23 files changed, 322 insertions, 11 deletions
diff --git a/tests/Makefile.am b/tests/Makefile.am
index c5deaa47..4ba7db75 100644
--- a/tests/Makefile.am
+++ b/tests/Makefile.am
@@ -2,8 +2,12 @@ if ENABLE_TESTBENCH
 TESTRUNS = rt_init rscript
 check_PROGRAMS = $(TESTRUNS) ourtail nettester tcpflood chkseq
 TESTS = $(TESTRUNS) cfg.sh \
+	arrayqueue.sh \
+	linkedlistqueue.sh \
+	da-mainmsg-q.sh \
 	validation-run.sh \
 	imtcp-multiport.sh \
+	daqueue-persist.sh \
 	diskqueue.sh \
 	diskqueue-fsync.sh \
 	manytcp.sh \
@@ -17,6 +21,7 @@ TESTS += omod-if-array.sh \
 	 inputname.sh \
 	 threadingmq.sh \
 	 threadingmqaq.sh \
+	 discard.sh \
 	 fieldtest.sh
 endif
 
@@ -73,6 +78,7 @@ EXTRA_DIST= 1.rstest 2.rstest 3.rstest err1.rstest \
 	   testsuites/1.parse1 \
 	   testsuites/2.parse1 \
 	   testsuites/3.parse1 \
+	   testsuites/4.parse1 \
 	   testsuites/oversizeTag-1.parse1 \
 	   testsuites/date1.parse1 \
 	   testsuites/date2.parse1 \
@@ -84,6 +90,10 @@ EXTRA_DIST= 1.rstest 2.rstest 3.rstest err1.rstest \
 	   testsuites/rfc5424-2.parse1 \
 	   testsuites/rfc5424-3.parse1 \
 	   testsuites/rfc5424-4.parse1 \
+	   testsuites/malformed1.parse1 \
+	   testsuites/reallife.parse1 \
+	   testsuites/parse2.conf \
+	   testsuites/reallife.parse2 \
 	   testsuites/omod-if-array.conf \
 	   testsuites/1.omod-if-array \
 	   testsuites/1.field1 \
@@ -92,6 +102,12 @@ EXTRA_DIST= 1.rstest 2.rstest 3.rstest err1.rstest \
 	   fieldtest.sh \
 	   diskqueue.sh \
 	   testsuites/diskqueue.conf \
+	   arrayqueue.sh \
+	   testsuites/arrayqueue.conf \
+	   linkedlistqueue.sh \
+	   testsuites/linkedlistqueue.conf \
+	   da-mainmsg-q.sh \
+	   testsuites/da-mainmsg-q.conf \
 	   diskqueue-fsync.sh \
 	   testsuites/diskqueue-fsync.conf \
 	   imtcp-multiport.sh \
@@ -104,8 +120,12 @@ EXTRA_DIST= 1.rstest 2.rstest 3.rstest err1.rstest \
 	   testsuites/1.inputname_imtcp_12515 \
 	   testsuites/1.inputname_imtcp_12516 \
 	   omod-if-array.sh \
+	   discard.sh \
+	   testsuites/discard.conf \
 	   diag.sh \
 	   testsuites/diag-common.conf \
+           daqueue-persist.sh \
+	   daqueue-persist-drvr.sh \
 	   queue-persist.sh \
 	   queue-persist-drvr.sh \
 	   testsuites/queue-persist.conf \
diff --git a/tests/arrayqueue.sh b/tests/arrayqueue.sh
new file mode 100755
index 00000000..baf303f3
--- /dev/null
+++ b/tests/arrayqueue.sh
@@ -0,0 +1,17 @@
+# Test for fixedArray queue mode
+# added 2009-05-20 by rgerhards
+# This file is part of the rsyslog project, released  under GPLv3
+echo \[arrayqueue.sh\]: testing queue fixedArray queue mode
+source $srcdir/diag.sh init
+source $srcdir/diag.sh startup arrayqueue.conf
+
+# 40000 messages should be enough
+source $srcdir/diag.sh injectmsg  0 40000
+
+# terminate *now* (don't wait for queue to drain!)
+kill `cat rsyslog.pid`
+
+# now wait until rsyslog.pid is gone (and the process finished)
+source $srcdir/diag.sh wait-shutdown 
+source $srcdir/diag.sh seq-check 39999
+source $srcdir/diag.sh exit
diff --git a/tests/da-mainmsg-q.sh b/tests/da-mainmsg-q.sh
new file mode 100755
index 00000000..d502fca3
--- /dev/null
+++ b/tests/da-mainmsg-q.sh
@@ -0,0 +1,31 @@
+# Test for DA mode on the main message queue
+# This test checks if DA mode operates correctly. To do so,
+# it uses a small in-memory queue size, so that DA mode is initiated
+# rather soon, and disk spooling used. There is some uncertainty (based
+# on machine speeds), but in general the test should work rather well.
+# We add a few messages after the initial run, just so that we can
+# check everything recovers from DA mode correctly.
+# added 2009-04-22 by Rgerhards
+# This file is part of the rsyslog project, released  under GPLv3
+echo "[da-mainmsg-q.sh]: testing main message queue in DA mode (going to disk)"
+source $srcdir/diag.sh init
+source $srcdir/diag.sh startup da-mainmsg-q.conf
+
+# part1: send first 50 messages (in memory, only)
+#source $srcdir/diag.sh tcpflood 127.0.0.1 13514 1 50
+source $srcdir/diag.sh injectmsg 0 50
+source $srcdir/diag.sh wait-queueempty # let queue drain for this test case
+
+# part 2: send bunch of messages. This should trigger DA mode
+#source $srcdir/diag.sh injectmsg 50 20000
+source $srcdir/diag.sh injectmsg 50 2000
+ls -l test-spool	 # for manual review
+
+# send another handful
+source $srcdir/diag.sh injectmsg 2050 50
+#sleep 1 # we need this so that rsyslogd can receive all outstanding messages
+
+# clean up and check test result
+source $srcdir/diag.sh shutdown-when-empty # shut down rsyslogd when done processing messages
+source $srcdir/diag.sh seq-check 2099
+source $srcdir/diag.sh exit
diff --git a/tests/daqueue-persist-drvr.sh b/tests/daqueue-persist-drvr.sh
