndA4EsH4skBq9kFeD2/8T6Pf13zmBOq6O +4aNEOhgBE/R9/MI4XoU9MbOlkZvKvDuXzwJADdWSb6rXIza6o34+0+Yuw5nRB+dV +DtD8qoLn2wDzHtE6Fcv35YOLVHac26kHTd0J63MYZyDCgRa5Rq5EaBnX1wJAQYRF +XKPbXmZ9X9SI1dyZQMhKZKUwmqw9caSo+e1zBhKFbSOzo6q3QTVQxv7SL4ybyxCN +WaqVOmw+dR+9b7+s2QJAdNAw3r418rWKFKJJNTSqSqr1sYqiKvrQL6w2dpdpAeY4 +3VDCz/7/F9AEn3R7K3fZLQ7W6M62LSEjxxc1Y3LIpQ== +-----END RSA PRIVATE KEY----- diff --git a/tests/testsuites/x.509/machine-cert.pem b/tests/testsuites/x.509/machine-cert.pem new file mode 100644 index 00000000..fa2fd36e --- /dev/null +++ b/tests/testsuites/x.509/machine-cert.pem @@ -0,0 +1,18 @@ +-----BEGIN CERTIFICATE----- +MIIC7TCCAligAwIBAgIESFo4GTALBgkqhkiG9w0BAQUwezELMAkGA1UEBhMCVVMx +EDAOBgNVBAoTB1NvbWVPcmcxDzANBgNVBAsTBlNvbWVPVTESMBAGA1UEBxMJU29t +ZXdoZXJlMQswCQYDVQQIEwJDQTEoMCYGA1UEAxMfc29tZU5hbWUgKG5vdCBuZWNl +c3NhcmlseSBETlMhKTAeFw0wODA2MTkxMDQyNTRaFw0xMTAzMTYxMDQyNTdaMG8x +CzAJBgNVBAYTAlVTMRAwDgYDVQQKEwdTb21lT3JnMQ8wDQYDVQQLEwZTb21lT1Ux +EjAQBgNVBAcTCVNvbWV3aGVyZTELMAkGA1UECBMCQ0ExHDAaBgNVBAMTE21hY2hp +bmUuZXhhbXBsZS5uZXQwgZwwCwYJKoZIhvcNAQEBA4GMADCBiAKBgLJOW6lIHv8u +c6Ez7tiir64vI3aRuDmUACPybyWtyWqrLebzYtg+borWHj9y5di54NB5wpQhZQsQ +U2awNqanzUYeLGqbecbuxuLtsKlZ4knax+PwHOBTmIcN1SjbpII27Toe0VwHE5Vd +sygFFyorto6OeNLPrIcTFfwXQ2sVw325AgMBAAGjgZAwgY0wDAYDVR0TAQH/BAIw +ADAdBgNVHSUEFjAUBggrBgEFBQcDAgYIKwYBBQUHAwEwHgYDVR0RBBcwFYITbWFj +aGluZS5leGFtcGxlLm5ldDAdBgNVHQ4EFgQUDOHD29GdMfoDWwev4uDvItkLKKww +HwYDVR0jBBgwFoAU+/6WjRCnOuW3DXtDSIbI+HKZe4kwCwYJKoZIhvcNAQEFA4GB +AMt1iED7QzFL2Qk6VivoFY15S2XGF8rJTd3l00bwyLA5qLyLBGlB6z4qkYu7/7SW +5r7tet+1DezgHrj/1eU289m410wnQB8fGwcVLp6OX2PAlhNmVLcsipiN6rielAcP +aIg/VlBtoCFp/ymTLKgvh6DLKWhRUkFPqO2WtcQ3UUo+ +-----END CERTIFICATE----- diff --git a/tests/testsuites/x.509/machine-key.pem b/tests/testsuites/x.509/machine-key.pem new file mode 100644 index 00000000..808f00c9 --- /dev/null +++ b/tests/testsuites/x.509/machine-key.pem @@ -0,0 +1,15 @@ +-----BEGIN RSA PRIVATE KEY----- +MIICXAIBAAKBgQCyTlupSB7/LnOhM+7Yoq+uLyN2kbg5lAAj8m8lrclqqy3m82LY +Pm6K1h4/cuXYueDQecKUIWULEFNmsDamp81GHixqm3nG7sbi7bCpWeJJ2sfj8Bzg +U5iHDdUo26SCNu06HtFcBxOVXbMoBRcqK7aOjnjSz6yHExX8F0NrFcN9uQIDAQAB +AoGABHJs2c95Km8bpikX62I/VG5LiaD/wbvdtwfMWtm3PMhRKEHotLD169OERJvW +fK3CHCD1R+F/ViPNmLGLY2Oq/GqKjhKjg4sqAznw8TImBSgXCFho4sl38z+luP1o +TXFDgfV5HDDW1/F5kJlBIfXBLFdl4VO7E0ZnFt4FqSDRW2MCQQDRun/sBGM4i9hM +QdC+QwrdcgCScBpzbz4YXtI9TyGEqNahg8kXgIVUbzDdRmG68G2M98USzRs5DWB7 +YvYwmRoPAkEA2aUdUpFRb/n7XfsAiFLYOk96C82iCCQpJi0si34zlCAEbCRbQ6zw +gVDMCMSccnnWrVzqtxfN+rXycFTNyDFTtwJAPRwymfrNTnSxGcczo7y1NcE6GXFA +w9HuLfuzFtov0g/AOl/EAG0abHfZrSAM6gOUaDbp3YiWHhGfw1QamB6EUQJAClTb +MnsxeXZNZ2Wt3crI9uOk8IB/a5GD3osQbUK9Yg+vBg8nweuoswrJ1LS4lHqSJUKe +5bgckAUpEAoGhrVIuwJBAKIuqx/cSjF4Oa9xT6DzBRe7vAlKFq62lUV5SLfoSEgY +L5dvPBgAD0Styglny1s0Bu5FTlkxlFOMvUAD/O5hsQw= +-----END RSA PRIVATE KEY----- diff --git a/tests/testsuites/x.509/request.pem b/tests/testsuites/x.509/request.pem new file mode 100644 index 00000000..c612325c --- /dev/null +++ b/tests/testsuites/x.509/request.pem @@ -0,0 +1,10 @@ +-----BEGIN NEW CERTIFICATE REQUEST----- +MIIBWDCBxAIBADANMQswCQYDVQQGEwJVUzCBnDALBgkqhkiG9w0BAQEDgYwAMIGI +AoGAvn+sgnrdliYJsLYLpDkXiPmr0Rzn69oS4SEJEswjojYtLTVjCpmkFsPw/stR +by0atMCw1MiSv9+qweuxyn7HKDXgpSk0vI4QLNZj40+e4srqKiulVv3diaKH5JUQ +oAyGUKzX8R4jjvpDd0oS5pBqsZAN2MlLcvyZhejylmCIUFkCAwEAAaARMA8GCSqG +SIb3DQEJBzECEwAwCwYJKoZIhvcNAQEFA4GBAA6mBaHFuRvcJVNoU7wDFcDexjvC +QLpDpFRSbKcKdNEQLBRD8ZNVOY4WBXQE2pE84//QnygQPKPCHSqUVdPPBabi5y2E +A2XvgYyKsrFbsrpKrVkPz5oQB4V7FRytQaQoBi//BSOu3dMaimLcAhfNQZCrQeu8 +SYWdJi5OPvrYGvgT +-----END NEW CERTIFICATE REQUEST----- |