new file mode 100755
index 00000000..d36a6be5
--- /dev/null
+++ b/tests/daqueue-persist-drvr.sh
@@ -0,0 +1,40 @@
+# Test for queue data persisting at shutdown. The
+# plan is to start an instance, emit some data, do a relatively
+# fast shutdown and then re-start the engine to process the 
+# remaining data.
+# added 2009-05-27 by Rgerhards
+# This file is part of the rsyslog project, released  under GPLv3
+# uncomment for debugging support:
+echo testing memory daqueue persisting to disk, mode $1
+source $srcdir/diag.sh init
+
+# prepare config
+echo \$MainMsgQueueType $1 > work-queuemode.conf
+echo "*.*     :omtesting:sleep 0 1000" > work-delay.conf
+
+export RSYSLOG_DEBUG="debug nostdout noprintmutexaction"
+export RSYSLOG_DEBUGLOG="log0"
+
+# inject 10000 msgs, so that DO hit the high watermark
+source $srcdir/diag.sh startup queue-persist.conf
+source $srcdir/diag.sh injectmsg 0 10000
+$srcdir/diag.sh shutdown-immediate
+$srcdir/diag.sh wait-shutdown
+source $srcdir/diag.sh check-mainq-spool
+
+echo "Enter phase 2, rsyslogd restart"
+
+#exit
+
+export RSYSLOG_DEBUG="debug nostdout noprintmutexaction"
+export RSYSLOG_DEBUGLOG="log"
+#valgrind="valgrind --tool=helgrind --log-fd=1"
+
+# restart engine and have rest processed
+#remove delay
+echo "#" > work-delay.conf
+source $srcdir/diag.sh startup queue-persist.conf
+source $srcdir/diag.sh shutdown-when-empty # shut down rsyslogd when done processing messages
+$srcdir/diag.sh wait-shutdown
+source $srcdir/diag.sh seq-check 0 99999
+source $srcdir/diag.sh exit
diff --git a/tests/daqueue-persist.sh b/tests/daqueue-persist.sh
new file mode 100755
index 00000000..ff81c987
--- /dev/null
+++ b/tests/daqueue-persist.sh
@@ -0,0 +1,12 @@
+# Test for queue data persisting at shutdown. We use the actual driver
+# to carry out multiple tests with different queue modes
+# added 2009-05-27 by Rgerhards
+# This file is part of the rsyslog project, released  under GPLv3
+echo TEST: daqueue-persist.sh
+source $srcdir/daqueue-persist-drvr.sh LinkedList
+source $srcdir/daqueue-persist-drvr.sh FixedArray
+# the disk test should not fail, however, the config is extreme and using
+# it more or less is a config error
+source $srcdir/daqueue-persist-drvr.sh Disk
+# we do not test Direct mode because this absolute can not work in direct mode
+# (maybe we should do a fail-type of test?)
diff --git a/tests/diag.sh b/tests/diag.sh
index 13bb877d..b6b39a4b 100755
--- a/tests/diag.sh
+++ b/tests/diag.sh
@@ -9,7 +9,7 @@
 #valgrind="valgrind --tool=drd --log-fd=1"
 #valgrind="valgrind --tool=helgrind --log-fd=1"
 #set -o xtrace
-#export RSYSLOG_DEBUG="debug nostdout printmutexaction"
+#export RSYSLOG_DEBUG="debug nostdout noprintmutexaction"
 #export RSYSLOG_DEBUGLOG="log"
 case $1 in
    'init')	$srcdir/killrsyslog.sh # kill rsyslogd if it runs for some reason
@@ -39,6 +39,12 @@ case $1 in
 		while test -f rsyslog.pid; do
 			true
 		done
+		if [ -e core.* ]
+		then
+		   echo "ABORT! core file exists, starting interactive shell"
+		   bash
+		   exit 1
+		fi
 		;;
    'wait-queueempty') # wait for main message queue to be empty
 		echo WaitMainQueueEmpty | java -classpath $abs_top_builddir DiagTalker
@@ -84,7 +90,7 @@ case $1 in
 		;;
    'nettester') # perform nettester-based tests
    		# use -v for verbose output!
-		./nettester -t$2 -i$3
+		./nettester -t$2 -i$3 $4
 		if [ "$?" -ne "0" ]; then
 		  exit 1
 		fi
diff --git a/tests/discard.sh b/tests/discard.sh
new file mode 100755
index 00000000..0fafc7d9
--- /dev/null
+++ b/tests/discard.sh
@@ -0,0 +1,16 @@
+# Test for discard functionality
+# This test checks if discard works. It is not a perfect test but
+# will find at least segfaults and obviously not discarded messages.
+# added 2009-07-30 by Rgerhards
+# This file is part of the rsyslog project, released  under GPLv3
+# uncomment for debugging support:
+echo TEST discard.sh: testing discard functionality
+source $srcdir/diag.sh init
+source $srcdir/diag.sh startup discard.conf
+# 20000 messages should be enough - the disk test is slow enough ;)
+sleep 4
+source $srcdir/diag.sh tcpflood 127.0.0.1 13514 1 10 1
+source $srcdir/diag.sh shutdown-when-empty # shut down rsyslogd when done processing messages
+source $srcdir/diag.sh wait-shutdown
+source $srcdir/diag.sh seq-check 10 -s2
+source $srcdir/diag.sh exit
diff --git a/tests/inputname.sh b/tests/inputname.sh
index e1a58517..71f11c1e 100755
--- a/tests/inputname.sh
+++ b/tests/inputname.sh
@@ -1,4 +1,4 @@
-echo testing $InputTCPServerInputName directive
+echo \[inputname.sh\]: testing $InputTCPServerInputName directive
 $srcdir/killrsyslog.sh # kill rsyslogd if it runs for some reason
 
 echo port 12514
diff --git a/tests/linkedlistqueue.sh b/tests/linkedlistqueue.sh
new file mode 100755
index 00000000..72c2a403
--- /dev/null
+++ b/tests/linkedlistqueue.sh
@@ -0,0 +1,17 @@
+# Test for Linkedlist queue mode
+# added 2009-05-20 by rgerhards
+# This file is part of the rsyslog project, released  under GPLv3
+echo testing queue Linkedlist queue mode
+source $srcdir/diag.sh init
+source $srcdir/diag.sh startup linkedlistqueue.conf
+
+# 40000 messages should be enough
+source $srcdir/diag.sh injectmsg  0 40000
+
+# terminate *now* (don't wait for queue to drain)
+kill `cat rsyslog.pid`
+
+# now wait until rsyslog.pid is gone (and the process finished)
+source $srcdir/diag.sh wait-shutdown 
+source $srcdir/diag.sh seq-check 0 39999
+source $srcdir/diag.sh exit
diff --git a/tests/nettester.c b/tests/nettester.c
index 209c2a6f..3ab96e62 100644
--- a/tests/nettester.c
+++ b/tests/nettester.c
@@ -47,6 +47,7 @@
 #include <signal.h>
 #include <netinet/in.h>
 #include <getopt.h>
+#include <errno.h>
 
 #define EXIT_FAILURE 1
 #define INVALID_SOCKET -1
@@ -61,6 +62,7 @@ static char *testSuite = NULL; /* name of current test suite */
 static int iPort = 12514; /* port which shall be used for sending data */
 static char* pszCustomConf = NULL;	/* custom config file, use -c conf to specify */
 static int verbose = 0;	/* verbose output? -v option */
+static int IPv4Only = 0;	/* use only IPv4 in rsyslogd call? */
 
 /* these two are quick hacks... */
 int iFailed = 0;
@@ -90,6 +92,7 @@ void readLine(int fd, char *ln)
 	if(verbose)
 		fprintf(stderr, "begin readLine\n");
 	lenRead = read(fd, &c, 1);
+
 	while(lenRead == 1 && c != '\n') {
 		if(c == '\0') {
 			*ln = c;
@@ -102,6 +105,11 @@ void readLine(int fd, char *ln)
 	}
 	*ln = '\0';
 
+	if(lenRead < 0) {
+		printf("read from rsyslogd returned with error '%s' - aborting test\n", strerror(errno));
+		exit(1);
+	}
+
 	if(verbose)
 		fprintf(stderr, "end readLine, val read '%s'\n", orig);
 }
@@ -147,7 +155,7 @@ tcpSend(char *buf, int lenBuf)
 					fprintf(stderr, "connect() failed\n");
 					return(1);
 				} else {
-					usleep(100000); /* 0.1 sec, these are us! */
+					usleep(100000); /* ms = 1000 us! */
 				}
 			}
 		} 
@@ -214,7 +222,7 @@ int openPipe(char *configFile, pid_t *pid, int *pfd)
 	int pipefd[2];
 	pid_t cpid;
 	char *newargv[] = {"../tools/rsyslogd", "dummy", "-c4", "-u2", "-n", "-irsyslog.pid",
-			   "-M../runtime/.libs:../.libs", NULL };
+			   "-M../runtime/.libs:../.libs", NULL, NULL};
 	char confFile[1024];
 	char *newenviron[] = { NULL };
 	/* debug aide...
@@ -226,6 +234,9 @@ int openPipe(char *configFile, pid_t *pid, int *pfd)
 		(pszCustomConf == NULL) ? configFile : pszCustomConf);
 	newargv[1] = confFile;
 
+	if(IPv4Only)
+		newargv[(sizeof(newargv)/sizeof(char*)) - 2] = "-4";
+
 	if (pipe(pipefd) == -1) {
 		perror("pipe");
 		exit(EXIT_FAILURE);
@@ -308,6 +319,10 @@ processTestFile(int fd, char *pszFileName)
 
 		/* pull response from server and then check if it meets our expectation */
 		readLine(fd, buf);
+		if(strlen(buf) == 0) {
+			printf("something went wrong - read a zero-length string from rsyslogd");
+			exit(1);
+		}
 		if(strcmp(expected, buf)) {
 			++iFailed;
 			printf("\nExpected Response:\n'%s'\nActual Response:\n'%s'\n",
@@ -315,10 +330,13 @@ processTestFile(int fd, char *pszFileName)
 				ret = 1;
 		}
 
+		/* clean up after the try */
+		free(testdata);
+		testdata = NULL;
+		free(expected);
+		expected = NULL;
 	}
 
-	free(testdata);
-	free(expected);
 	fclose(fp);
 	return(ret);
 }
@@ -372,11 +390,24 @@ doTests(int fd, char *files)
 	return(iFailed);
 }
 
+
+/* indicate that our child has died (where it is not permitted to!).
+ */
+void childDied(__attribute__((unused)) int sig)
+{
+	printf("ERROR: child died unexpectedly (maybe a segfault?)!\n");
+	exit(1);
+}
+
+
 /* cleanup */
 void doAtExit(void)
 {
 	int status;
 
+	/* disarm died-child handler */
+	signal(SIGCHLD, SIG_IGN);
+
 	if(rsyslogdPid != 0) {
 		kill(rsyslogdPid, SIGTERM);
 		waitpid(rsyslogdPid, &status, 0);	/* wait until instance terminates */
@@ -399,8 +430,11 @@ int main(int argc, char *argv[])
 	char buf[4096];
 	char testcases[4096];
 
-	while((opt = getopt(argc, argv, "c:i:p:t:v")) != EOF) {
+	while((opt = getopt(argc, argv, "4c:i:p:t:v")) != EOF) {
 		switch((char)opt) {
+                case '4':
+			IPv4Only = 1;
+			break;
                 case 'c':
 			pszCustomConf = optarg;
 			break;
@@ -457,6 +491,9 @@ int main(int argc, char *argv[])
 	}
 	fclose(fp);
 
+	/* arm died-child handler */
+	signal(SIGCHLD, childDied);
+
 	/* start to be tested rsyslogd */
 	openPipe(testSuite, &rsyslogdPid, &fd);
 	readLine(fd, buf);
@@ -467,5 +504,6 @@ int main(int argc, char *argv[])
 		ret = 1;
 
 	if(verbose) printf("End of nettester run (%d).\n", ret);
+
 	exit(ret);
 }
diff --git a/tests/parsertest.sh b/tests/parsertest.sh
index ef33256e..470d9375 100755
--- a/tests/parsertest.sh
+++ b/tests/parsertest.sh
@@ -1,5 +1,13 @@
-echo TEST: parsertest.sh - various parser tests
+echo TEST: \[parsertest.sh\]: various parser tests
 source $srcdir/diag.sh init
 source $srcdir/diag.sh nettester parse1 udp
 source $srcdir/diag.sh nettester parse1 tcp
+source $srcdir/diag.sh nettester parse2 udp
+source $srcdir/diag.sh nettester parse2 tcp
+
+echo \[parsertest.sh]: redoing tests in IPv4-only mode
+source $srcdir/diag.sh nettester parse1 udp -4
+source $srcdir/diag.sh nettester parse1 tcp -4
+source $srcdir/diag.sh nettester parse2 udp -4
+source $srcdir/diag.sh nettester parse2 tcp -4
 source $srcdir/diag.sh init
diff --git a/tests/queue-persist-drvr.sh b/tests/queue-persist-drvr.sh
index ea5386a7..53fbcb8b 100755
--- a/tests/queue-persist-drvr.sh
+++ b/tests/queue-persist-drvr.sh
@@ -24,5 +24,6 @@ source $srcdir/diag.sh check-mainq-spool
 echo "#" > work-delay.conf
 source $srcdir/diag.sh startup queue-persist.conf
 source $srcdir/diag.sh shutdown-when-empty # shut down rsyslogd when done processing messages
+$srcdir/diag.sh wait-shutdown
 source $srcdir/diag.sh seq-check 0 4999
 source $srcdir/diag.sh exit
diff --git a/tests/queue-persist.sh b/tests/queue-persist.sh
index 999655b1..e05b3da3 100755
--- a/tests/queue-persist.sh
+++ b/tests/queue-persist.sh
@@ -2,6 +2,7 @@
 # to carry out multiple tests with different queue modes
 # added 2009-05-27 by Rgerhards
 # This file is part of the rsyslog project, released  under GPLv3
+echo TEST: queue-persist.sh
 source $srcdir/queue-persist-drvr.sh LinkedList
 source $srcdir/queue-persist-drvr.sh FixedArray
 # the disk test should not fail, however, the config is extreme and using
diff --git a/tests/rt-init.c b/tests/rt-init.c
index aaac7ed1..b9c4ce2e 100644
--- a/tests/rt-init.c
+++ b/tests/rt-init.c
@@ -21,10 +21,9 @@
  *
  * A copy of the GPL can be found in the file "COPYING" in this distribution.
  */
-#include <stdio.h>
-
 #include "rsyslog.h"
 #include "testbench.h"
+#include <stdio.h>	/* must be last, else we get a zlib compile error on some platforms */
 
 MODULE_TYPE_TESTBENCH
 
diff --git a/tests/testsuites/4.parse1 b/tests/testsuites/4.parse1
new file mode 100644
index 00000000..07e2445a
--- /dev/null
+++ b/tests/testsuites/4.parse1
@@ -0,0 +1,4 @@
+<29>Jul 31 21:39:21 example-b example-gw[10538]: disconnect host=/192.0.2.1 destination=192.0.2.2/11282 in=3274 out=1448 duration=0
+29,daemon,notice,Jul 31 21:39:21,example-b,example-gw,example-gw[10538]:, disconnect host=/192.0.2.1 destination=192.0.2.2/11282 in=3274 out=1448 duration=0
+# yet another real-life sample where we had some issues with - the important
+# part is the dash inside the hostname!
diff --git a/tests/testsuites/arrayqueue.conf b/tests/testsuites/arrayqueue.conf
new file mode 100644
index 00000000..c5874a83
--- /dev/null
+++ b/tests/testsuites/arrayqueue.conf
@@ -0,0 +1,14 @@
+# Test for queue fixedArray mode (see .sh file for details)
+# rgerhards, 2009-04-17
+$IncludeConfig diag-common.conf
+
+$ModLoad ../plugins/imtcp/.libs/imtcp
+$MainMsgQueueTimeoutShutdown 10000
+$InputTCPServerRun 13514
+
+# set spool locations and switch queue to disk-only mode
+$MainMsgQueueType FixedArray
+
+$template outfmt,"%msg:F,58:2%\n"
+$template dynfile,"rsyslog.out.log" # trick to use relative path names!
+:msg, contains, "msgnum:" ?dynfile;outfmt
diff --git a/tests/testsuites/da-mainmsg-q.conf b/tests/testsuites/da-mainmsg-q.conf
new file mode 100644
index 00000000..843a3e4f
--- /dev/null
+++ b/tests/testsuites/da-mainmsg-q.conf
@@ -0,0 +1,21 @@
+# Test for DA mode in main message queue (see .sh file for details)
+# rgerhards, 2009-04-22
+$ModLoad ../plugins/imtcp/.libs/imtcp
+$MainMsgQueueTimeoutShutdown 10000
+$InputTCPServerRun 13514
+
+$IncludeConfig diag-common.conf
+
+# set spool locations and switch queue to disk assisted mode
+$WorkDirectory test-spool
+$MainMsgQueueSize 200 # this *should* trigger moving on to DA mode...
+# note: we must set QueueSize sufficiently high, so that 70% (light delay mark)
+# is high enough above HighWatermark!
+$MainMsgQueueHighWatermark 80
+$MainMsgQueueLowWatermark 40
+$MainMsgQueueFilename mainq
+$MainMsgQueueType linkedlist
+
+$template outfmt,"%msg:F,58:2%\n"
+$template dynfile,"rsyslog.out.log" # trick to use relative path names!
+:msg, contains, "msgnum:" ?dynfile;outfmt
diff --git a/tests/testsuites/discard.conf b/tests/testsuites/discard.conf
new file mode 100644
index 00000000..bbe2fe77
--- /dev/null
+++ b/tests/testsuites/discard.conf
@@ -0,0 +1,13 @@
+# Test for discard functionality
+# rgerhards, 2009-07-30
+$IncludeConfig diag-common.conf
+
+$ModLoad ../plugins/imtcp/.libs/imtcp
+$MainMsgQueueTimeoutShutdown 10000
+$InputTCPServerRun 13514
+
+:msg, contains, "00000001" ~
+
+$template outfmt,"%msg:F,58:2%\n"
+$template dynfile,"rsyslog.out.log" # trick to use relative path names!
+:msg, contains, "msgnum:" ?dynfile;outfmt
diff --git a/tests/testsuites/linkedlistqueue.conf b/tests/testsuites/linkedlistqueue.conf
new file mode 100644
index 00000000..92a9649c
--- /dev/null
+++ b/tests/testsuites/linkedlistqueue.conf
@@ -0,0 +1,16 @@
+# Test for queue LinkedList mode (see .sh file for details)
+# rgerhards, 2009-04-17
+$IncludeConfig diag-common.conf
+
+$ModLoad ../plugins/imtcp/.libs/imtcp
+$MainMsgQueueTimeoutShutdown 10000
+$InputTCPServerRun 13514
+
+$ErrorMessagesToStderr off
+
+# set spool locations and switch queue to disk-only mode
+$MainMsgQueueType LinkedList
+
+$template outfmt,"%msg:F,58:2%\n"
+$template dynfile,"rsyslog.out.log" # trick to use relative path names!
+:msg, contains, "msgnum:" ?dynfile;outfmt
diff --git a/tests/testsuites/malformed1.parse1 b/tests/testsuites/malformed1.parse1
new file mode 100644
index 00000000..2d95170d
--- /dev/null
+++ b/tests/testsuites/malformed1.parse1
@@ -0,0 +1,5 @@
+<131>Oct  8 23:05:06 10.321.1.123 05",result_code=200,b
+131,local0,err,Oct  8 23:05:06,10.321.1.123,05",result_code=200,b,05",result_code=200,b
+# a somewhat mangeld-with real-life sample of a malformed message
+# the key here is not what is being parsed, but that we do not abort!
+# NOTE: if a parser enhancement breaks the format, this is probably OK
diff --git a/tests/testsuites/parse2.conf b/tests/testsuites/parse2.conf
new file mode 100644
index 00000000..04d910bc
--- /dev/null
+++ b/tests/testsuites/parse2.conf
@@ -0,0 +1,8 @@
+$ModLoad ../plugins/omstdout/.libs/omstdout
+$IncludeConfig nettest.input.conf	# This picks the to be tested input from the test driver!
+
+$ErrorMessagesToStderr off
+
+# use a special format that we can easily parse in expect
+$template output,"%PRI%,%syslogfacility-text%,%syslogseverity-text%,%timestamp%,%programname%,%syslogtag%,%msg%\n"
+*.* :omstdout:;output
diff --git a/tests/testsuites/reallife.parse1 b/tests/testsuites/reallife.parse1
new file mode 100644
index 00000000..a83d2dca
--- /dev/null
+++ b/tests/testsuites/reallife.parse1
@@ -0,0 +1,12 @@
+# New tests should be added to this file if there is no specific
+# reason for not doing that. Initially, we could only handle one test
+# case per file, but this restriction has been removed some time ago.
+# So it is less troublesome (and easier to overlook) to have all related
+# tests in a single file.
+# This file contains a lot of real-life samples (of course mangled so
+# that they can not be traced back to the original submitter). Note
+# that IP addr 192.0.2.1 is specifically set aside for testing and
+# documentation by IANA.
+# rgerhards, 2009-10-19
+<29>Oct 16 20:47:24 example-p exam-pl[12345]: connect host= /192.0.2.1
+29,daemon,notice,Oct 16 20:47:24,example-p,exam-pl,exam-pl[12345]:, connect host= /192.0.2.1
diff --git a/tests/testsuites/reallife.parse2 b/tests/testsuites/reallife.parse2
new file mode 100644
index 00000000..c42f2526
--- /dev/null
+++ b/tests/testsuites/reallife.parse2
@@ -0,0 +1,12 @@
+# New tests should be added to this file if there is no specific
+# reason for not doing that. Initially, we could only handle one test
+# case per file, but this restriction has been removed some time ago.
+# So it is less troublesome (and easier to overlook) to have all related
+# tests in a single file.
+# This file contains a lot of real-life samples (of course mangled so
+# that they can not be traced back to the original submitter). Note
+# that IP addr 192.0.2.1 is specifically set aside for testing and
+# documentation by IANA.
+# rgerhards, 2009-10-19
+<175>Oct 16 23:47:31 #001 MSWinEventLog 0#011Security#01119023582#011Fri Oct 16 16:30:44 2009#011592#011Security#011rgabcde#011User#011Success Audit#011XSXSXSN01#011Detailed Tracking#011#0112572#01119013885
+175,local5,debug,Oct 16 23:47:31,#001,#001, MSWinEventLog 0#011Security#01119023582#011Fri Oct 16 16:30:44 2009#011592#011Security#011rgabcde#011User#011Success Audit#011XSXSXSN01#011Detailed Tracking#011#0112572#01119013885